Parkside PPMA 20-Li C3 Cordless Polisher User Manual

1. Okwu mmalite

This manual provides important information for the safe operation, setup, maintenance, and troubleshooting of your Parkside PPMA 20-Li C3 Cordless Polisher. Please read this manual thoroughly before using the device for the first time and keep it for future reference.

The Parkside PPMA 20-Li C3 is a cordless polisher designed for polishing tasks and repairing minor scratches and wash residues on vehicle surfaces. It features a compact design with non-slip Softgrip, a 150 mm polishing pad with practical Velcro attachment, and a 6-level speed adjustment.

2. Ntuziaka nchekwa

ỊDỌ AKA NA NTỊ: Gụọ ịdọ aka ná ntị nchekwa, ntụziaka, nkọwa na nkọwapụta enyere na ngwa ike a. Ọdịda ịgbaso ntuziaka niile edepụtara n'okpuru nwere ike bute ujo ọkụ eletrik, ọkụ na/ma ọ bụ mmerụ ahụ dị egwu.

Nchekwa Ngwá Ọrụ Ike Ozuruọnụ

• Nchekwa mpaghara ọrụ: Keep work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Nchekwa Eletriki: Zenarị mmetụ ahụ n'elu ala ala ma ọ bụ n'ala dị ka ọkpọkọ, radiators, ranges, na friji. Enwere nnukwu ihe ize ndụ nke ujo eletrik ma ọ bụrụ na ahụ gị agbaala n'ala ma ọ bụ gbatuo.
• Nchekwa nkeonwe: Yiri nchebe anya mgbe niile. Jiri ngwa nchedo onwe onye dị ka ihe mkpuchi uzuzu, akpụkpọ ụkwụ nchekwa na-adịghị skid, okpu siri ike, ma ọ bụ nchebe anụ mgbe ọ dị mma. Nọrọ na nche, lelee ihe ị na-eme, ma jiri ezi uche mee ihe mgbe ị na-arụ ọrụ ike.
• Iji na Nlekọta Ngwa: Ejila ike amanye ngwaọrụ ike. Jiri ngwaọrụ ike kwesịrị ekwesị maka ngwa gị. Ejila ngwaọrụ ike ma ọ bụrụ na mgbanyụ ọkụ ahụ agbanyụghị ya ma ọ bụ gbanyụọ ya. Kwụpụ ngwugwu batrị ahụ na ngwaọrụ ike tupu ịme mgbanwe ọ bụla, ịgbanwe ngwa, ma ọ bụ chekwaa ngwaọrụ ike.
• Eji na Nlekọta batrị: Fanye naanị na chaja nke onye nrụpụta kwuru. Jiri ngwaọrụ ọkụ naanị na ngwugwu batrị ahapụtara.

Specific Polisher Safety

• Always ensure the polishing pad is securely attached before operation.
• Do not apply excessive pressure to the polisher; let the tool do the work.
• Debe aka na uwe rụrụ arụ pụọ na akụkụ ndị na-atụgharị.
• Ensure the work surface is clean and free of debris that could cause damage.

3. Ngwaahịa gafereview

Familiarize yourself with the components of your Parkside PPMA 20-Li C3 Cordless Polisher.

Image: The Parkside PPMA 20-Li C3 Cordless Polisher, showing its compact design, Softgrip handle, and the battery slot at the rear. The polishing pad attachment is visible at the front.

Ngwa gụnyere:

• Parkside PPMA 20-Li C3 Cordless Polisher
• Medium-hardness polishing sponge (Ø 150 mm)
• 1 spana
• Akpa nchekwa
• Rịba ama: Batrị na chaja adịghị na ya.

4. Nhazi

4.1 Attaching the Polishing Pad

1. Ensure the polisher is switched off and the battery is removed.
2. Align the polishing sponge (or other compatible polishing accessory) with the Velcro backing pad on the polisher.
3. Press the sponge firmly onto the backing pad to ensure a secure attachment. The Velcro system allows for quick and easy changes.

4.2 Ịtinye batrị

1. Ensure the battery is fully charged. This polisher is compatible with all batteries from the PARKSIDE X 20 V Team series.
2. Slide the charged battery pack into the battery slot at the rear of the polisher until it clicks securely into place.
3. Iji wepụ batrị ahụ, pịa bọtịnụ ntọhapụ dị na ngwugwu batrị wee wepụ ya.

5. Ntuziaka ọrụ

5.1 Preparing the Surface

• Clean the surface to be polished thoroughly to remove dirt, dust, and debris.
• Apply a small amount of polishing paste directly to the polishing sponge or the surface.

5.2 Mgbanwe Ike na Ọsọ

1. Hold the polisher firmly with both hands using the Softgrip areas.
2. Press the ON/OFF switch to start the polisher.
3. Use the 6-level speed adjustment dial to select the desired rotation speed (2300-4500 rpm). Start with a lower speed for spreading polish and increase as needed for effective polishing.

5.3 Polishing Technique

Image: A person wearing gloves is operating the Parkside PPMA 20-Li C3 Cordless Polisher on the hood of a car, demonstrating its use for surface polishing.

• Move the polisher slowly and evenly over the surface in overlapping passes.
• Apply light, consistent pressure. Avoid pressing too hard, as this can overheat the surface or damage the paint.
• Work on small sections at a time to ensure thorough and even polishing.
• After polishing, wipe off any residue with a clean microfiber cloth.

5.4 Gbanyụọ

Release the ON/OFF switch to turn off the polisher. Always wait for the polishing pad to stop completely before setting the tool down.

6. Nlekọta

6.1 Nhicha

• Wepu ngwugwu batrị mgbe niile tupu ihicha ya.
• Jiri ihe dị nro hichaa mpụta ngwaọrụ ahụamp akwa . Ejila ihe nhicha siri ike ma ọ bụ ihe mgbaze.
• Clean the polishing pads after each use. They can often be washed with mild soap and water, then air-dried.
• Keep the ventilation openings free from dust and debris to prevent overheating.

6.2 Nchekwa

• Store the polisher and its accessories in the provided storage case.
• Debe ya n'ebe kpọrọ nkụ, ebe ikuku na-anaghị eru ya aka, ebe ụmụaka na-agaghị eru ya aka.
• Remove the battery pack from the tool before long-term storage.

7. Nchọpụta nsogbu

Ọ bụrụ na nsogbu ahụ anọgide mgbe ị nwalechara ngwọta ndị a, kpọtụrụ ndị ọrụ nkwado ndị ahịa.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the manufacturer directly. This manual does not contain specific warranty terms or support contact details.

Manufacturer: PARKSIDE®