1. Okwu mmalite
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Sunco 4ft LED Shop Light
2. Ozi nchekwa
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- ỊDỌ AKA NA NTỊ: Ihe ize ndụ nke mkpọ ọkụ eletrik. Disconnect power at the fuse or circuit breaker before installation or servicing.
- ỊDỌ AKA NA NTỊ: Ihe ize ndụ nke Ọkụ. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING: Risk of Injury. Yiri ugegbe nchekwa na uwe aka n'oge ntinye na ọrụ.
- Ezubere maka ihe ndozi a eji naanị ime ụlọ. Do not use in wet locations or where directly exposed to water.
- This fixture is na-adịghị dimmable. Do not connect to a dimmer switch.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Gbaa mbọ hụ na ọkọnọ voltage is compatible with the fixture (120V-277V).
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Ntọala na nwụnye
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Kwadebe Ebe Nkwanye: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Wụnye ngwaike Mounting: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Jikọọ waya: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Ndozi echedoro: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Image 4.1: Installation Steps
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage nke ihe eji ejikọta anaghị agafe ikike sekit ahụ.
Image 4.2: Daisy Chain Connection Point
5. Ntuziaka ọrụ
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.
Image 5.1: Selectable CCT Options
6. Nlekọta
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Nhicha: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- Ọkụ: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7. Nchọpụta nsogbu
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo | Enweghị ọkụ Wiwi na-ezighi ezi CCT switch not set | Lelee ihe mgbawa sekit na mgba ọkụ mgbidi. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| Ìhè flickers | Ọkụ ọkụ anaghị akwụsi ike Njikọ waya na-adịghị mma | Gbaa mbọ hụ na ọkọnọ ike kwụsiri ike yana n'ime voltage oke. Check all wire connections for tightness. |
| Ìhè adịghị enwu dị ka a tụrụ anya ya | Ntọala CCT ezighi ezi Uzuzu ma ọ bụ irighiri ihe na oghere | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Nkọwapụta
| Ụdị | Ọkụ Sunco |
| Nọmba nlereanya | WR_PR8-WH-4060K-2PK |
| Akụkụ ngwaahịa | 48"L x 8.58"W x 2.56"H |
| Wattage | 60W |
| Icha ọkụ | 7200 Lumen |
| Ịrụ ọrụ | 118 LM/W |
| Okpomọkụ agba (CCT) | Selectable 4000K, 5000K, 6000K |
| Voltage | 120V-277V |
| Enwere ike ibelata | Mba |
| Ojiji ime ime/n'èzí | Naanị ime ụlọ |
| Ụdị nwụnye | Oke ugwu |
| Njirimara Pụrụ Iche | Njikọ |
| Ụdị isi iyi ọkụ | Ikanam |
| Ihe onwunwe | Alloy Steel, Polycarbonate |
| Nkezi Ndụ | Awa 50,000 |
| Asambodo | ETL, FCC, RoHS |
| Ọnụọgụ nke ihe | Iri (Ngwugwu) |
9. Akwụkwọ ikike na nkwado
Sunco Lighting stands behind the quality of its products.
- Akwụkwọ ikike: Ngwaahịa a na-akwado site na Akwụkwọ ikike nke afọ 3 site na ụbọchị ịzụrụ. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
- Nkwado ndị ahịa: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.
