1. Okwu mmalite
Thank you for choosing the ECOELER 5-Inch LED Surface Mount Downlight. This low-profile fixture is designed for easy installation and offers versatile lighting options with its 5CCT selectable color temperature and smooth dimming capabilities. This manual provides essential information for safe installation, operation, and maintenance of your new LED downlight.
Image 1.1: ECOELER 5-Inch LED Surface Mount Downlights.
2. Ozi nchekwa
Please read all instructions carefully before installation and retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- ỊDỌ AKA NA NTỊ: Ihe ize ndụ nke mkpọ ọkụ eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu ịwụnye ma ọ bụ rụọ ọrụ.
- A ga-etinyerịrị ngwaahịa a dịka koodu nrụnye ọdabara si dị site n'aka onye maara ihe nrụpụta na arụmọrụ nke ngwaahịa na ihe egwu dị.
- Use only 120V AC, 60Hz circuits.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Kwesịrị ekwesị maka damp locations. Not suitable for direct exposure to water.
- Ensure all electrical connections are secure and correct.
- Ejila aka mmiri jide ihe nrụnye ahụ.
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- ECOELER 5-Inch LED Surface Mount Downlight (4 units)
- Akụrụngwa arịọnụ (skru)
- Mkpụrụ Mkpụrụ
Image 3.1: Product Dimensions and Included Components (Screws, Wire Nuts).
4. Akụrụngwa Ngwaahịa
- 5CCT Selectable Color Temperature: Choose from Soft White (2700K), Warm White (3000K), Cool White (4000K), Day Light (5000K), and Bright White (6000K) to suit various environments and preferences.
- Smooth Dimmable: Compatible with most standard dimmers, allowing for seamless brightness adjustment from 5% to 100% without flickering or humming.
- Icha ọkụ dị elu: Delivers 850 Lumens at 10.5 Watts, providing efficient illumination.
- Pro dị alafile Nhazi: Ideal for installations with limited ceiling space.
- Ihe owuwu na-adịgide adịgide: Features an aluminum ring and sealed design for longevity.
- Ekwenyere na nchekwa: ETL & FCC compliant.
Image 4.1: High Performance Features.
Image 4.2: High-quality LEDs and Sealed Design for durability.
5. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | YSLIM-5CCT |
| Akụkụ | 4.96"L x 4.96"W x 1.33"H |
| Wattage | 10.5 Watt |
| Icha ọkụ | 850 Lumen |
| Okpomọkụ agba | 5CCT Selectable (2700K, 3000K, 4000K, 5000K, 6000K) |
| Voltage | 125 volts (AC) |
| CRI | 90+ |
| Enwere ike ibelata | Yes (5%-100% smooth dimming) |
| Ihe onwunwe | Aluminom |
| Ụdị nwụnye | Flush Mount (fits 4" Junction Box) |
| Ojiji ime ime/n'èzí | N'ime ụlọ (Dabara maka damp ebe) |
| Asambodo | ETL, FCC |
6. Ntuziaka nwụnye
Follow these steps to properly install your ECOELER LED Surface Mount Downlight. Ensure power is disconnected at the circuit breaker before starting.
- Kwadebe Ihe Ndozi: Gently remove the trim ring from the luminaire. This will expose the mounting holes and the CCT selection switch.
- Họrọ okpomoku agba: Before mounting, locate the 5CCT selection switch on the side of the fixture. Slide the switch to your desired color temperature (2700K, 3000K, 4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.
- Jikọọ Wiring: Connect the fixture's wires to the corresponding wires in your 4-inch junction box using the provided wire nuts. Connect the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire. Ensure all connections are secure.
- Ugwu ihe ndozi ahụ: Align the fixture with the junction box. Secure the luminaire to the junction box using the provided screws.
- Tinye Mkpụmkpụ ahụ: Once the luminaire is securely mounted, twist the trim ring back onto the luminaire until it is firmly in place.
- Weghachi ike: Weghachite ike na sekit breaker.
Image 6.1: Easy Installation Steps and CCT Selection Switch.
Image 6.2: Internal Components and CCT Selector.
7. Ọrụ
The ECOELER LED Surface Mount Downlight is designed for simple operation once installed.
- Gbanyụọ/ Gbanyụọ: Jiri ihe mgba ọkụ mgbidi nkịtị gị gbanye ma ọ bụ gbanyụọ ihe nkwụnye ọkụ ahụ.
- Nhọrọ okpomọkụ agba: The color temperature is set via a switch on the fixture itself during installation (refer to Section 6, Step 2). Once installed, the color temperature remains constant unless the fixture is uninstalled to access the switch.
- Ọrụ mmechi: If connected to a compatible dimmer switch, you can adjust the brightness from 5% to 100%. Ensure your dimmer is LED-compatible for optimal performance.
Image 7.1: Smooth Dimming Capability.
Image 7.2: Compatible Dimmer Models.
8. Nlekọta
The ECOELER LED Surface Mount Downlight requires minimal maintenance.
- Nhicha: Hụ na agbanyụrụ ọkụ tupu ị sachaa ya. Jiri ihe dị nro, kpọrọ nkụ, ma ọ bụ obere ihe hichaa ihe nkwụnye ọkụ ahụ.amp Ákwà. Ejila kemịkalụ siri ike, ihe nhicha ihe na-eme ka ihe dị nro, ma ọ bụ ihe mgbaze, n'ihi na ihe ndị a nwere ike imebi ihe ndị dị n'ime ya ma ọ bụ ihe ndị dị n'ime ya.
- Ndokwa bọlbụ: The LED light source is integrated and not user-replaceable. The fixture is designed for a long lifespan of approximately 50,000 hours.
- Nyocha: Lelee ihe nkwụnye ọkụ ahụ mgbe niile iji hụ ma ọ bụrụ na ihe ndị na-egosi mmebi ma ọ bụ njikọ ndị na-adịghị mma. Ọ bụrụ na achọpụta nsogbu ọ bụla, gbanyụọ ọkụ eletrik ma gakwuru ọkachamara ọkụ eletrik ruru eru.
9. Nchọpụta nsogbu
If you experience issues with your ECOELER LED downlight, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo | No power to the fixture; Loose wiring; Faulty switch or circuit breaker. | Check circuit breaker and wall switch. Verify all wire connections are secure. Test power at the junction box. |
| Light flickers or hums | Switch dimmer na-ekwekọghị; Waya siri ike. | Ensure dimmer is LED-compatible (refer to Section 7, Image 7.2). Check wiring connections. |
| Ọnọdụ agba na-ezighi ezi | Edobere mgba ọkụ CCT nke na-ezighi ezi. | Disconnect power, remove fixture, and adjust the CCT selection switch (refer to Section 6, Step 2). |
| Ìhè dị oke inyoghi ma ọ bụ na-egbuke egbuke | Dimmer setting; Incorrect CCT selection. | Adjust dimmer switch. Consider if a different CCT setting would provide desired perceived brightness. |
If the problem persists after attempting these solutions, please contact ECOELER customer support.
10. Akwụkwọ ikike na nkwado
ECOELER provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ECOELER customer service.
If you encounter any problems during use or require technical assistance, please contact ECOELER customer support. We are committed to providing a response within 24 hours.
Ozi mkpọtụrụ:
- For support, please visit the official ECOELER websaịtị ma ọ bụ lee akwụkwọ ịzụrụ ihe gị.
