Akwụkwọ ntuziaka onye ọrụ Bimar HP129 Electric Column Heater

1. Okwu mmalite

Thank you for choosing the Bimar HP129 Electric Column Heater. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before first use and retain it for future reference. This product is designed for heating indoor domestic environments up to 20 m² and is suitable for properly insulated spaces as a supplementary energy-saving heater.

2. Ntuziaka nchekwa

Iji gbochie mmerụ ahụ ma ọ bụ mmebi, na-edebe ihe nchekwa nchekwa ndị a mgbe niile:

• Ensure the heater is placed on a stable, level surface to prevent tipping. The appliance includes an anti-tip switch for safety.
• Do not cover the heater or obstruct its air inlets and outlets. Overheating can occur, activating the integrated safety device.
• Keep the heater away from water, moisture, and flammable materials such as curtains, furniture, or paper.
• Do not use the heater in dusty environments or where extremely volatile materials are present.
• Always unplug the heater before cleaning or moving it.
• Do not insert any objects into the heater's openings.
• Ebughị ngwa a maka ndị mmadụ (gụnyere ụmụaka) nwere ike anụ ahụ, mmetụta uche, ma ọ bụ nke uche, ma ọ bụ enweghị ahụmịhe na ihe ọmụma, ma ọ bụrụ na enyereghị ha nlekọta ma ọ bụ ntụziaka gbasara iji ngwa ahụ site n'aka onye na-ahụ maka nchekwa ha. .
• Ekwesịrị ilekọta ụmụaka ka ha hụ na ha ejighi ngwa eji egwu egwu egwu.

3. Ngwaahịa gafereview

The Bimar HP129 is an electric column heater featuring PTC ceramic resistance for efficient heating. It includes an aluminum propeller for effective and quiet ventilation, and a plastic body with an integrated handle for easy transport.

Njikwa

The heater features two main control dials located on the top panel:

• Power Selector Dial: Controls the operating mode (Off, Fan only, 1000W warm air, 2000W very hot air with oscillation).
• Ọkpọ oku Thermostat: Na-emezi ọnọdụ okpomọkụ nke ụlọ achọrọ.

4. Nhazi

Before initial use, follow these steps:

1. Unpack the heater and place it on a firm, level, and heat-resistant surface.
2. Ensure there is adequate clearance around the heater (at least 50 cm from walls, furniture, and curtains).
3. Plug the heater into a suitable electrical outlet (220-240V ~ 50Hz).
4. Ojiji mbụ: Upon first use, operate the heater for at least 10-15 minutes to eliminate the 'new smell'. During this period, ensure the room is well-ventilated.

5. Ntuziaka ọrụ

Ntọala ike

Use the Power Selector Dial to choose your desired operating mode:

• Gbanyụọ (0): Na-agbanyụ ihe na-ekpo ọkụ.
• Fan Only (Fan icon): Activates the fan without heating, providing air circulation.
• Warm Air (1000W): Provides 1000W of heating power.
• Very Hot Air (2000W) with Oscillation: Provides 2000W of heating power and activates the automatic right/left oscillation function for wider heat distribution.

Njikwa okpomọkụ

The thermostat dial allows you to set the desired room temperature. Turn the dial clockwise to increase the temperature setting and counter-clockwise to decrease it. The heater's PTC technology automatically adjusts power consumption based on the ambient temperature, providing maximum power at low temperatures and reducing it as the room warms up.

The room thermostat regulates the device's operation: it runs continuously until the set temperature is reached, then cycles on and off at intervals to maintain the temperature constant. An indicator light on the control panel illuminates when the heater is actively heating and turns off when the set temperature is reached.

6. Nlekọta

Nlekọta oge niile na-eme ka arụmọrụ dị mma na ogologo ndụ nke ikpo ọkụ gị.

Nhicha

1. Mgbe niile, wepụ ihe na-ekpo ọkụ ahụ na ebe a na-ere ọkụ eletrik ma hapụ ya ka ọ jụọ oyi kpamkpam tupu e hichaa ya.
2. Jiri nwayọ hichaa elu mpụta, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing.
3. Ejila ikpo ọkụ na mmiri ma ọ bụ mmiri mmiri ọ bụla ọzọ.
4. Periodically clean the air intake and outlet grilles with a soft brush or vacuum cleaner to remove dust and debris.

Nchekwa

Mgbe ị na-ejighị ya, debe ihe na-ekpo ọkụ ahụ n'ebe dị jụụ ma kpọọ nkụ, ọ kacha mma ka ọ dịrị na ngwugwu mbụ ya, ebe anwụ na-acha kpọmkwem ma ọ bụ mmiri adịghị.

7. Nchọpụta nsogbu

If you encounter issues with your Bimar HP129 heater, refer to the following common problems and solutions:

• Ihe na-ekpo ọkụ anaghị agba ọkụ:
  • Lelee ma ọ bụrụ na etinyere eriri ọkụ n'ime oghere eletrik na-arụ ọrụ.
  • Ensure the Power Selector Dial is not set to 'Off' (0).
  • Verify that the anti-tip switch on the base of the heater is engaged (heater is on a flat surface).
• Heater stops operating unexpectedly:
  • The integrated safety device may have activated due to overheating. Unplug the heater, allow it to cool down for at least 30 minutes, and check for any obstructions blocking the air inlets or outlets.
  • If the heater stops after reaching the set temperature and does not restart automatically, try turning it off, waiting approximately 5 minutes, and then turning it back on. If the issue persists, contact customer support.
• Okpomọkụ ezughi oke:
  • Ensure the thermostat dial is set to a higher temperature than the current room temperature.
  • Check that the Power Selector Dial is set to 1000W or 2000W, not just 'Fan Only'.
  • Confirm the room size is within the recommended 20 m² for effective heating.

For problems not listed here, or if solutions do not resolve the issue, please contact Bimar customer support.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, or spare parts availability, please refer to the documentation provided with your purchase or contact Bimar customer service directly. Contact details can typically be found on the manufacturer's official websaịtị ma ọ bụ na nkwakọ ngwaahịa.