Avenli 4-Person Inflatable Square Spa - Carbon Grey User Manual

Okwu mmalite

Thank you for choosing the Avenli 4-Person Inflatable Square Spa. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new inflatable spa. Please read this manual thoroughly before installation and use, and keep it for future reference.

Image: The Avenli 4-Person Inflatable Square Spa in Carbon Grey, showcasing its square shape and external pump unit.

Ozi nchekwa dị mkpa

Always follow basic safety precautions when installing and using this electrical appliance. Failure to follow these instructions could result in injury or death.

• Do not permit children to use this spa unless they are supervised at all times.
• Ensure the spa is placed on a flat, even surface capable of supporting the weight of the spa when fully filled (approximately 1,200 pounds) and its occupants.
• Do not operate the spa if the temperature is below 39 degrees Fahrenheit (4 degrees Celsius).
• Always use a Ground Fault Circuit Interrupter (GFCI) for electrical connection.
• Do not use extension cords. Connect the spa directly to a grounded outlet.
• Maximum water temperature is 104°F (40°C). Consult a doctor before use if pregnant, diabetic, or in poor health.
• Do not consume alcohol or drugs before or during spa use.
• Regularly clean and maintain the spa water to prevent bacterial growth.

Ihe ngwugwu

Nyochaa na etinyere akụrụngwa niile edepụtara n'okpuru na ngwugwu gị:

Image: A visual representation of all items included with the Avenli Inflatable Spa, such as the spa liner, pump unit, cover, ground cloth, and various accessories.

• Ihe mkpuchi Spa a na-afụ ọkụ
• Pump Unit with Control Panel
• All-Weather Resistant Top Cover with Secure Locking Clips
• Uwe ala
• GFCI nkwụnye
• Ikuku Valve
• Inflating Hose
• Pump Unit Connectors (3)
• Okpu
• Ngwa ndozi
• Katrij nzacha
• Filtration Cartridge Support

Ntuziaka nhazi

Setting up your Avenli Inflatable Spa is a straightforward process, typically taking less than 10 minutes for initial inflation.

1. Nhọrọ saịtị

Choose a flat, level area free of debris. The surface must be able to support the total weight of the spa when filled with water and occupants (approximately 1,200 pounds).

Image: The inflatable spa positioned on a sturdy outdoor deck, illustrating a suitable installation location.

2. Laying the Ground Cloth

Unfold the ground cloth and place it on your selected site. This provides an extra layer of protection for the spa liner.

3. Ọnụ ego ọnụ ahịa

1. Unpack the spa liner and place it on the ground cloth.
2. Connect the inflating hose to the pump unit and the spa's inflation valve.
3. Plug in the pump unit (ensure GFCI is functional).
4. Turn on the inflation function on the pump unit. The spa will inflate rapidly.
5. Once fully inflated, disconnect the hose and secure the valve cap.

Image: The inflatable spa body connected to its external pump unit, illustrating the setup for inflation and water circulation.

4. Na-ejuputa mmiri

Fill the spa with a garden hose to the recommended water level indicated on the inside of the spa liner. Do not overfill.

5. Attaching the Pump Unit

Connect the pump unit to the spa liner using the provided connectors. Ensure all connections are tight to prevent leaks.

Ntuziaka ọrụ

The Avenli spa features an intuitive LED control panel for easy operation.

Foto: nkọwa zuru ezu view of the spa's LED control panel, highlighting buttons for various functions such as heating, massage, filtration, and temperature adjustment.

Ọrụ Panel Control:

• Ikanam Display: Shows current water temperature and settings.
• Bọtịnụ ọkụ: Activates the heating system. The heater will maintain the set temperature.
• Bọtịnụ ịhịa aka n'ahụ: Activates the air jet massage system (90 air jets).
• Filtration Button: Controls the water filtration system.
• Bọtịnụ mkpọchi: Locks/unlocks the control panel to prevent accidental changes.
• Bọtịnụ Mmụba/Mbelata okpomọkụ: Adjusts the desired water temperature. Maximum temperature is 104°F (40°C).
• Temperature Units Selector: Toggles between Celsius (°C) and Fahrenheit (°F).

Mkpo ọkụ nke mbụ:

After filling the spa, press the Heat Button. The spa will begin heating the water to your desired temperature, up to 104°F (40°C). Heating time will vary based on ambient temperature and initial water temperature.

Nlekọta

Regular maintenance is crucial for the longevity and hygiene of your inflatable spa.

Ogo mmiri

• Test water regularly using spa test strips.
• Maintain proper pH levels (7.4-7.6) and sanitizer levels (e.g., chlorine or bromine).
• Change spa water every 1-3 months depending on usage.

Katrij nzacha

• Clean the filter cartridge weekly by rinsing it with a garden hose.
• Replace the filter cartridge every 2-4 weeks, or more frequently with heavy use.

Na-ehicha Spa

• Drain the spa completely using the convenient bottom drain.
• Wipe down the interior and exterior surfaces with a soft cloth and mild, non-abrasive cleaner.
• Rinse thoroughly and allow to dry before refilling or storing.

Nchekwa

When not in use for extended periods, or for portability:

1. Drain all water from the spa.
2. Deflate the spa completely.
3. Ensure the spa is thoroughly dry to prevent mold and mildew.
4. Fold neatly and store in a dry, protected area, away from extreme temperatures.

Image: The inflatable spa with its weather-resistant cover securely fastened, demonstrating how to protect the spa when not in use.

Nchọpụta nsogbu

Rụtụ aka na ngalaba a maka okwu nkịtị na azịza ha.

Nkọwapụta

Image: A technical diagram illustrating the precise dimensions of the Avenli Inflatable Spa, including outer and inner wall measurements and overall height.

Akwụkwọ ikike na nkwado

For warranty information, technical support, or to purchase replacement parts, please contact Avenli customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Onye na-ere ahịa: Four Seasons Pool Supply

Iwu nloghachi: Amụma nkwụghachi/nnọchi ụbọchị iri atọ site na ụbọchị ịzụrụ ihe.