Okwu mmalite
The CYCPLUS 20PSI Rechargeable Paddleboard Pump is an intelligent, fast, and versatile solution for inflating and deflating your paddleboard, inflatable boat, tent, or mattress. With its dual-stage inflation function, this pump ensures a quick and efficient inflation process, while the auto-off feature adds a layer of safety and convenience. The pump boasts a dual LED display, making it easy to monitor the pressure, which can reach up to 20 pounds per square inch. This pump is designed to cater to paddleboards and is suitable for other inflatable items as well. Created by the trusted brand CYCPLUS, this pump is a must-have accessory for all paddleboard enthusiasts.
Image: The CYCPLUS 20PSI Rechargeable Paddleboard Pump shown with its included seven gas nozzles, highlighting its versatility for various inflatables.
Atụmatụ igodo
- Fast Dual-Stage Inflation: Offers a 1st stage for maximum speed at up to 430L/min and a 2nd stage for maximum pressure at 120L/min, inflating a 10.6FT standard paddle board from 0-15PSI in approximately 5 minutes.
- Batrị enwere ike ịchaji ikike dị elu: Equipped with a 5200mAh battery, capable of inflating up to five 10.6FT standard paddle boards to 15PSI on a single charge. Supports 30W fast charging, fully recharging in 3.5 hours.
- Intelligent Auto-Off Function: Automatically turns off when the preset target pressure is reached, preventing over-inflation and potential damage to inflatables.
- Ngosipụta LED abụọ: Features a clear digital LED display for real-time pressure monitoring and setting the desired PSI with high precision (accuracy less than 0.2PSI).
- Portable and Cordless Operation: Designed for use anywhere without the need for an external power source, offering ultimate convenience for outdoor activities.
- Ntọala Nozzle ọ bụla: Includes 7 air nozzles to suit a wide range of high-pressure inflatable products, such as paddle boards, inflatable boats, surfing kites, beach balls, and inflatable pools.
Image: The pump connected to a paddleboard, illustrating its fast inflation speed and dual-stage airflow rates (430 L/min for first stage, 120 L/min for second stagna).
Image: The CYCPLUS pump positioned next to a paddleboard, emphasizing its 5200mAh battery capacity, which can inflate multiple boards.
Foto: nkọwa zuru ezu view of the pump's dual LED display, indicating both the current pressure ("NOW") and the target pressure ("TAR").
Image: A visual comparison highlighting the CYCPLUS pump's battery-powered portability, eliminating the need for car power.
Image: An illustration of the seven different gas nozzles provided with the pump, demonstrating their compatibility with various inflatables like paddleboards, beach balls, tents, kayaks, and mattresses.
Ntuziaka nhazi
1. Charging the Pump
Before first use, fully charge the pump using the provided Type-C charging cable and 30W fast charging charger. The LED display will indicate the battery level during charging.
2. Attaching the Air Hose
Connect one end of the air tube to the inflation port on the pump (typically marked for inflation). Ensure a secure connection to prevent air leakage.
3. Selecting the Correct Nozzle
Identify the appropriate air nozzle for your inflatable item. The pump comes with 7 different nozzles to accommodate various valve types. Attach the selected nozzle firmly to the other end of the air hose.
Ntuziaka ọrụ
Ọnụ ego efu
- Connect the air hose with the correct nozzle to your inflatable's valve.
- Turn on the CYCPLUS pump.
- Use the control buttons to set your desired target pressure (PSI) on the dual LED display. Refer to your inflatable's manufacturer recommendations for optimal pressure.
- Press the start button to begin inflation. The pump will automatically switch from the high-speed first stage to the high-pressure second stage dị ka achọrọ.
- The pump will automatically stop once the preset pressure is reached.
Deflation
The CYCPLUS pump also features a deflation function to quickly remove air from your inflatables for compact storage.
- Connect the air hose to the deflation port on the pump (if separate, otherwise use the same port as inflation but ensure the pump is set to deflate mode).
- Connect the appropriate nozzle to your inflatable's valve.
- Activate the deflation function on the pump. The pump will draw air out of the inflatable.
- Once deflation is complete, disconnect the hose and store your inflatable.
Image: The pump illustrating its hassle-free operation for both inflation and deflation of a paddleboard.
Nlekọta
- Keep the pump clean and free from sand, dirt, and debris. Wipe the exterior with a damp akwa .
- Ensure the air intake and exhaust vents are clear and unobstructed to prevent overheating.
- Chekwaa mgbapụta ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
- Regularly check the air hose and nozzles for any signs of wear or damage. Replace if necessary to maintain optimal performance.
- Charge the battery periodically even if not in use to maintain battery health.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Mgbapụta ọkụ anaghị agbanwu. | Batrị dị ala ma ọ bụ enweghị ụgwọ. | Charge the pump fully using the provided charger. |
| Pump inflates slowly or not to desired pressure. | Incorrect nozzle, loose connection, or obstructed air vents. | Ensure correct nozzle is used and securely attached. Check for kinks in the hose. Clear any obstructions from vents. |
| Pump stops before reaching target PSI. | Battery is low or internal safety mechanism activated due to overheating. | Recharge the pump. Allow the pump to cool down if it feels hot. |
| Inflatable does not hold air after inflation. | Valve on inflatable is not properly sealed or inflatable has a leak. | Ensure the inflatable's valve is fully closed and sealed. Check the inflatable for punctures. |
Nkọwapụta
- Aha nlereanya: D17PRO
- Akara: CYCPLUS
- Agba: Agba ntụ
- Ihe: Plastic
- Ibu ihe: 3.64 pound
- Ikike mbugharị ikuku: 430 LPM (1st stage)
- Oke nrụgide: 20 Paụnd kwa square inch (PSI)
- Ike batrị: 5200mAh (implied from 5200mAh provides battery endurance guarantee)
- Ịchaji: Nchaji Ngwa Ngwa 30W (Ụdị-C)
- Akụkụ (L x W x H): 10.35 x 7.24 x 5.98 inches (Item Package Dimensions)
- Ngwa gụnyere: Air tube *1, Type-C charging cable*1, 30W Fast Charging charger*1, Gas nozzle *7
Image: The CYCPLUS pump compared in size to an iPad Air 4, illustrating its compact and lightweight design.
Ozi akwụkwọ ikike
The CYCPLUS 20PSI Rechargeable Paddleboard Pump comes with a Akwụkwọ ikike afọ abụọ from the manufacturer. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or contact CYCPLUS customer support.
Nkwado ndị ahịa
For any questions, technical assistance, or support regarding your CYCPLUS 20PSI Rechargeable Paddleboard Pump, please visit the official CYCPLUS websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. I nwekwara ike ileba anya na CYCPLUS Store on Amazon maka ozi ngwaahịa na akụrụngwa ndị ọzọ.
