1. Ozi nchekwa
Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
- Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
- Ejila igwe na-akpụ akpụ na ahịhịa mmiri ma ọ bụ mmiri ozuzo.
- Clear the area of objects such as rocks, toys, and wires before mowing.
- Never allow children or untrained individuals to operate the lawn mower.
- Refuel in a well-ventilated area with the engine off and cool. Do not smoke while refueling.
- Always disconnect the spark plug wire before performing any maintenance or cleaning.
2. Ntọala na Mgbakọ
Follow these steps to prepare your lawn mower for first use.
2.1 Nwepu
Jiri nlezianya wepụ ihe niile dị na ngwugwu ahụ. Hụ na akụkụ niile dị dịka ndepụta ngwugwu si dị.
2.2 Jikwaa Mgbakọ
- Unfold the handle and secure it in the operating position using the provided knobs or levers.
- Ensure all cables are routed correctly and not pinched.
2.3 Na-agbakwụnye mmanụ Engine
The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.
- Tinye mower n'elu ala dị larịị.
- Chọta okpu/dipstick mmanụ jupụtara.
- Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
2.4 Na-agbakwunye mmanụ ụgbọala
Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.
- Hụ na injin ahụ gbanyụrụ ma jụọ oyi.
- Mepee okpu mmanụ ụgbọala.
- Fill the fuel tank, leaving a small space for expansion.
- Mechie mkpuchi tank mmanụ ọkụ ahụ nke ọma.
2.5 Grass Collection Bag Attachment
Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.
3. Ntuziaka ọrụ
Familiarize yourself with the controls and operating procedures before starting the engine.
3.1 Malite Engine
- Ensure the fuel tank is filled and engine oil is at the correct level.
- Press the primer bulb (if equipped) 3-5 times until fuel is visible.
- Move the throttle lever to the 'START' or 'CHOKE' position.
- Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
- Once the engine starts, gradually move the throttle lever to the 'RUN' position.
3.2 Ịgbanwe Ogologo Mbelata
The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.
- Ensure the engine is off and the blade has stopped rotating.
- Locate the height adjustment levers, typically near the wheels.
- Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.
3.3 Na-etinye aka na mkpali onwe onye
This model features self-propulsion for easier operation.
- With the engine running, engage the self-propel lever (usually located on the handle).
- The mower will begin to move forward. Release the lever to disengage self-propulsion.
3.4 Emptying the Grass Bag
Regularly check and empty the grass collection bag to maintain optimal cutting performance.
- Stop the engine and wait for the blade to stop completely.
- Lift the rear discharge flap and carefully remove the grass bag.
- Empty the grass clippings into a suitable container.
- Reattach the grass bag securely.
3.5 Ịkwụsị Engine
To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.
4. Nlekọta
Nlekọta anya mgbe niile na-eme ka ogologo ndụ na ịrụ ọrụ kacha mma nke igwe ahịhịa ahịhịa gị.
4.1 Nhicha
- After each use, clean the underside of the mower deck to prevent grass buildup.
- This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
- Jiri mgbasa ozi hichaa mpụtaamp cloth. Do not use high-pressure washers directly on the engine or electrical components.
4.2 Nlekọta agụba
- Regularly inspect the blade for sharpness and damage. A dull blade tears grass, leading to an unhealthy lawn.
- If the blade is dull, have it sharpened or replaced by a qualified service technician.
- Always disconnect the spark plug wire before inspecting or working on the blade.
4.3 Mgbanwe mmanụ mmanụ
Gbanwee mmanụ engine mgbe awa 5 mbụ nke ọrụ gasịrị, mgbe ahụ kwa awa 25 ma ọ bụ kwa afọ, nke ọ bụla na-abịa.
- Gbaa injin ahụ ruo nkeji ole na ole iji kpoo mmanụ ahụ ọkụ.
- Kwụsị injin ahụ wee kwụpụ waya ọkụ ọkụ.
- Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
- Remove the drain plug (or fill cap) and allow the oil to drain completely.
- Replace the drain plug and refill with the recommended amount and type of new engine oil.
4.4 Air Filter Inspection and Cleaning
Inspect the air filter regularly and clean or replace it as needed to ensure proper engine performance.
4.5 Nnyocha nkwụnye ọkụ
Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.
4.6 Nchekwa
For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.
5. Nchọpụta nsogbu
Nkebi a na-eleba anya na nsogbu ndị ị na-enwekarị na igwe ịcha ahịhịa gị.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe agaghị amalite |
|
|
| Mower na-egbutu n'ụzọ na-ezighi ezi |
|
|
| Oke ịma jijiji |
|
|
| Self-propulsion not engaging |
|
|
6. Nkọwapụta
Key technical details for the LEHMANN LGALM-2642 Lawn Mower.
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | LGALM-2642 |
| Ụdị Engine | 146 cm³ OHV Internal Combustion Engine |
| Ike Engine | 3.49 hp (2.6 kW) |
| Ogologo obosara | 42 cm |
| Ịcha mmezi ịdị elu | 5 levels (25 mm - 70 mm) |
| Ike akpa ahịhịa | 40 lita |
| Mpaghara ahịhịa akwadoro | Ihe ruru 2000 m² |
| Ụdị ọrụ | Self-Propelled (Automatic) |
| Ihe onwunwe | Alloy Steel |
| Ibu Ibu | 29 n'arọ |
| Akụkụ ngwaahịa (L x W x H) | Approx. 139 cm x 48 cm x 103 cm (assembled) |
7. Akwụkwọ ikike na nkwado
LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.
7.1 Nkwado ndị ahịa
If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN websaịtị maka nkọwa kọntaktị.
When contacting support, please have your model number (LGALM-2642) and purchase date available.
