1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your BHI 12,000 BTU 115-Volt, 17 SEER2, Wi-Fi Ductless Mini Split Air Conditioner with Heat Pump. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent damage or injury. Keep this manual for future reference.
The BHI mini-split system is designed to provide efficient cooling and heating for spaces up to 600 sq. ft., featuring Wi-Fi connectivity for convenient control and a heat pump for year-round comfort.
2. Ozi nchekwa
Na-agbaso usoro nchekwa ndị a mgbe niile ka ibelata ihe egwu nke ọkụ, ujo eletrik, ma ọ bụ mmerụ ahụ.
- Achọrọ nwụnye ọkachamara: Installation, maintenance, and repair of this appliance must be performed by qualified service personnel. Improper installation can lead to electric shock, fire, or water leakage.
- Nchekwa Eletriki: Ensure the power supply matches the unit's specifications (115-Volt). Do not use extension cords. Always disconnect power before servicing.
- Nchekwa friji: This unit contains R410A refrigerant. Handle with care and ensure proper ventilation during installation and servicing.
- Nwepu: Debe oghere zuru oke gburugburu ma n'ime ụlọ ma n'èzí maka ikuku ikuku kwesịrị ekwesị na ohere ọrụ.
- Ụmụaka na anụ ụlọ: Debe ụmụaka na anụ ụlọ n'ebe a na-arụ ọrụ na nlekọta.
- Enweghị ihe mgbochi: Do not block the air inlet or outlet of either unit.
- Mgbapu mmiri: Ensure proper drainage for condensate to prevent water damage.
3. Ihe ngwugwu
Upon unpacking, verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
Figure 3.1: Complete BHI Mini Split Air Conditioner System Components.
This image displays the full package contents, including the indoor air handler, the outdoor condenser unit, the wireless remote control, and the 16.4 ft. pre-charged lineset, along with other installation accessories.
- Ngalaba ime ụlọ (Onye njikwa ikuku)
- Ngalaba dị n'èzí (condenser)
- Njikwa ime ikuku ikuku
- 16.4 ft. Pre-charged Lineset
- Igbapu sooks
- Igwe ọkụ eletrik
- Installation Accessories (e.g., wall sleeve, insulation tape)
- Akwụkwọ ntuziaka (akwụkwọ a)
4. Akụrụngwa Ngwaahịa
4.1 Njikwa Wi-Fi
The BHI mini split system features integrated Wi-Fi connectivity, allowing users to easily control the air conditioner from outside the home via a smart device. This provides convenient and intelligent life management of your indoor climate.
4.2 Outdoor Unit Heating Belt
The BHI Outdoor Unit is equipped with a "Heating Belt" that operates via a temperature sensor. If the ambient temperature drops below 32°F (0°C), the heating belt will automatically activate to prevent the outdoor unit from freezing. It will deactivate once the temperature rises above 32°F (0°C), ensuring reliable operation in cold climates.
4.3 "I Set" Function
The "I Set" function allows the unit to automatically memorize your preferred settings. With just one button press, you can recall your customized comfort preferences, simplifying operation.
4.4 "I Feel" Function and Louver Position Memory
Enwere m mmetụta: This feature utilizes a built-in temperature sensor in the remote controller to monitor the surrounding temperature more accurately. This allows the air conditioner to adjust the room temperature precisely, providing enhanced comfort.
Ebe nchekwa Louver: The unit remembers the last louver position. When the unit is restarted, the louvers will automatically return to their previously set position.
5. Ntọala na nwụnye
Installation of this mini split system requires specialized tools and knowledge. It is strongly recommended that installation be performed by a certified HVAC professional to ensure safety, proper operation, and warranty validity.
5.1 Akụkụ akụkụ
Figure 5.1: Indoor and Outdoor Unit Dimensions.
This image provides detailed measurements for both the indoor air handler and the outdoor condenser unit, crucial for planning installation space and clearances.
- Ime ụlọ:
- Ogologo: 30.59 sentimita asatọ
- Ogologo: 11.91 sentimita asatọ
- Omimi: 9.84 inch
- N'èzí:
- Ogologo: 30.59 sentimita asatọ
- Ogologo: 19.63 sentimita asatọ
- Omimi: 11.41 inch
5.2 General Installation Steps (Overview maka ọkachamara)
- Ndobe nkeji ime ụlọ: Select a suitable location on an interior wall, ensuring adequate space for airflow and maintenance.
- Ndokwa Ngalaba N'èzí: Choose a stable, level outdoor location with sufficient clearance for airflow and service access.
- Drilling Wall Hole: Create a hole through the wall for the refrigerant lines, drain hose, and electrical cables.
- Lineset Connection: Connect the pre-charged 16.4 ft. lineset between the indoor and outdoor units. Ensure proper flaring and torque.
- Ọkụ eletrik: Connect the power supply and communication wiring according to the wiring diagram provided with the unit. Ensure proper grounding.
- Njikọ mmiri mmiri: Connect the condensate drain hose from the indoor unit to an appropriate drainage point.
- Vacuuming and Leak Test: Evacuate the refrigerant lines to remove air and moisture, then perform a leak test.
- Nwale ọsọ: After installation, perform a test run to verify proper operation in all modes.
6. Ntuziaka ọrụ
Your BHI mini split system is controlled primarily by the wireless remote control. Familiarize yourself with the remote's functions for optimal use.
