SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8 User Manual

1. Okwu mmalite

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Ngwaahịa gafereview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Foto 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Nhazi

3.1 Ịchaji ngwaọrụ

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Gbanyụọ/ gbanyụọ

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Njikọ Bluetooth Mmalite

1. Ensure the AN-SX8 is powered off.
2. Pịa ma jide bọtịnụ Ike ruo ihe dị ka sekọnd 5-7 ruo mgbe ìhè ihe ngosi ahụ na-enwu ngwa ngwa, na-egosi ụdị njikọ.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Ntuziaka ọrụ

4.1 Njikọ Bluetooth

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 Njikọ AUX

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Njikwa olu

• Pịa Elu elu (+) bọtịnụ ka iwelie olu.
• Pịa Olu ala (-) bọtịnụ iji belata olu.

4.4 Playback Control (Bluetooth Mode)

• Pịa Gwuo/kwụsịtụ bọtịnụ otu ugboro iji kpọọ ma ọ bụ kwụsịtụ ọdịyo.
• Pịa ugboro abụọ Gwuo/kwụsịtụ bọtịnụ ka ịgafe na egwu na-esote.
• Pịa ugboro atọ Gwuo/kwụsịtụ bọtịnụ ịga na egwu gara aga.

4.5 Call Handling (Bluetooth Mode)

• Pịa Gwuo/kwụsịtụ pịa otu ugboro iji zaa oku mbata.
• Pịa Gwuo/kwụsịtụ bọtịnụ otu ugboro n'oge oku iji kwụsị ya.
• Pịa ma jide Gwuo/kwụsịtụ bọtịnụ maka sekọnd atọ iji jụ oku mbata.

5. Nlekọta

5.1 Nhicha

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Nchekwa

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Nlekọta batrị

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Nchọpụta nsogbu

• Enweghị ike: Ensure the device is fully charged. Connect it to a power source and check the charging indicator.
• Enweghị ụda:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • Ọ bụrụ na ị na-eji Bluetooth, gbalịa ịkwụsị ma jikọọ ngwaọrụ ahụ ọzọ.
• Okwu njikọ Bluetooth:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Gbanyụọ ma gbanye Bluetooth na ngwaọrụ isi iyi gị.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Ụda agbagọ:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Lelee isi iyi ọdịyo maka nsogbu dị mma.

7. Nkọwapụta

8. Ozi nchekwa

• Ewepụla ngwaọrụ ahụ na mmiri, mmiri, ma ọ bụ oke okpomọkụ.
• Zere ige ntị ruo ogologo oge n'olu dị elu iji gbochie mmebi ntị.
• Anwala ịkwasa, rụkwaa ma ọ bụ gbanwee ngwaọrụ ahụ.
• Debe ebe ụmụaka na anụ ụlọ na-apụghị iru.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Maka enyemaka ọzọ, biko gaa na SHARP Support Websaịtị (Example njikọ, ezigbo njikọ nwere ike ịdị iche).