EKO Mirage Semi-Round Sensor Bin EK9331 45L Instruction Manual

1. Ngwaahịa gafereview

The EKO Mirage Semi-Round Sensor Bin EK9331 is a modern, contactless waste solution designed for various environments. It features an infrared sensor for automatic lid operation, a durable stainless steel construction, and a semi-round shape for efficient space utilization.

Image 1.1: The EKO Mirage Semi-Round Sensor Bin with its lid in the open position, showcasing the internal structure and the deodorizer compartment.

Akụkụ ndị bụ isi:

• Contactless infrared sensor for automatic opening and closing.
• Manual lid opening option for extended use or specific tasks.
• Durable stainless steel construction with a special coating to prevent fingerprints.
• Semi-round design for efficient placement against walls or in corners.
• Electronic touch control system.
• Suitable for residential, organizational, and institutional premises.

2. Ihe ngwugwu

Biko hụ na akụrụngwa niile dị tupu ịmalite na nhazi.

• EKO Mirage Semi-Round Sensor Bin (Main Unit)
• Ime Liner
• Inner Bin
• Akwụkwọ ntuziaka (akwụkwọ a)

Mara: Four AA batteries are required for operation and are not included in the package.

3. Nhazi ntuziaka

1. Unpack the Bin: Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
2. Wụnye batrị:
   • Locate the battery compartment, typically on the underside of the lid or at the back of the unit.
   • Mepee mkpuchi nke batrị batrị.
   • Tinye batrị AA anọ (4) iji hụ na polarity ziri ezi (+/-).
   • Mechie mkpuchi nke batrị batrị nke ọma.
   

   Foto 3.1: Zuru ezu view of the lid's underside, indicating the battery box location and the deodorizer pocket. The bin operates with 4 AA batteries, featuring a power-saving design.

3. Insert Inner Bin and Liner:
   • Place the inner bin into the main unit.
   • Fit a suitable trash bag (liner) into the inner bin, ensuring the edges are neatly tucked.
4. Position the Bin: Place the bin in your desired location. The semi-round shape allows it to fit snugly against a wall.
   

   Image 3.2: The semi-round design of the EKO Sensor Bin allows it to be placed flush against a wall, optimizing space and preventing accidental bumps due to its rounded corners.

4. Ntuziaka ọrụ

4.1 Automatic Sensor Operation

1. Mee ihe mmetụta: Ensure batteries are installed and the bin is powered on (if there's a power switch, typically located near the battery compartment).
2. Mepee mkpuchi: Wave your hand or an object approximately 10-15 cm above the sensor located on the lid. The lid will open automatically.
3. Mechie mkpuchi: The lid will close automatically after a few seconds of inactivity.

4.2 Manual Lid Operation

For situations requiring the lid to remain open for an extended period, or if batteries are depleted, you can operate the lid manually.

• Gently lift the lid by hand to open it.
• To close, gently push the lid down until it is fully shut.

4.3 Ọrụ dị jụụ

The EKO Sensor Bin features a unique spring and hinge system designed for quiet operation, minimizing noise during opening and closing cycles.

Image 4.1: This diagram highlights EKO's proprietary "Spring & Hinge System" which supports rotation with a spring, allowing the lid to open and close smoothly and quietly, avoiding the noise typically associated with gear-driven mechanisms.

5. Nlekọta na nlekọta

Regular cleaning and proper care will ensure the longevity and optimal performance of your EKO Sensor Bin.

• Nchacha mpụta: Jiri ihe dị nro, d hichaa mpụta ígwè anaghị agba nchara.amp cloth. For stubborn marks, use a stainless steel cleaner. Avoid abrasive cleaners or scourers that may damage the finish. The special coating helps prevent greasy fingerprints.
• Ime nhicha: Remove the inner bin and wash it with mild soap and water. Rinse thoroughly and dry completely before placing it back into the main unit. The inner bin is made of stain-resistant plastic for easy cleaning.
• Nchacha mkpuchi: Jiri mgbasa ozi hichaa mkpuchi ahụamp cloth. Ensure no water enters the battery compartment or sensor area.
• Deodorizer Pocket: The lid features a deodorizer pocket. Replace the deodorizer filter periodically as needed (deodorizer sold separately).
• Ngbanwe batrị: Replace all four AA batteries when the sensor operation becomes sluggish or stops working. Always use new batteries of the same type.

6. Nchọpụta nsogbu

7. Nkọwapụta

Image 7.1: Visual representation of the EKO Sensor Bin's dimensions in centimeters and a summary of its key specifications including capacity, power source, and materials.

8. Akwụkwọ ikike na nkwado

EKO is committed to providing high-quality products and customer satisfaction.

8.1 Akwụkwọ ikike nke otu afọ

Ngwaahịa a na-abịa na a one-year free repair service from the date of purchase. To avail of warranty service, please provide proof of purchase (warranty card and receipt) indicating the purchase date and store.

8.2 Nkwado Gọọmentị

For official support and inquiries, please contact EKO customer service. Support is available for genuine products purchased through authorized channels. Products that are OEM or parallel imports may not be covered by EKO Japan's support.

Oge nkwado: Weekdays 9:00-12:00 / 13:00-17:00 (Excluding Saturdays, Sundays, Public Holidays, Summer, and Winter holidays).

Image 8.1: Information regarding EKO's official support, 1-year free repair warranty, and confirmation of genuine product sales through authorized retailers like Amazon.co.jp.