Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

Okwu mmalite

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

Ihe ngwugwu

Biko lelee ngwungwu maka ihe ndị a:

• 1 x Baseus Car Jump Starter
• 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
• 1 x USB ka eriri chaja ụdị-C

Atụmatụ igodo

• Arụmọrụ dị elu: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
• Ọtụtụ ọrụ: Acts as both a car jump starter and a portable power bank.
• Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
• Ngosipụta agbakwunyere: Digital screen shows the remaining battery level of the jump starter.
• Nguzogide oke okpomọkụ: High-performance polymer battery cells ensure operation in very low and high temperatures.
• Nchekwa di elu: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
• Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
• Igwe ọkụ ọkụ arụnyere n'ime ya: Can be used as an emergency flashlight.
• Enwere ike ibugharị: Compact size and technical parameters allow it to be carried on an airplane.

Ozi nchekwa

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Ewepụla, gbanwee, ma ọ bụ rụkwaa ngwaọrụ ahụ.
• Ewepụla ngwaọrụ ahụ na mmiri ozuzo ma ọ bụ mmiri.
• Do not use the device if the battery clamps ma ọ bụ eriri mebiri emebi.
• Ensure proper polarity connection (red clamp na nti, nwa clamp to negative) to avoid short circuits.
• Debe ebe ụmụaka na-apụghị iru.
• Malitela batrị oyi kpọnwụrụ akpọnwụ.
• Ejikọtala ihe dị mma na nke na-adịghị mma clamps ọnụ.
• Jiri ngwaọrụ na mpaghara ikuku nke ọma.
• Remove the jump starter from the car battery immediately after starting the vehicle.
• Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ mgbe ọ naghị eji ya.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. Ozugbo chajịrị chaja zuru oke, kwụpụ eriri nchaji.

Operating Instructions: Car Jump Starting

Follow these steps carefully to jump start your vehicle:

1. Step 1: Connect the Smart Clamp USB

   Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

2. Step 2: Connect to Car Battery

   Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Vehicle

   Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

4. Nzọụkwụ 4: Kwụpụ

   Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Operating Instructions: Power Bank Function

The Baseus BS-CH001 can also be used to charge your electronic devices.

1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
2. Connect the other end of the cable to your electronic device.
3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
4. Once charging is complete, disconnect your device and the cable.

Nlekọta

• Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.
• For optimal battery life, fully charge the device at least once every 3-6 months.
• Debe ihe clamp cables clean and free from corrosion.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Baseus customer service through their official channels.

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.