efperfect Modern 3 Lights Glass Pendant Light Instruction Manual

Okwu mmalite

Daalụ maka ịzụrụasing the efperfect Modern 3 Lights Glass Pendant Light, model EF1408736001. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This pendant light features three distinct smoky gray glass lampshades, designed to enhance various indoor spaces with a blend of modern and vintagna aesthetics.

Figure 1: The efperfect Modern 3 Lights Glass Pendant Light, showcasing its design in a bright room.

Figure 2: The pendant light enhancing a dining room setting.

Figure 3: The pendant light providing illumination in a bedroom.

Ozi nchekwa

• Ịdọ aka ná ntị: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
• Ensure the fixture is securely mounted to a structural component of the ceiling.
• Agafela oke wattage akọwapụtara maka bọlbụ ahụ.
• Jiri nlezianya jikwaa ihe ndị mejupụtara iko ka ọ ghara imebi.
• Emebere ihe ndozi a maka naanị ime ụlọ.

Ihe ngwugwu

Nyochaa na akụrụngwa niile dị na emebighị ya tupu ịga n'ihu na ntinye.

• Ceiling Canopy with integrated wiring
• 3 Glass Lampshades (various shapes and sizes)
• Mounting Hardware (crossbar, mounting screws, wire connectors)
• Adjustable Hanging Wires (pre-attached to canopy and lamp ndị njide)
• Akwụkwọ ntuziaka

Rịba ama: A naghị etinye bọlbụ ọkụ E26 n'ime ya, a ga-azụrịrị ya iche iche.

Nkọwapụta

Ntọala na nwụnye

Professional installation is recommended. Ensure power is OFF at the circuit breaker before proceeding.

1. Kwadebe maka nwụnye

• Turn off electricity at the main fuse box or circuit breaker.
• Jiri nlezianya kewaa ihe niile dị na ya ma lelee ma ọ bụrụ na ihe ọ bụla mebiri emebi.
• Chịkọta ngwaọrụ dị mkpa (skrudriver, waya ndị na-ewepụ ihe, teepu eletriki, steepụ).

2. Mount the Crossbar

Attach the mounting crossbar to the junction box in your ceiling using the provided screws. Ensure it is securely fastened.

Figure 4: Installation diagram illustrating the mounting process and electrical connections.

3. Njikọ waya

• Jikọọ waya ala nke ihe eji arụ ọrụ ahụ (nke a na-ejikarị ọla kọpa ma ọ bụ akwụkwọ ndụ akwụkwọ ndụ) na waya ala ụlọ.
• Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
• Connect the fixture's live wire (usually black) to the house live wire (black).
• Secure all connections with wire connectors and wrap with electrical tape for added safety.

Ọgụgụ 5: Zuru ezu view of the ceiling canopy and wiring points before final installation.

4. Secure the Ceiling Canopy

Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting screws on the crossbar and secure it with the provided decorative nuts or screws.

5. Adjust Hanging Wires

The hanging wires for each glass globe are adjustable. To adjust the length, gently push the small pin on the canopy where the wire enters, then pull or push the wire to the desired length. Release the pin to lock the wire in place. Ensure the wires are taut and the globes hang evenly or as desired.

Figure 6: The three distinct glass shades with adjustable hanging wires, allowing for customized arrangement.

6. Install Light Bulbs

Screw E26 base bulbs (not included) into each lamp holder. Ensure bulbs are fully seated. The fixture supports incandescent, LED, CFL, and halogen bulbs up to 60W each. For dimming functionality, use dimmable E26 bulbs and a compatible dimmer switch (not included).

Figure 7: Detail of an E26 bulb correctly installed within a glass shade.

7. Attach Glass Shades

Carefully attach each glass lampshade to its respective lamp holder according to the design. Ensure they are securely fastened but do not overtighten.

Figure 8: The efperfect pendant light installed, demonstrating its aesthetic appeal in a living space.

Ntuziaka ọrụ

• Agbanye/ Gbanyụọ: Once installed and power is restored, operate the light fixture using your wall switch.
• Ọrụ na-ebelata: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity by using the dimmer switch.

Figure 9: Visual representation of the dimmable feature and potential light color temperatures when using compatible bulbs.

Nlekọta

• Nhicha: Disconnect power before cleaning. Wipe the fixture and glass shades with a soft, dry, or slightly damp Ákwà. Ejila ihe nhicha ma ọ bụ ihe mgbaze, n'ihi na ha nwere ike imebi ihe ma ọ bụ iko ahụ.
• Ndokwa bọlbụ: Ensure power is off. Allow bulbs to cool completely before attempting to replace them. Unscrew the old bulb and screw in a new E26 bulb of the appropriate wattage (max 60W).

Nchọpụta nsogbu

Ozi akwụkwọ ikike

efperfect offers a 60-day return service for any damaged or defective product. Additionally, free replacement is provided for any non-working or broken part within five years of purchase. Please retain your proof of purchase for warranty claims.

Nkwado ndị ahịa

If you encounter any issues or have questions regarding your efperfect Modern 3 Lights Glass Pendant Light, please contact our customer support team. We aim to respond to inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official efperfect store online.

Thank you for choosing efperfect.