Rfiver Tripod TV Stand Instruction Manual

Ngwaahịa gafereview

The Rfiver Tripod TV Stand is designed to securely hold 37-80 inch LED, LCD, and OLED flat or curved screen televisions. This portable and height-adjustable stand offers flexibility for various viewing environments, supporting TVs up to 110 lbs.

Atụmatụ gụnyere:

• High-strength alloy steel construction for stability.
• Adjustable height from 51 inches to 75 inches.
• Tilt adjustment up to 15 degrees (up and down).
• Foldable design for easy transport and storage.
• Compatible with VESA mounting patterns from 100x100mm to 600x400mm.
• Integrated safety features including a safety pin and safety locks.

Ozi nchekwa

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• Ike ibu: Agafela ikike ịdị arọ kacha nke 110 lbs (50 n'arọ). Emebere ntọala a maka TV n'etiti 37 na 80 inch.
• Nkwụsi ike: Ensure the tripod legs are fully extended and locked in place on a flat, stable surface. The triangular design provides stability, but always verify the stand is secure before mounting a TV.
• Pin nchekwa: Always use the provided safety pin to secure the height adjustment mechanism after setting the desired height.
• Ịkwanye TV: Ensure your TV's VESA pattern is compatible with the stand (100x100mm to 600x400mm). Use the correct screws and spacers as per your TV's manual.
• Ụmụaka na anụ ụlọ: Keep children and pets away from the TV stand during assembly and operation. Do not allow them to climb on or play with the stand or mounted TV.
• Ntughari: When moving the stand with a TV mounted, exercise extreme caution. It is recommended to remove the TV before relocating the stand for maximum safety.

Ihe ngwugwu

Nyochaa na akụrụngwa niile dị tupu ịmalite mgbakọ. Ọ bụrụ na akụkụ ọ bụla na-efu ma ọ bụ mebie, kpọtụrụ nkwado ndị ahịa.

(Note: Specific part list not provided in JSON, general statement used.)

Ntọala na Mgbakọ

Follow these steps for proper assembly of your Rfiver Tripod TV Stand. It is recommended to have a second person assist with mounting the TV.

Step 1: Assemble the Tripod Base

Carefully unpack all components. Extend the tripod legs until they are fully spread and stable. Ensure the base is on a level surface.

Image: The tripod base with white lines indicating the safe height range for leg extension. Ensure legs are spread within this range for stability.

Step 2: Attach the TV Mounting Plate to the Pole

Secure the TV mounting plate to the central pole of the tripod. Use the provided hardware and ensure all connections are tight.

Image: Diagram illustrating the height adjustment mechanism, including the safety lock, height adjustment knob, and security pin. This shows how the mounting plate attaches to the pole.

Step 3: Adjust Height and Secure with Safety Pin

Adjust the central pole to your desired height (between 51" and 75"). Once the height is set, insert the safety pin through the designated hole and tighten the height adjustment knob. This prevents accidental slippage.

Foto: nso nso view of the safety features, including the white line indicator for the safe height range and the safety lock mechanism to prevent the TV from falling.

Step 4: Attach TV Brackets to Your Television

Attach the provided TV brackets to the back of your television using the appropriate screws and spacers for your TV model. Refer to your TV's manual for correct VESA mounting screw sizes.

Step 5: Mount the TV onto the Stand

With assistance, carefully lift your television and hook the attached TV brackets onto the mounting plate on the stand. Ensure the TV is centered and securely seated. Engage any safety locks on the brackets to prevent the TV from sliding off.

Image: The Rfiver Tripod TV Stand with a television mounted, highlighting its robust design and stability.

Ntuziaka ọrụ

Ndozi elu

To adjust the height of the TV, first remove the safety pin and loosen the height adjustment knob. Carefully raise or lower the central pole to the desired position. Re-insert the safety pin and tighten the knob securely before releasing the pole.

Ndozi atụgharị

The TV mounting plate allows for a tilt adjustment of up to 15 degrees up or down. Loosen the tilt adjustment knobs on the side of the mounting plate, adjust the TV to the desired angle, and then securely tighten the knobs.

Image: A television mounted on the stand, illustrating the +/- 15 degree tilt adjustment capability for optimal viewakụkụ .

Mbugharị na Nchekwa

The stand features a foldable design for easy transport and storage. To fold, first remove the TV. Then, loosen the necessary knobs and collapse the central pole and tripod legs. This allows for compact storage and transport, such as in a car trunk.

Image: The Rfiver Tripod TV Stand in its folded state, demonstrating its compact size for easy transport and storage in a vehicle.

Image: A diagram showing the process of folding the TV stand for compact storage, emphasizing its portability.

Nlekọta

Regular maintenance ensures the longevity and safe operation of your TV stand.

• Nhicha: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Nyochaa ngwaike: Periodically check all screws, bolts, and knobs to ensure they are tight and secure. Re-tighten if necessary.
• Nyocha: Inspect the tripod legs and central pole for any signs of damage, bending, or wear. Do not use the stand if any components are compromised.

Nchọpụta nsogbu

If you encounter issues with your Rfiver Tripod TV Stand, refer to the following common solutions:

• Nkwụsi ahụ adịghị ike:
  • Ensure the tripod legs are fully extended and locked on a flat, level surface.
  • Verify that the TV weight does not exceed 110 lbs and is within the 37-80 inch size range.
  • Check all connection points and tighten any loose screws or knobs.
• TV is Not Level:
  • Adjust the tilt mechanism to level the TV.
  • Ensure the TV mounting brackets are evenly attached to the TV and the stand.
• Ihe isi ike imezi elu:
  • Loosen the height adjustment knob completely and ensure the safety pin is fully removed before attempting to adjust.
  • Do not force the pole; ensure no obstructions are present.

For further assistance, please contact Rfiver customer support.

Nkọwapụta

Akwụkwọ ikike na nkwado

All Rfiver products are backed by a 5-year manufacturer's warranty, ensuring quality and customer satisfaction. For warranty claims, technical support, or missing parts, please contact Rfiver customer service.

Please visit the official Rfiver websaịtị ma ọ bụ gaa na akwụkwọ ịzụrụ ihe gị maka nkọwa kọntaktị kpọmkwem.