1. Okwu mmalite
This manual provides instructions for the installation, operation, and maintenance of the TRENDnet TEG-S591 9-Port Multi-Gig Switch. This unmanaged switch is designed to expand network bandwidth and reduce traffic bottlenecks, offering high-speed connectivity for various network environments.
Akụkụ ndị bụ isi:
- 8 x 2.5G RJ-45 Ports (1Gbps/2.5Gbps)
- 1 x 10G RJ-45 Port (1Gbps/2.5Gbps/10Gbps)
- 60Gbps Switching Capacity
- Fanless Design for Silent Operation
- Wall-Mountable Metal Housing
- NDAA & TAA Compliant
2. Ihe ngwugwu
Chọpụta na ngwungwu gị nwere ihe ndị a:
- TRENDnet TEG-S591 9-Port Multi-Gig Mgbanwe
- Ntuziaka nwụnye ngwa ngwa
- Ihe nkwụnye ọkụ (12V, 1A)
If any items are missing or damaged, please contact your reseller or TRENDnet customer support.
3. Akụrụngwa Kwụsịrịview
Onyonyo 3.1: Nhazi Ogwe ihu
Zuru ezu n'ihu view of the TEG-S591 switch, highlighting the eight 2.5G RJ-45 ports (1-8), one 10G RJ-45 port (9), and the corresponding LED indicators for power, link, and activity.
Onyonyo 3.2: Nhazi Ogwe azụ
N'azụ view of the TEG-S591 switch, displaying the DC power input port and ventilation slots.
The TEG-S591 features a durable metal housing with ventilation for heat dissipation. The front panel includes LED indicators for power and port status, while the rear panel houses the DC power input.
Ihe ngosi LED:
- PWR: Indicates power status. On when the device is powered.
- Ports 1-8 (2.5G LINK/ACT): Indicates link status and activity for 2.5G ports.
- Port 9 (10G LINK/ACT): Indicates link status and activity for the 10G port.
4. Nhazi
The TRENDnet TEG-S591 is an unmanaged switch, designed for plug-and-play operation. No software configuration is required.
- Njikọ ike: Connect the included power adapter to the DC IN port on the rear of the switch and then plug the adapter into a standard electrical outlet. The PWR LED on the front panel will illuminate.
- Njikọ ngwaọrụ netwọk: Connect your network devices (e.g., computers, servers, network-attached storage, routers, access points) to any of the RJ-45 ports (1-9) using standard Ethernet cables (Cat5e or better for 2.5G, Cat6a or better for 10G).
- Nyochaa njikọ: Once a device is connected, the corresponding LINK/ACT LED for that port will illuminate, indicating an active network link. The LED will blink to show data activity.
Figure 4.1: Typical Network Deployment
An illustrative diagram demonstrating how the TEG-S591 Multi-Gig Switch integrates into a home network, connecting various devices like WiFi 6 routers, access points, and adapters to enhance network speed.
5. .rụ ọrụ
The TEG-S591 operates automatically once connected. It functions as a store-and-forward device, ensuring reliable data transmission. The switch supports auto-negotiation for speed and duplex mode, and auto-MDI/MDIX, eliminating the need for crossover cables.
The fanless design ensures silent operation, making it suitable for quiet environments such as home offices or living rooms.
6. Nlekọta
To ensure optimal performance and longevity of your TRENDnet TEG-S591 switch, follow these maintenance guidelines:
- Ọnọdụ gburugburu: Operate the switch within the specified temperature and humidity ranges. Avoid placing it in direct sunlight or near heat sources.
- Nhicha: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
- Igwe ikuku: Ensure that the ventilation slots are not blocked to allow for proper airflow and heat dissipation.
- Njikwa USB: Organize network cables to prevent strain on the ports and to maintain a tidy setup.
7. Nchọpụta nsogbu
If you encounter issues with your TEG-S591 switch, refer to the following common troubleshooting steps:
- Enweghị ike: Ensure the power adapter is securely connected to both the switch and a working electrical outlet. Check if the PWR LED is illuminated.
- Enweghị ọkụ njikọ: Verify that the Ethernet cable is securely connected to both the switch port and the connected device. Try a different Ethernet cable or port. Ensure the connected device is powered on and functioning correctly.
- Ọsọ netwọk dị nwayọ: Confirm that your connected devices and cables support the desired multi-gigabit speeds (2.5G or 10G). Ensure you are using Cat5e or better cabling for 2.5G, and Cat6a or better for 10G connections. Check for network congestion or issues with the connected devices.
- Njikọta na-adịte aka: Check all cable connections for looseness or damage. Ensure the switch is placed in a well-ventilated area to prevent overheating.
For further assistance, consult the TRENDnet support resources or contact technical support.
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | TEG-S591 |
| Ọnụọgụ nke ọdụ ụgbọ mmiri | 9 (8 x 2.5G RJ-45, 1 x 10G RJ-45) |
| Ọnụego mbufe data | 60 Gigabits kwa nkeji (Ike mgbanwe) |
| Ụdị interface | RJ45 |
| Ụkpụrụ | IEEE 802.3bz (2.5G); IEEE 802.3an (10G); IEEE 802.3ab; IEEE 802.3x |
| Akụkụ ngwaahịa | 9.45"L x 4.1"W x 1"H |
| Ibu Ibu | 1.6 pound |
| Voltage | 12 volts |
| Ihe gbasara ikpe | Ọla |
| Okpomọkụ na-arụ ọrụ | Up to 104 Degrees Fahrenheit (40 Degrees Celsius) |
| Agba | Nwa |
9. Akwụkwọ ikike Ozi
The TRENDnet TEG-S591 9-Port Multi-Gig Switch is backed by TRENDnet’s Lifetime Manufacturer Protection. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official TRENDnet websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa.
10. Nkwado nka na ụzụ
TRENDnet provides reliable technical support for its products. Our team of English-speaking advisors and technical experts are available during normal business hours to assist with any inquiries or issues you may have.
For support, please visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide included with your product.
