Okwu mmalite
Thank you for choosing the REDTIGER 11.5Ft USB Type-C Power Cord. This cable is specifically designed to provide a stable power supply to your REDTIGER series dash camera. Its extended length allows for flexible installation within your vehicle.
Important Note: This power cord is for power delivery only and does not support data transfer functions.
Image: The REDTIGER 11.5Ft USB Type-C Power Cord, showing the USB-A connector on one end and the right-angle USB-C connector on the other.
Ozi nchekwa
- Ensure the power source in your vehicle provides the correct voltage and current for your dash camera.
- Do not modify or attempt to repair the power cord. Contact customer support if damaged.
- Keep the cable away from extreme heat, moisture, and sharp objects.
- Route the cable securely to avoid interference with vehicle controls or driver visibility.
Ihe ngwugwu
Ngwungwu ahụ gụnyere:
- 1 x REDTIGER 11.5Ft USB Type-C Power Cord
Ntuziaka nhazi
- Jikọọ na Dash Cam: Insert the USB Type-C end of the power cord into the corresponding port on your REDTIGER dash camera. Ensure a firm connection.
Foto: nso nso view of the right-angle USB Type-C connector securely plugged into the dash camera's power input port.
- Nyefee eriri USB: Carefully route the 11.5-foot power cord along the edges of your vehicle's interior, such as under the dashboard, along the A-pillar, and across the headliner. Use cable clips (not included) if necessary to secure the cable and prevent it from obstructing your view ma ọ bụ njikwa ụgbọ ala.
Image: An illustration demonstrating the recommended cable routing path from the dash camera, along the windshield and A-pillar, down to the car's power outlet.
- Jikọọ na Isi Iyi: Plug the USB Type-A end of the power cord into a compatible USB power adapter (e.g., a car charger or USB port) in your vehicle.
Image: A close-up of the USB-A connector inserted into a car charger, indicating the power input connection.
- Nyochaa ike: Once connected, your dash camera should power on, indicating a successful connection.
Ntuziaka ọrụ
This power cord operates on a simple plug-and-play principle. Once properly connected to a power source and your dash camera, it will continuously supply power, allowing your dash camera to function as intended. No additional configuration is required for the power cord itself.
Remember: This cable is exclusively for power. It cannot be used to transfer files, update firmware, or perform any data-related functions between your dash camera and another device.
Nlekọta
- Keep the cable clean and free from dust and debris.
- Zere ịgbagọ ma ọ bụ kpaa eriri ahụ nke ọma, n'ihi na nke a nwere ike imebi waya dị n'ime.
- Do not pull on the cable itself when disconnecting; always grasp the connector housing.
- Store the cable in a cool, dry place when not in use.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Dash camera does not power on. |
|
|
| Cable is too short for desired routing. | Incorrect length assessment. | The 11.5ft length is fixed. Plan routing carefully or consider alternative power solutions if this length is insufficient. |
Nkọwapụta
- Akara: REDTIGER
- Ụdị: 11.5 Ft
- Ụdị njikọ: USB Type-C (male) to USB Type-A (male)
- Ụdị eriri: USB Power USB
- Ogologo: 11.5 ụkwụ (ihe dị ka mita 3.5)
- Ọrụ: Power Only (No Data Transfer)
- Ngwa dakọtara: REDTIGER series dash cameras
- Agba: Nwa
- Njirimara Pụrụ Iche: Lightweight, Durable Design
Akwụkwọ ikike na nkwado
REDTIGER provides an 18-month assurance service for this power cord, ensuring it meets your expectations and remains in top condition.
For any questions, technical assistance, or warranty claims, please contact REDTIGER customer support.
- Ndị ọrụ nlekọta ndị ahịa: Available 24/7 via Email or Phone.
- Iwu nloghachi: 7-day return policy and return on defects.
Image: Icons representing REDTIGER's customer support channels: 24-hour service, email, and phone support.
