Rojeco 2L Automatic Pet Feeder (Model RWSQ-02) User Manual

1. Okwu mmalite

Thank you for choosing the Rojeco 2L Automatic Pet Feeder, Model RWSQ-02. This device is designed to provide consistent and timely meals for your pet, ensuring they maintain a healthy eating schedule. Please read this manual thoroughly before using the feeder to ensure proper operation and to maximize its lifespan.

Ozi nchekwa

• Ngwa a bụ naanị maka ime ụlọ.
• Ejila akụkụ bụ isi na mmiri ma ọ bụ mmiri mmiri ndị ọzọ.
• Keep out of reach of children and pets when not in use or during cleaning.
• Use only the original power adapter provided with the feeder.
• Gbaa mbọ hụ na etinyere onye na-enye nri n'elu ebe kwụsiri ike, dịkwa larịị.
• Only use dry pet food with a diameter suitable for the dispenser mechanism.

2. Ngwaahịa gafereview

The Rojeco RWSQ-02 Automatic Pet Feeder consists of several key components designed for easy assembly and use.

Foto 2.1: N'ihu view of the Rojeco 2L Automatic Pet Feeder.

Foto 2.2: Akụkụ view of the Rojeco 2L Automatic Pet Feeder.

Ngwa:

• Tankị nri: Transparent container for storing dry pet food.
• Isi ngalaba: Houses the dispensing mechanism, control panel, and power input.
• Food Bowl: Stainless steel bowl for pet food.
• Ihe mkpuchi: Secures the food tank and keeps food fresh.
• Ihe nkwụnye ọkụ: For connecting the feeder to an electrical outlet.

3. Nhazi

3.1 Mwepu na Mgbakọ

1. Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
2. Debe isi unit n'elu larịị, kwụsiri ike.
3. Attach the stainless steel food bowl to the base of the main unit, ensuring it clicks securely into place.
4. Place the food tank onto the main unit, aligning it properly.
5. Secure the lid onto the food tank.

3.2 Ike inye

• Connect the power adapter to the power input port on the back or side of the main unit.
• Tinye nkwụnye ọkụ n'ime oghere eletrik ọkọlọtọ.
• The feeder will power on, and indicator lights may illuminate.
• Note: This model does not require batteries for primary operation.

3.3 Ijupụta Tankị nri

1. Remove the lid from the food tank.
2. Pour dry pet food into the tank. Ensure the food kibble size is appropriate for automatic feeders (typically 5-15mm in diameter) to prevent jamming.
3. Ejula tankị ahụ.
4. Dochie mkpuchi ahụ nke ọma.

4. Ntuziaka ọrụ

The Rojeco RWSQ-02 features a simple button interface for programming meal schedules.

4.1 Ogwe njikwa gafereview

The control panel typically includes buttons for setting time, meals, portions, and a manual feed button. Refer to the markings on your specific unit for exact button functions.

4.2 Setting Meal Times and Portions

1. Tọọ oge ugbu a: Press and hold the "SET" button (or equivalent) until the time display flashes. Use the "UP" and "DOWN" buttons to adjust the hour and minute. Press "SET" again to confirm.
2. Program Meal 1: Press the "MEAL" button (or equivalent) to enter meal programming mode. The display will show "M1". Use "UP" and "DOWN" to set the desired feeding time for Meal 1. Press "SET" to confirm.
3. Set Portion for Meal 1: After setting the time for Meal 1, the portion size will flash. Use "UP" and "DOWN" to select the number of portions (each portion typically corresponds to a specific volume of food). Press "SET" to confirm.
4. Program Additional Meals: Repeat steps for Meal 2, Meal 3, etc., as supported by your feeder (up to 4 meals are common).
5. Exit Programming: The feeder will automatically exit programming mode after a few seconds of inactivity, or you can press a designated "EXIT" button if available.

4.3 Nri akwụkwọ ntuziaka

To dispense food manually, press the "MANUAL" button (or equivalent). Each press will dispense one portion of food. This is useful for extra treats or to test the feeder.

4.4 Ihe ngosi ọkụ

The feeder may have indicator lights to show its status:

• Ọkụ ndụ ndụ: Na-egosi ọrụ nkịtị.
• Red Light (Flashing/Solid): May indicate a low food level, a jam, or an error. Refer to the troubleshooting section.

5. Nlekọta

Regular cleaning ensures hygiene for your pet and extends the life of your feeder.

5.1 Ịkwapụ ihe maka nhicha

1. Unplug the power adapter from the wall outlet and the feeder.
2. Remove any remaining food from the tank.
3. Remove the lid and the food tank from the main unit.
4. Detach the stainless steel food bowl from the base.

5.2 Ntuziaka nhicha

• Food Tank and Bowl: Wash these components with mild soap and water. Rinse thoroughly and dry completely before reassembly. These parts are typically dishwasher-safe on the top rack, but hand washing is recommended for longevity.
• Isi ngalaba: Jiri nwayọ hichaa mpụta nke isi ihe, damp akwa . Ejila akụkụ isi na mmiri. Ensure no water enters the control panel or power input.
• Dispenser Mechanism: Use a dry brush or cloth to remove any food residue from the dispenser chute.

5.3 Mkpokọta

1. Ensure all cleaned parts are completely dry.
2. Reattach the food bowl to the main unit.
3. Place the food tank back onto the main unit.
4. Chekwaa mkpuchi ahụ.
5. Refill with dry pet food and reconnect the power.

6. Nchọpụta nsogbu

If you encounter issues with your Rojeco Automatic Pet Feeder, refer to the following common problems and solutions:

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

8.1 Ozi akwụkwọ ikike

The Rojeco 2L Automatic Pet Feeder (Model RWSQ-02) comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your purchase receipt as proof of purchase for warranty claims.

8.2 Nkwado ndị ahịa

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Rojeco customer support. Contact details can typically be found on the product packaging, the official Rojeco website, or your purchase platform.

Please have your model number (RWSQ-02) and purchase information ready when contacting support.