1. Okwu mmalite
The AOPUTTRIVER AP-5000K is a portable digital anemometer designed for accurate measurement of wind speed, temperature, and humidity. This device is suitable for various applications including outdoor sports, environmental monitoring, and industrial use. It features a large LCD display, a 270° rotatable sensor, and multiple measurement units for versatility.
2. Ngwaahịa gafereview
Familiarize yourself with the components of your AP-5000K anemometer.
Foto 2.1: N'ihu view of the AP-5000K Anemometer with key components labeled.
- Fan Cover: Protects the wind speed sensor.
- Wind Chill Sensor: Measures wind chill temperature.
- Tripod Screw Hole: Allows mounting on a standard 1/4-inch tripod.
- Bọtịnụ jide: Na-akpọchi nha ugbu a na ngosipụta ahụ.
- Bọtịnụ UNIT: Changes the unit of measurement for wind speed.
- Bọtịnụ ọkụ azụ: Na-eme ka ìhè azụ ngosi rụọ ọrụ ma ọ bụ gbanyụọ ya.
- Ike On / Gbanyụọ Button: Gbanyụọ ma ọ bụ gbanyụọ ngwaọrụ.
- bọtịnụ Celsius C/F: Toggles between Celsius and Fahrenheit for temperature display.
- Bọtịnụ MAX/MIN: Displays maximum, minimum, or average readings.
3. Nkọwapụta
Image 3.1: Detailed technical parameters of the AP-5000K Anemometer.
| Oke | Uru |
|---|---|
| Oke ọsọ ikuku | 0.30 ruo 30.00 m / s |
| Izizi ọsọ ikuku | <1.00m/s: ±0.3m/s, 1.00-30.00m/s: ±(2.0%+0.5m/s) |
| Oke okpomọkụ | -20.0 Celsius ruo 60.0 Celsius (-4.0 °F ruo 140.0 Celsius F) |
| Okpomọkụ ziri ezi | 0.0 °C to 45.0 °C: ±1.0 °C; others: ±1.5 °C |
| Oke iru mmiri | 0.0% ruo 99.9% RH |
| Ikike iru mmiri | 20% to 80% RH: ±5.0% RH; others: ±6.0% RH |
| Nkeji ọsọ ikuku | m/s, km/h, ft/s, ft/m, knots, mph |
| Akụkụ (L x W x H) | 21 x 7.2 x 3.5 cm (8.27 x 2.83 x 1.38 inch) |
| Ibu | 350 grams (0.77 lbs) |
| Ihe onwunwe | Acrylonitrile Butadiene Styrene (ABS) |
| Gbanyụọ ike akpaaka | Mgbe nkeji 10 nke arụghị ọrụ |
4. Nhazi
4.1 Ntinye batrị
The AP-5000K requires two AAA batteries for operation. To install:
- Chọta mkpuchi nke batrị n'azụ ngwaọrụ.
- Use the provided small screwdriver to loosen the screw on the battery cover.
- Wepu mkpuchi batrị.
- Fanye batrị AAA abụọ, na-ahụ polarity ziri ezi (+/-).
- Dochie mkpuchi batrị wee mee ka ịghasa sie ike.
4.2 Ike mbido
After installing batteries, press the Gbanyụọ/ Gbanyụọ button to turn on the device. The LCD display will illuminate.
5. Ntuziaka ọrụ
5.1 Gbanyụọ ma ọ bụ gbanyụọ
- Pịa Gbanyụọ/ Gbanyụọ button to turn the anemometer on.
- Pịa ma jide Gbanyụọ/ Gbanyụọ button for a few seconds to turn the anemometer off.
- Ngwaọrụ ahụ ga-agbanyụ na-akpaghị aka ka nkeji 10 enweghị ọrụ iji chekwaa ndụ batrị.
5.2 Mgbanwe Ngwa Ọsọ Ifufe
With the device powered on, press the UNIT button repeatedly to cycle through the available wind speed units: m/s, km/h, ft/s, ft/m, knots, and mph.
5.3 Na-agbanwe nkeji okpomọkụ
Pịa ° C/° F button to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
5.4 Measurement Modes (MAX/MIN/AVG)
Pịa MAX/MIN button to cycle through different measurement modes:
- Oke: Displays the maximum recorded wind speed, temperature, or humidity since the device was powered on or the mode was reset.
- MIN: Displays the minimum recorded wind speed, temperature, or humidity.
- Ọkara: Displays the average recorded wind speed, temperature, or humidity.
- Pressing the button again will return to real-time measurement.
5.5 Data Jide Ọrụ
Pịa Jide button to freeze the current readings on the display. Press it again to release the hold and resume real-time measurements.
5.6 Ndabere
Pịa Ìhè azụ button to turn the LCD backlight on or off, improving visibility in low-light conditions.
5.7 270° Rotatable Sensor
The wind speed sensor probe can be rotated up to 270 degrees. This allows for flexible positioning to accurately capture wind flow from various directions without needing to reposition the entire device.
5.8 Nwụnye Tripod
The AP-5000K includes a 1/4-inch tripod screw hole at its base, allowing it to be mounted on a standard tripod for stable, hands-free measurements, particularly useful for extended monitoring or when precise positioning is required.
Image 5.1: The AP-5000K with its tripod screw hole and non-slip grip. Note: Tripod not included.
6. Nlekọta
- Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa ngwaọrụ ahụ. Ejila ihe nhicha ma ọ bụ ihe mgbaze.
- Nchekwa: Store the anemometer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
- Nlekọta ihe mmetụta: Keep the wind speed sensor (fan) free from dust and debris to ensure accurate readings. Avoid touching the fan blades directly.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ngwaọrụ anaghị agbanwu ọkụ | Batrị nwụrụ anwụ ma ọ bụ arụnyere na ezighi ezi | Check battery polarity, replace with new batteries. |
| Inaccurate wind speed readings | Ihe mgbochi gbochiri ma ọ bụ mebie | Ensure the fan is clear of obstructions and rotates freely. Avoid strong impacts. |
| Ngosipụta ahụ dị obere ma ọ bụ na-enwu enwu | Ike batrị dị ala | Dochie batrị. |
| No display or partial display | Ngwaọrụ adịghị arụ ọrụ | Remove and reinsert batteries. If the problem persists, contact customer support. |
8. Akwụkwọ ikike na nkwado
The AOPUTTRIVER AP-5000K Anemometer comes with a 1-year warranty from the date of purchase. Additionally, lifetime technical support is provided. If you encounter any issues or have questions regarding the product, please contact AOPUTTRIVER customer service for assistance.
9. Ihe ngwugwu
Upon opening your AOPUTTRIVER AP-5000K package, you should find the following items:
Image 9.1: All items included in the AP-5000K product package.
- 1 x AOPUTTRIVER AP-5000K Digital Anemometer
- 2 x AAA batrị
- 1 x Akwụkwọ ntuziaka onye ọrụ
- 1 x Akpa na-ebu
- 1 x Obere Skrewdriver
