Okwu mmalite
Thank you for choosing the hygger HG097-50W Small Aquarium Heater. This submersible heater is designed to maintain a stable and appropriate temperature for your aquatic pets in tanks up to 10 gallons. It features an external temperature controller, an LED display, and multiple safety protections to ensure a safe and comfortable environment for your fish or turtles.
Ntuziaka nchekwa
- Always ensure the heater is imikpu mmiri nke ọma in water before plugging it into a power outlet.
- Do not operate the heater if the power cord or plug is damaged.
- Unplug the heater from the power source before performing any maintenance, cleaning, or when handling the aquarium water.
- Allow the heater to cool down for 10-20 minutes after unplugging before removing it from the water to prevent burns or damage.
- Keep the external controller dry and away from water.
- This heater is suitable for both freshwater and saltwater aquariums.
Ihe ngwugwu
- 1 x hygger HG097-50W Small Aquarium Heater
- 1 x External Temperature Controller (integrated with power cord)
- 2 x Suction Cups (pre-installed)
- 1 x Akwụkwọ ntuziaka onye ọrụ
Njirimara ngwaahịa
- Nhazi kọmpat: Slim, flat profile (4.6''x 2.7''x 0.9'') ideal for small and shallow tanks, including turtle habitats.
- Mgbanwe okpomọkụ: External controller allows setting temperatures from 59-93°F (15-34°C) with 1°F accuracy.
- Ikanam Display: Shows real-time water temperature and set temperature. Red light indicates heating, green light indicates target temperature reached.
- Nchekwa ekpo oke ọkụ: Automatically stops heating and flashes 'HH' error code if water temperature exceeds 93°F.
- Out of Water Protection: Automatically shuts off and flashes 'Er' error code if water level is too low.
- Ọrụ ebe nchekwa gbanyụọ: Retains the last temperature setting after a power interruption.
- Ihe owuwu na-adịgide adịgide: Made with heat-resistant ABS protective shell, nickel-chromium heating wire, and non-corrosive quartz glass.
Melite
- Wepu igwe ọkụ: Carefully remove the heater and its components from the packaging.
- Họrọ ebe: The heater can be placed vertically or horizontally at the bottom of the aquarium. Ensure it is fully submerged in water.
- Secure with Suction Cups: Use the pre-installed suction cups to firmly attach the heater to the inner wall or bottom of your tank.
- Jikọọ na Ike: Plug the power cord into a standard AC 110-120V/60Hz electrical outlet.
Ntuziaka ọrụ
- Ike Na: Once plugged in and fully submerged, the LED display on the heater will show the current water temperature.
- Tọọ okpomọkụ: Use the 'SET' button on the external controller to adjust the desired temperature. Each press will cycle through the available temperature range (59-93°F). The display will blink to indicate you are in setting mode.
- Kwenye ntọala: Stop pressing the button when your desired temperature is displayed. The heater will automatically save the setting after a few seconds of inactivity.
- Ihe ngosi ikpo oku: A red light on the heater's display indicates that the heater is actively warming the water.
- Temperature Reached Indicator: A green light on the heater's display indicates that the water has reached the set temperature and the heater is maintaining it.
- Ọrụ ebe nchekwa: The heater will remember your last set temperature even after a power outage, eliminating the need to reset it.
Atụmatụ nchekwa
- Nchekwa ekpo oke ọkụ: If the water temperature exceeds 93°F, the heater will automatically stop heating and display an 'HH' error code. It will resume normal operation once the temperature drops to a safe level.
- Out of Water Protection: If the water level drops below the minimum required for full submersion, or if the heater is exposed to air, it will automatically shut off and display an 'Er' error code to prevent dry burning.
Nlekọta
Regular cleaning of your heater is essential for optimal performance and longevity.
- Kpupụ wee dị jụụ: Always unplug the heater from the power outlet and allow it to cool in the water for 10-20 minutes before attempting to remove it.
- Remove from Tank: Carefully remove the cooled heater from the aquarium.
- Hichaa elu ahụ: Gently wipe the heater's surface with a soft cloth to remove any algae or mineral buildup. For stubborn deposits, a soft brush can be used. Avoid abrasive cleaners or harsh chemicals.
- Tinyegharịa: Once clean, place the heater back into the aquarium, ensuring it is fully submerged, and then plug it back in.
Nchọpụta nsogbu
| Koodu mperi | Nkọwa | Ngwọta |
|---|---|---|
| Er | Out of Water / Low Water Level | Ensure the heater is fully submerged in water. Add water to the tank if necessary. The heater will resume operation once properly submerged. |
| HH | ekpo oke ọkụ | The water temperature has exceeded 93°F. The heater has automatically shut off. Check the ambient temperature and ensure proper tank ventilation. The heater will reactivate when the water cools down. |
| Ngosipụta anaghị arụ ọrụ | No power or faulty unit | Check power connection. Ensure the outlet is functional. If the issue persists, contact customer support. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | HG097-50W |
| Ike | 50W |
| Ngwa | 5-10 Gallon Tanks |
| Voltage/Ugboro ugboro | AC 110-120V/60Hz (US Standard) |
| Ogologo eriri | 2.6ft + 3.9ft (0.8m + 1.2m) |
| Okpomọkụ ziri ezi | ±1°F (±1°C) |
| Oke njikwa | 59-93°F (15-34°C) |
| Akụkụ oku oku oku | 4.6" x 2.7" x 0.9" (1.8 x 1 x 0.4 cm) |
| Ihe onwunwe | ABS, Quartz Glass |
Akwụkwọ ikike & Nkwado
The hygger HG097-50W Small Aquarium Heater comes with a Akwụkwọ ikike nke ọnwa 12 site na ụbọchị ịzụrụ. Akwụkwọ ikike a na-ekpuchi ntụpọ nrụpụta na adịghị arụ ọrụ n'okpuru ojiji nkịtị.
For technical support, warranty claims, or any questions regarding your product, please contact hygger customer service through the retailer where you purchased the product or visit the official hygger websaịtị maka ozi kọntaktị.
