Okwu mmalite
Daalụ maka ịzụrụasing the EGLO Brenda 1-Light Mini Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
The EGLO Brenda Mini Pendant is an indoor lighting fixture designed to provide ambient illumination. It features a black finish with a black and white interior metal shade, suitable for various interior design styles.
Image of the EGLO Brenda 1-Light Mini Pendant, showcasing its black exterior and contrasting white interior shade.
Ozi nchekwa
Ịdọ aka ná ntị: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation, servicing, or cleaning. Ensure all wiring connections are secure and comply with local electrical codes.
- A na-eme ihe a maka naanị maka ime ụlọ.
- Agafela oke wattage akọwapụtara maka bọlbụ ahụ.
- Jiri nlezianya jikwaa ihe ndị mejupụtara iko ka ọ ghara imebi.
- Kpọtụrụ onye ọrụ eletrik tozuru oke ma ọ bụrụ na ị maghị akụkụ ọ bụla nke usoro nrụnye.
Ihe ngwugwu
Verify that all components are present before discarding packaging materials.
- Brenda 1-Light Mini Pendant Fixture
- Ngwa ngwa mgbakwunye
- Akwụkwọ ntuziaka
Ntọala na nwụnye
Assembly is required for this fixture. Ensure power is disconnected before proceeding.
- Kwadebe Mpaghara Nwụnye: Turn off power at the circuit breaker. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 4 pounds).
- Wụnye ngwaike Mounting: Use the provided mounting hardware to secure the fixture's mounting bracket to the junction box in the ceiling. The mounting type is protruding.
- Adjust Hanging Length: The pendant features an adjustable hanging length via its black cable. Determine the desired height for the fixture and adjust the cable accordingly. Secure the cable in place as per the detailed instructions in the included manual.
- Wepu ihe ndozi ahụ: Connect the fixture's electrical wires to the corresponding household wires (typically black to black, white to white, and ground to ground). Use appropriate wire connectors and ensure all connections are secure. This fixture operates on 120 Volts AC/DC.
- Tinye ihe eji etinye ihe: Carefully attach the pendant fixture to the mounting bracket, ensuring all wires are tucked safely into the junction box.
- Wụnye bọlbụ: Insert one standard incandescent or LED bulb (not included) into the socket. Do not exceed the maximum wattage of 60 watts. The opening at the bottom of the shade is 5.39 inches for bulb access.
- Weghachi ike: Ozugbo echichi zuru ezu na njikọ niile echekwara, weghachi ike na ihe nbibi sekit.
Ntuziaka ọrụ
The EGLO Brenda Mini Pendant is designed for simple operation once installed.
- Gbanyụọ/ Gbanyụọ: Control the light using a standard wall switch connected to the fixture's circuit.
- Ndakọrịta bọlbụ: This fixture is LED compatible and designed for one light source. Use bulbs up to 60 watts.
- Ụzọ ọkụ: The fixture provides downlight illumination.
Nlekọta
Nlekọta mgbe niile ga-enyere aka chekwaa ọdịdị na ọrụ nke ìhè pendant gị.
- Nhicha: Wepụ ike tupu ị sachaa ya. Jiri ákwà dị nro ma kpọọ nkụ hichaa ihe eji arụ ọrụ ahụ. Ejila ihe nhicha ma ọ bụ ihe mgbaze, n'ihi na ha nwere ike imebi ihe eji arụ ọrụ ahụ.
- Ndokwa bọlbụ: Disconnect power before replacing the bulb. Allow the old bulb to cool completely before removing. Replace with a new bulb of the same type and wattage (max 60W).
Nchọpụta nsogbu
If your pendant light is not functioning correctly, refer to the following common issues and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ikike na ngwa. | Lelee ihe mgbawa sekit ma ọ bụ fuse. Hụ na ihe mgbanyụ mgbidi dị n'ọnọdụ 'ON'. |
| Igwe ọkụ adịghị mma ma ọ bụ tọgbọrọ chakoo. | Dochie bọlbụ ma ọ bụ mechie ya na oghere. | |
| Wiring na -ezighi ezi. | Disconnect power and re-check all wiring connections. Consult an electrician if necessary. | |
| Ìhè flickers. | Loose bulb or wiring connection. | Tighten bulb. Disconnect power and check wiring connections. |
| Mgbanwe dimmer na-ekwekọghị ekwekọ. | Ensure dimmer switch is compatible with the bulb type (e.g., LED compatible dimmer for LED bulbs). |
If the problem persists after attempting these solutions, contact customer support or a qualified electrician.
Nkọwapụta
| Ụdị | EGLO |
| Aha Nlereanya | Brenda |
| Nọmba nlereanya | 98735A |
| Agba | Nwa |
| Ihe onwunwe | Alloy Steel, Metal (Fixture); Metal (Shade) |
| Ụdị | Ntughari |
| Akụkụ ngwaahịa | 12.6"L x 12.6"W x 6.85"H |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Isi Iyi Ike | AC/DC |
| Voltage | 120 volts |
| Max Wattage | 60 Watt |
| Ọnụọgụ nke isi mmalite ọkụ | 1 |
| Ụdị nkwụnye | Na-apụta |
| Mgbakọ chọrọ | Ee |
| Ibu Ibu | 4 pound |
Ozi akwụkwọ ikike
This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or visit the official EGLO websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka ebumnuche ikike.
Nkwado na kọntaktị
For further assistance, technical support, or inquiries regarding your EGLO Brenda Mini Pendant, please visit the official EGLO website or contact their customer service department. Contact information can typically be found on the EGLO websaịtị ma ọ bụ na nkwakọ ngwaahịa.
Onye nrụpụta: EGLO