Foto nke 6.1: Njikwa Ime Obodo Ikuku.
This image shows the layout of the wireless remote control, which is used to operate the BHI mini split air conditioner.
6.1 Ọrụ njikwa anya
| Bọtịnụ | Ọrụ |
|---|---|
| Ike (⏻) | Gbanyụọ otu ahụ ma ọ bụ gbanyụọ. |
| MODE | Na-eme usoro site na ụdị ọrụ: Auto, Cool, Dry, Heat, Fan. |
| TEMP (▲/▼) | Na-agbanwe okpomọkụ edobere. |
| MMA | Na-emezi ọsọ fan ( akpaaka, dị ala, ọkara, dị elu). |
| SWING (↕/↔) | Controls vertical (up/down) and horizontal (left/right) louver swing. |
| TIMER | Na-edobe ngụ oge ngbanyụ/ Gbanyụọ maka ịrụ ọrụ akpaka. |
| TURBO | Activates rapid cooling or heating for quick temperature changes. |
| ECO | Engages energy-saving mode. |
| MUTU | Silences beeps or sounds from the unit. |
| Ụra | Na-eme ka okpomọkụ na ọsọ fan dịkwuo mma maka ụra dị mma. |
| Ngosipụta | Turns the indoor unit's display ON or OFF. |
| Ọ NA-ECHE M | Activates the remote's temperature sensor for more accurate room temperature sensing. |
| M-SET | Recalls previously saved preferred settings. |
6.2 Wi-Fi App Control
For Wi-Fi control, download the dedicated BHI smart app from your device's app store. Follow the in-app instructions to connect your mini split unit to your home Wi-Fi network. Once connected, you can control the unit's functions remotely, set schedules, and monitor its status.
7. Nlekọta
Regular maintenance ensures the longevity and efficiency of your BHI mini split system. Always disconnect power to the unit before performing any maintenance.
7.1 Nchacha ikuku ikuku
The indoor unit's air filters should be cleaned every two weeks or more frequently depending on usage and air quality.
- Mepee akụkụ ihu nke ime ụlọ.
- Wepu ihe nzacha ikuku.
- Jiri ihe nhicha ikuku hichaa nzacha ahụ ma ọ bụ jiri mmiri ọkụ na ihe nhicha dị nro saa ha.
- Allow filters to dry completely in a shaded area before reinstalling.
- Tinyegharịa ihe nzacha ma mechie akụkụ ihu.
7.2 Nhicha nke ihe dị n'èzí
Periodically inspect the outdoor unit for debris, leaves, or dirt that may obstruct airflow. Gently clean the coils with a soft brush or water hose. Do not use high-pressure water directly on electrical components.
7.3 Ọrụ Ndị ọkachamara
It is recommended to have a qualified HVAC technician perform annual professional maintenance, including checking refrigerant levels, electrical connections, and overall system performance.
8. Nchọpụta nsogbu
Tupu ịkpọtụrụ ọrụ, review nsogbu ndị a na-ahụkarị na ihe ngwọta ha nwere ike ime.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Otu anaghị agbanwuo. | No power supply; Remote control batteries dead; Circuit breaker tripped. | Check power connection; Replace remote batteries; Reset circuit breaker. |
| Ezughi oke jụrụ oyi/ọkụ. | Dirty air filters; Blocked outdoor unit; Incorrect mode setting; Low refrigerant. | Clean air filters; Clear obstructions from outdoor unit; Select correct mode; Contact professional for refrigerant check. |
| Mwepu mmiri sitere na nkeji ime ụlọ. | Clogged drain hose; Improper installation. | Clear drain hose; Contact professional for inspection. |
| Mkpọtụ na -adịghị ahụkebe. | Loose parts; Fan obstruction; Compressor issue. | Check for loose parts; Clear obstructions; Contact professional. |
| Nsogbu njikọ Wi-Fi. | Incorrect Wi-Fi password; Router too far; App issues. | Verify password; Move router closer or use extender; Reinstall app. |
If the problem persists after attempting these solutions, please contact BHI customer support or a qualified service technician.
9. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | BHI-T17-12K115V-US-C |
| Ike jụrụ oyi | 12,000 BTU |
| Voltage | 115-Volt |
| Oke SEER2 | 17 SEER2 |
| Mpaghara mkpuchi | Ruo 600 sq. ft. |
| Typedị Refrigerant | R410A |
| Ogologo Lineset | 16.4 ft. (Pre-charged) |
| Akụkụ ngwaahịa (Ngalaba ime ụlọ) | 30.59 x 11.91 x 9.84 inch (W x H x D) |
| Nha Ngwaahịa (Ngalaba Mpụta) | 30.59 x 19.63 x 11.41 inch (W x H x D) |
| Ibu Ibu | 68.33 Pounds (Total system weight) |
| Onye nrụpụta | BHI |
10. Akwụkwọ ikike na nkwado
For specific warranty terms and conditions, please refer to the warranty card included with your product packaging or visit the official BHI websaịtị. Debe ihe akaebe nke ịzụrụ maka akwụkwọ ikike.
If you require technical assistance, have questions about operation, or need to report an issue, please contact BHI customer support. Contact information can typically be found on the manufacturer's websaịtị ma ọ bụ na nkwakọ ngwaahịa.
