Ngwaahịa gafereview
Nke Webasto Air Top 2000 STC is a genuine air heater kit designed for various applications, including cabins, bunks, sleepers, or cargo areas. This 12VDC diesel heater offers an output range of 3070 BTU to 7000 BTU (0.9 kW to 2 kW), providing efficient heating. It is capable of operating for up to 22 hours on just 1 gallon of diesel fuel. Widely used in commercial truck applications, it is certified as an idle reduction device, contributing to fuel savings, reduced maintenance, cost efficiency, and lower pollution.
Image: Complete kit contents for the Webasto Air Top 2000 STC Diesel Heater, including the heater unit, wiring, fuel lines, exhaust, and air ducts.
Kedu ihe dị na Igbe ahụ
Nke Webasto Air Top 2000 STC kit includes all necessary components for installation and operation:
- Igwe ihe ọkụkụ
- Smartemp Programmable Controller
- Mgbapụta mmanụ ụgbọala
- Akara akara
- Heater Wire Harness
- Fuel Pump Wire Harness
- Ahịrị mmanụ
- Fuel Tank Standpipe
- Flexible Stainless Steel Exhaust Tubing
- Combustion Air Tubing
- Flexible Cabin Air Ducting
- Air Louvers
- Akwụkwọ ntuziaka ọrụ/nwụnye
Ntọala na nwụnye
Proper installation is crucial for the safe and efficient operation of your Webasto Air Top 2000 STC heater. It is recommended that installation be performed by a qualified technician. Refer to the included Operation/Installation Manual for detailed, step-by-step instructions specific to your vehicle or application.
Atụmatụ nwụnye isi:
- Mounting the Heater Unit: Securely mount the heater unit using the provided base seal to ensure proper sealing and vibration dampna -abata.
- Njikọ Sistemụ Mmanụ Ọkụ: Install the fuel pump and connect the fuel line to the fuel tank standpipe. Ensure all fuel connections are tight and leak-free. Optional fuel tank tap kits (e.g., F0rd Transit Diesel Fuel Tank Tap Kit 10-7-0009, Promaster - Sprinter Fuel Tank Tap Kit 10-7-0010) may be required depending on your vehicle.
- Njikọ eletrik: Connect the heater wire harness and fuel pump wire harness to the vehicle's 12VDC power supply, ensuring correct polarity and fusing as specified in the manual.
- Exhaust and Combustion Air: Install the flexible stainless steel exhaust tubing and combustion air tubing. Ensure exhaust gases are safely routed away from the vehicle's interior and air intake.
- Air Ducting: Connect the flexible cabin air ducting and air louvers to distribute heated air effectively within the desired space. Ensure ducting is free from kinks or obstructions.
- Nwụnye njikwa: Mount and connect the Smartemp 3.0 Bluetooth Controller in an accessible location for easy operation and programming.
Ntuziaka ọrụ
Nke Webasto Air Top 2000 STC heater is controlled by the Smartemp 3.0 Bluetooth Controller, allowing for precise temperature management and operational settings.
Nrụ ọrụ bụ isi:
- Ike Na: Ensure the heater has a stable 12VDC power supply and sufficient diesel fuel.
- Ihe njikwa njikwa: Use the Smartemp 3.0 Bluetooth Controller to turn the heater on/off and adjust settings.
- Ntọala okpomọkụ: Set your desired temperature using the controller. The heater will automatically adjust its heat output (between 3070 BTU and 7000 BTU) to maintain the set temperature.
- Ụdị ikuku ikuku: The heater may also offer a ventilation-only mode for air circulation without heat. Consult your controller's specific instructions for this feature.
- Mechie: To turn off the heater, use the controller. Allow the heater to complete its cool-down cycle before disconnecting power to prevent damage.
For advanced features, programming schedules, and Bluetooth connectivity, refer to the Smartemp 3.0 Bluetooth Controller user manual.
Nlekọta
Mmezi oge niile na-eme ka ndụ gị dị ogologo ma nwee ike ịrụ ọrụ nke ọma Webasto Air Top 2000 STC heater. Always disconnect power before performing any maintenance.
- Nchacha izugbe: Keep the exterior of the heater unit clean and free from dust and debris. Ensure air intake and exhaust openings are unobstructed.
- Nyochaa Sistemu mmanụ: Periodically inspect fuel lines and connections for any signs of leaks or damage. Ensure the fuel filter (if applicable) is clean.
- Air Ducting Inspection: Check air ducts and louvers for blockages or damage. Ensure proper airflow for efficient heating.
- Njikọ eletrik: Hụ na njikọ eletriki niile dị nchebe ma ghara imebi emebi.
- Ọrụ ndị ọkachamara: It is recommended to have the heater professionally serviced annually or as specified in the detailed manual, especially before the heating season, to check combustion components and overall system health.
Nchọpụta nsogbu
This section provides basic troubleshooting steps for common issues. For more complex problems or error codes displayed on the Smartemp controller, consult the comprehensive Operation/Installation Manual or contact Webasto support.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ọkụ anaghị amalite | No power supply; Low battery voltage; No fuel; Blown fuse; Controller error. | Check 12VDC power connection and battery charge. Ensure fuel tank has diesel. Check and replace fuses. Reset controller or check for error codes. |
| Igwe ọkụ na-amalite mana ọ na-emechi ngwa ngwa | Fuel supply issue; Exhaust/intake blockage; Overheating. | Check fuel lines for air or blockages. Ensure exhaust and combustion air tubes are clear. Allow heater to cool down; check for proper ventilation. |
| Mmepụta okpomọkụ ezughị oke | Incorrect temperature setting; Air ducting obstruction; Low fuel quality. | Verify temperature setting on controller. Check cabin air ducting for kinks or blockages. Use high-quality diesel fuel. |
Nkọwapụta
| Ụdị | Webitu |
| Nlereanya | Airtop 2000 |
| Nọmba Nlereanya ihe | 5013913A |
| Typedị okpomọkụ | Air for Cabin, Bunk, Sleeper or Cargo |
| Nrụ ọrụ Voltage | 12 VDC |
| Ụdị mmanụ ụgbọala | Diesel |
| Oke mmepụta ọkụ | 3070 BTU - 7000 BTU (0.9 kW - 2 kW) |
| Heat Output Control | Programmable Smartemp 3.0 Bluetooth Controller |
| Njikọ njikọ | 60mm |
| Ibu Ibu | 35 pound |
Akwụkwọ ikike na nkwado
Nke Webasto Air Top 2000 STC heater comes with full Webasto backed warranty support for all products purchased from authorized distributors in the USA. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Webitu websaịtị.
If you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact your authorized Webasto dealer or the Webasto customer support line. Ensure you have your product model number (5013913A) and purchase details available when contacting support.
