Mopar 82212022AD Rear Molded Splash Guards with Dodge Logo Instruction Manual

1. Okwu mmalite

Thank you for choosing Mopar OEM Rear Molded Splash Guards. These high-quality, vehicle-specific parts are designed to protect your vehicle's paint and body from road debris, mud, and grime. Manufactured to meet precise specifications for fit, form, and function, these black splash guards come in a set of two and feature the iconic Dodge logo.

2. Ihe ngwugwu

• Two (2) Mopar 82212022AD Rear Molded Splash Guards (Black, with Dodge logo)

3. Ozi nchekwa

Always ensure your vehicle is parked on a level surface with the parking brake engaged before beginning any installation. If lifting the vehicle, use appropriate jack stands for support. Wear safety glasses and gloves to prevent injury. If you are unsure about any step of the installation process, consult a qualified mechanic.

4. Ntuziaka nwụnye

These Mopar OEM splash guards are designed for a direct fit on your specific vehicle. Installation typically involves securing the guards to existing points on the vehicle's rear fender wells. No drilling into the vehicle's body is usually required for OEM parts, as they utilize factory mounting locations.

1. Kwadebe ụgbọ ala: Park your vehicle on a flat, stable surface. Engage the parking brake. If necessary, lift the rear of the vehicle and support it with jack stands to allow easier access to the wheel wells.
2. Hichaa Mpaghara Nwụnye: Thoroughly clean the area where the splash guards will be installed, including the inner fender liner and the outer fender lip. Ensure it is free of dirt, mud, and debris. Allow the area to dry completely.
3. Position the Splash Guard: Hold one splash guard against the rear fender well, aligning it with the contours of the vehicle. Ensure the Dodge logo is correctly oriented.
4. Secure the Splash Guard: Using the appropriate fasteners (not explicitly listed in package contents, but typically included with OEM parts or utilize existing vehicle fasteners), secure the splash guard to the fender well. Start by hand-tightening all fasteners to ensure proper alignment, then fully tighten them. Do not overtighten.
5. Tinyegharịa maka akụkụ ọzọ: Repeat the process for the other rear splash guard.
6. Nyocha ikpeazụ: Once both splash guards are installed, visually inspect them to ensure they are securely attached and properly aligned.

Figure 1: Mopar 82212022AD Rear Molded Splash Guard installed on a vehicle.

Vidiyo ngwaahịa ngwaahịa

No official Mopar installation videos for the 82212022AD model were found in the provided data. For detailed visual guidance, it is recommended to consult your vehicle's specific service manual or seek assistance from a certified Mopar technician.

5. Ntuziaka ọrụ

Once properly installed, the Mopar Rear Molded Splash Guards operate passively, providing continuous protection against road debris. No active operation is required from the user.

6. Nlekọta

To maintain the appearance and effectiveness of your splash guards, regularly clean them with soap and water. Remove any accumulated mud or debris from the guards and the surrounding fender well area. Inspect the fasteners periodically to ensure they remain tight and secure.

7. Nchọpụta nsogbu

If you notice any looseness or unusual movement from the splash guards, check all mounting fasteners and tighten them as necessary. If a splash guard becomes damaged, it is recommended to replace it with a genuine Mopar OEM part to ensure continued protection and proper fitment.

8. Nkọwapụta

9. Akwụkwọ ikike Ozi

For specific warranty details regarding your Mopar 82212022AD Rear Molded Splash Guards, please refer to the warranty documentation provided with your purchase or contact Mopar customer service directly. Warranty terms may vary based on region and point of purchase.

10. Nkwado

If you require further assistance with installation, troubleshooting, or have questions about your Mopar product, please contact Mopar customer support or visit the official Mopar website for authorized service centers and additional resources.