Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your BOBRICK 2013 Stainless Steel Automatic Wall-Mounted Foam Soap Dispenser. Designed for durability and hygiene, this touch-free dispenser offers a reliable solution for various commercial and public restroom environments. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Njirimara ngwaahịa
- Ihe owuwu na-adịgide adịgide: Manufactured from high-quality stainless steel with a satin finish, designed for long-lasting performance and resistance to wear.
- Arụmọrụ anaghị emetụ aka: Features a sensor-activated mechanism for automatic, hygienic soap dispensing, minimizing contact and promoting cleanliness.
- Versatile Soap Compatibility: Equipped with a corrosion-resistant valve capable of dispensing a variety of bulk-fill foam soaps, iodine-based soaps, and alcohol-based liquid or gel hand sanitizers.
- Nnukwu ike: Holds up to 800 ml (27 fl. oz.) of soap, reducing the frequency of refills.
- Ọnụ ego: Designed to use commonly available bulk foam soap, eliminating the need for expensive proprietary cartridges and offering significant cost savings.
- Nhazi echedoro: Includes a tumbler lock to prevent tampering and unauthorized access to the soap reservoir.
- Ngosipụta njupụta: A visible window allows for easy monitoring of soap levels.
- Ihe ngosi batrị dị ala: A flashing blue light signals when batteries are low and require replacement.
Nwụnye
The BOBRICK 2013 dispenser is designed for wall-mounted installation. Ensure the mounting surface is sturdy and capable of supporting the dispenser's weight when full. Proper installation is crucial for optimal performance and security.
- Họrọ ebe: Choose a suitable wall location, ensuring adequate clearance above and below the dispenser for refilling and hand access.
- Kaa akara ebe mgbago: Use the provided mounting template (if applicable) or measure and mark the drill points for the mounting screws.
- Oghere egwu egwu: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., masonry bit for tile/concrete, wood bit for studs).
- Secure Dispenser: Attach the dispenser to the wall using the appropriate screws and anchors. Ensure it is level and securely fastened.
- Nwụnye batrị: Open the dispenser using the provided key. Install 4 x 1.5V Alkaline “AA” cell batteries into the designated compartment.
- Initial Fill: Fill the soap reservoir with suitable foam soap. Close and lock the dispenser.
Figure 1: Technical specifications and dimensions for installation.
Ọrụ
The BOBRICK 2013 dispenser operates automatically via an infrared sensor. To dispense soap:
- Position Hands: Place your hands flat beneath the dispenser's sensor area.
- Nkesa akpaaka: The sensor will detect your hands and automatically dispense a measured amount of foam soap.
- Ìhè ihe ngosi: A blue indicator light will illuminate during dispensing, signaling that the unit is in use.
Figure 2: Blue indicator light signals when the dispenser is in use.
Video 1: Demonstrates the automatic dispensing function of the Bobrick Wall-Mounted Foam Soap Dispenser.
Maintenance & Refilling
Mmezi mgbe niile na-eme ka arụmọrụ na ịdị ọcha kacha mma.
- Checking Soap Level: Monitor the soap level through the refill indicator window on the front of the dispenser.
- Refilling Soap:
- Unlock the dispenser using the provided key at the top. The front cover will hinge open.
- Carefully remove the empty soap reservoir.
- Fill the reservoir with bulk foam soap. Do not overfill.
- Reinsert the filled reservoir and close the front cover, ensuring it locks securely.
- Ngbanwe batrị: A flashing blue light indicates low battery. Unlock the dispenser, replace the 4 x 1.5V Alkaline “AA” cell batteries, and close the cover.
- Nhicha: Wipe the exterior of the stainless steel dispenser with a soft, damp ákwà na ihe nhicha dị nro, nke na-anaghị afụ ụfụ. Zere kemịkalụ siri ike ma ọ bụ ihe ndị na-emebi ihe nke nwere ike imebi njedebe.
Figure 3: Dispenser with hinged housing open for easy refilling.
Figure 4: Important information regarding battery type and low battery indicator.
Video 2: Demonstrates the refilling process for the Bobrick soap dispenser.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ihe nkesa anaghị arụ ọrụ | Low or dead batteries; Sensor obstructed; No soap in reservoir. | Replace batteries; Clear sensor area; Refill soap reservoir. |
| Soap not dispensing or dispensing inconsistently | Soap reservoir empty; Dispensing mechanism clogged; Incorrect soap type (not foam). | Refill soap; Clean dispensing nozzle; Ensure foam soap is used. |
| Ìhè na-acha anụnụ anụnụ na-egbuke egbuke | Ngosipụta batrị dị ala. | Replace all 4 x AA batteries. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | B-2013 |
| Ihe onwunwe | Igwe anaghị agba nchara |
| Mechaa | Satin rụchaa |
| Akụkụ ngwaahịa (L x W x H) | 5" x 4.72" x 11" (approx. 127mm x 120mm x 279mm) |
| Ikike Olu Liquid | 800 Milliliters (27 fl. oz.) |
| Isi Iyi Ike | 4 x 1.5V Alkaline “AA” Cell Batteries |
| Dispensing Type | Automatic Foam |
| Ụdị nkwụnye | Agbakwasịrị mgbidi |
Ozi nchekwa
- Do not submerge the dispenser in water or expose it to excessive moisture.
- Use only the specified battery type (4 x AA Alkaline). Do not mix old and new batteries or different battery types.
- Keep the dispenser out of reach of small children to prevent misuse or injury.
- Ensure the dispenser is securely mounted to prevent it from falling.
- Use only foam soap or compatible sanitizers as specified. Using incorrect liquids may damage the dispensing mechanism.
Akwụkwọ ikike na nkwado
Specific warranty details and customer support contact information are typically provided with your purchase documentation. Please refer to the packaging or contact Bobrick customer service for assistance.
