1. Okwu mmalite
The Speedlink TOKEN RGB Gaming Stereo Speaker system delivers powerful stereo sound combined with dynamic RGB lighting, enhancing your gaming and multimedia experience. Designed for versatility, it offers both wired and wireless connectivity options, making it suitable for various devices including PCs, laptops, tablets, and smartphones.
This manual provides detailed instructions on setting up, operating, and maintaining your Speedlink TOKEN speakers to ensure optimal performance and longevity.
Image 1: Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.
2. Ihe ngwugwu
Biko lelee ngwungwu maka ihe ndị a:
- 2 x Speedlink TOKEN RGB Stereo Speakers
- Integrated Wired Remote Control (attached to speakers)
- USB-A Power Cable (integrated)
- Eriri ọdịyo Jack 3.5mm (ejikọtara ọnụ)
3. Nhazi
3.1 Njikọ anụ ahụ
- Ndokwa: Place the two speaker units on either side of your monitor or desired listening area. The cable length between satellites is 1.2 meters (2x0.6m), providing flexibility for optimal stereo separation.
- Njikọ ike: Connect the integrated USB-A cable to an available USB port on your computer, laptop, or a USB power adapter (not included). The speakers are powered via USB.
- Njikọ Audio:
- 3.5mm Jack: For wired audio, connect the integrated 3.5mm audio jack to the audio output port (headphone jack) of your computer, laptop, tablet, or smartphone.
- Bluetooth: For wireless audio, ensure the speakers are powered on. The speakers will automatically enter Bluetooth pairing mode if no 3.5mm connection is detected or selected.
Image 2: USB Power Connection.
Image 3: Audio Connection Options (Bluetooth and 3.5mm Jack).
4. Ntuziaka ọrụ
The Speedlink TOKEN speakers are controlled via the integrated wired remote control.
Image 4: Wired Remote Control.
4.1 Gbanyụọ/ Gbanyụọ na njikwa olu
- Ike: Use the dedicated power button on the wired remote to turn the speakers on or off.
- Olu: Adjust the volume using the rotary dial or slider on the wired remote.
4.2 Switching Audio Input (Jack / Bluetooth)
The wired remote control features a button to switch between the 3.5mm jack input and Bluetooth input. Press this button to toggle between the two modes.
4.3 Njikọ Bluetooth
- Ensure the speakers are powered on and the Bluetooth input mode is selected (indicated by an LED on the remote).
- On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Chọọ maka available devices. The speakers should appear as "Speedlink TOKEN" or similar.
- Select the speakers to pair. Once paired, the Bluetooth indicator on the remote will stabilize, and you can play audio wirelessly.
Ụdị ọkụ RGB 4.4
The Speedlink TOKEN speakers feature six different RGB lighting modes, including a music-reactive mode. Use the dedicated lighting button on the wired remote to cycle through the modes or to turn the lighting off.
- Press the lighting button repeatedly to switch between the available RGB effects.
- One of the modes is a dynamic RGB effect that reacts to the music/sound being played.
- To deactivate the lighting, continue pressing the button until the lights turn off.
Note: The lighting settings may not be retained after the speakers are powered off or disconnected from power. You may need to re-select your preferred lighting mode upon restart.
5. Nlekọta
Mmezi kwesịrị ekwesị na-eme ka ndị ọkà okwu gị dị ogologo ma rụọ ọrụ nke ọma.
- Nhicha: Use a soft, dry cloth to wipe the speaker surfaces. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
- Uzuzu: Regularly remove dust from the speaker grilles using a soft brush or compressed air.
- Mkpughe mmiri mmiri: Avoid exposing the speakers to liquids. They are not waterproof.
- Nchekwa: Mgbe a naghị eji ya ogologo oge, chekwaa ndị ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
6. Nchọpụta nsogbu
If you encounter issues with your Speedlink TOKEN speakers, please refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ụda sitere na ndị ọkà okwu. |
|
|
| Bluetooth connection is unstable or drops out. |
|
|
| RGB lighting settings reset after power cycle. |
|
|
| Speakers are powered on but no RGB lighting. |
|
|
7. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | TOKEN RGB Gaming Speaker |
| Nọmba nlereanya | SL-810008-BK |
| Ụdị | Speedlink |
| Teknụzụ Njikọta | Auxiliary (3.5mm Jack), Bluetooth |
| Ụdị Ọkà Okwu | Multimedia |
| Ọnọdụ mmepụta ọdịyo | Stereo |
| Nhazi ọwa ụda gburugburu | 2.0 |
| Ike Mmepụta Ọkà Okwu Kachasị Elu | 12 Watt |
| Mgbochi | 4 ohm |
| Nzaghachi ugboro ugboro | 20000 kHz |
| Ụdị njikwa | Njikwa ime anya (Wired) |
| Atụmatụ pụrụ iche | Bluetooth, LED Light, RGB |
| Akụkụ ngwaahịa (L x W x H) | 8.5 x 8.1 x 16.2 cm (3.35 x 3.19 x 6.38 inch) |
| Ibu Ibu | 700 grams (1.54 lbs) |
| USB/Jack Cable Length | 1.2 mita (3.94 ụkwụ) |
| Cable Length Between Satellites | 1.2 meters (2x0.6m) (3.94 feet) |
| Isi Iyi Ike | USB-A |
| Ihe onwunwe | Plastic |
| Agba | Nwa |
8. Akwụkwọ ikike na nkwado
8.1 Akwụkwọ ikike nke onye nrụpụta
The Speedlink TOKEN RGB Gaming Stereo Speaker comes with a Akwụkwọ ikike onye nrụpụta afọ 2. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
The warranty does not cover damage caused by misuse, accident, unauthorized modification, or external causes such as power surges.
8.2 Nkwado ndị ahịa
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Speedlink website or contact their customer support. Refer to the product packaging or Speedlink's official websaịtị maka ozi kọntaktị kachasị ọhụrụ.
Websaịtị: www.speedlink.com
