1. Ozi nchekwa
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.
- Ịdọ aka ná ntị: Ihe ize ndụ nke ujo eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu echichi ma ọ bụ ọrụ.
- This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications. If you are not familiar with these codes, a qualified electrician should perform the installation.
- Do not install this fixture on surfaces that are easily flammable.
- Gbaa mbọ hụ na njikọ niile echekwara na mkpuchi nke ọma.
- Elela anya ozugbo na isi iyi ọkụ ikanam.
2. Ihe ngwugwu
Nyochaa na akụrụngwa niile dị tupu ịmalite nrụnye.
- LED Flood Light Fixture (1)
- Ngwa ngwa mgbago (1)
- Akwụkwọ ntuziaka (1)
3. Nkọwapụta
| Nkọwapụta | Uru |
|---|---|
| Nọmba nlereanya | 17000207 |
| Isi Iyi Ike | Hardwired |
| Wattage | 32 Watt |
| Icha ọkụ | 3200 Lumen |
| Okpomọkụ agba | 4000 Kelvin (Ìhè na-acha ọcha) |
| Mpaghara nchọpụta ngagharị | 240 degrees, up to 50 ft (15 m) |
| Ihe onwunwe | Plastic |
| Ojiji ime ime/n'èzí | N'èzí |
| Ọkwa Nguzogide mmiri | Mmiri na-eguzogide |
| Akụkụ (L x W x H) | 7" x 12" x 8.4" |
| Akwụkwọ ikike | Akwụkwọ ikike nke onye nrụpụta afọ abụọ nwere oke |
Image: Product dimensions for planning installation space.
4. Ntọala na nwụnye
This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.
4.1 Nhọrọ nrịgo
The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.
Image: Wall mount and eave mount installation options.
4.2 Nzọụkwụ nwụnye
- Gbanyụọ Ike: Tupu ịmalite, hụ na agbanyụrụ ọkụ eletrik na ebe nrụnye ahụ na ihe mgbawa sekit ma ọ bụ igbe fuse.
- Install Mounting Bar: Secure the mounting bar onto the junction box.
- Wụnye efere nkwụnye: Attach the mounting plate to the mounting bar.
- Njikọ waya: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
- Tinye ihe ndozi: Secure the flood light fixture to the mounting plate using the center bolt.
- Akara: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
- Weghachi ike: Once installation is complete and secure, restore power to the circuit.
Image: Step-by-step installation guide.
5. Ntuziaka ọrụ
The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.
5.1 Motion Activation
The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.
Image: Motion detection zone illustration.
5.2 MotionBright™ 2-Level Lighting
This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.
Image: MotionBright feature demonstrating low and full brightness modes.
5.3 nhazi nhazi
The motion sensor unit has adjustable dials to customize the light's behavior:
- N'oge: Adjusts how long the light stays on after motion is detected (1, 5, or 20 minutes, or Test mode).
- Sens (Sensitivity): Controls the range and sensitivity of the motion sensor (Low, Med, High).
- Icha ọkụ: Adjusts the overall brightness of the light (Low, High).
- MotionBright: Selects the operating mode (OFF, Dusk to Dawn, Hour).
Image: Control dials for adjusting light settings.
5.4 Adjusting Lamp Isi
Igwe ọkụ atọ lamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.
Image: Adjustable lamp heads for directing light.
6. Nlekọta
This LED flood light is designed for minimal maintenance.
- Nhicha: Iji hichaa ihe ndozi ahụ, hụ na agbanyụrụ ọkụ. Jiri nwayọ hichaa, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
- Ọkụ: The integrated LED lights are not user-replaceable. Do not attempt to open the lamp isi.
- Ihe mmetụta: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
7. Nchọpụta nsogbu
If you experience issues with your flood light, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | No power, faulty wiring, sensor blocked, incorrect settings. | Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings. |
| Ìhè na-anọgide na-enwu. | Continuous motion detected, 'On Time' set too long, 'MotionBright' setting. | Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn'). |
| Motion not detected reliably. | Sensor blocked, sensitivity too low, incorrect angle. | Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage. |
| Ìhè flickers. | Loose wiring connection, power fluctuations. | Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected. |
8. Akwụkwọ ikike na nkwado
This Globe Electric product is backed by a Akwụkwọ ikike nke onye nrụpụta afọ abụọ nwere oke site na ụbọchị ịzụrụ. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị.
For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.
Maka ozi ndị ọzọ, gaa na Ụlọ Ahịa Eletriki Globe na Amazon.
