Ntuziaka Onye Ọrụ Maka Ọkụ Ike DC nke MATRIX MPS-3010H-3C 3-Channel DC

1. Ngwaahịa gafereview

The MATRIX MPS-3010H-3C is a high-precision, 3-channel adjustable DC power supply designed for various applications including laboratory work, electronic repair, and DIY projects. It features two adjustable channels (CH1 and CH2) providing 0-30V / 0-10A each, and one fixed 5V / 3A channel (CH3), with a total power output of up to 615W. The unit offers a 4-digit bright screen display for voltage and current, independent control for CH1 and CH2, and supports 110V/220V input voltagna ịgbanye.

Key features include high precision (0.03% + 10 mV, 0.1% + 5 mA) and stability with 10 mV, 1 mA resolution and low ripple (2 mVrms, 5 mArms). It incorporates a power-on slow-start circuit for stable and accurate DC output. The power supply allows for easy switching between independent, series, and parallel modes with a single button, eliminating the need for manual wire reconnection. It also supports presetting current and voltage without short circuits. User-friendly features include precision encoder adjustment knobs for accurate value changes, OCP/OVP/OTP protection, an intelligent fan system, and USB, RS-232, and RS-485 interfaces for computer or automated device connectivity.

2. Ntuziaka nchekwa

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Jikọọ ọkụ eletrik ahụ na ebe a na-etinye ihe n'ala mgbe niile.
• Ejila ngwaọrụ arụ ọrụ na mmiri ma ọ bụ damp ọnọdụ.
• Gbaa mbọ hụ na ikuku ikuku dị mma iji gbochie ikpo oke ọkụ. Akwụsịla oghere ikuku.
• Emeghela casing of the power supply. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
• Nyochaa ntinye voltage selector (110V/220V) is set correctly for your region before connecting to AC power.
• Use only the provided power cord and test leads, or equivalent replacements that meet safety standards.
• Avoid touching output terminals when the device is powered on.
• Disconnect power before making or changing connections to the output terminals.

3. Ihe ngwugwu

Carefully unpack the power supply and check for any damage. Retain the packaging for future transport or storage. Verify that all items listed below are included:

• MATRIX MPS-3010H-3C DC Power Supply Unit
• Igwe ọkụ AC
• Nnwale Ndị Na-edu (Uhie na Oji)
• Akwụkwọ ntuziaka (akwụkwọ a)

4. Akụrụngwa Ngwaahịa

• 3-Mpụta ọwa: Two adjustable channels (0-30V/0-10A) and one fixed channel (5V/3A).
• High Precision & Resolution: 10mV / 1mA resolution with 0.03% + 10mV voltage accuracy and 0.1% + 5mA current accuracy.
• Low Ripple & Noise: ≤2mVrms and ≤5mArms for stable output.
• Ngosipụta ọnụọgụ 4: Clear and bright display for voltage na ọgụgụ dị ugbu a.
• Series/Parallel Mode: One-button switching for series or parallel operation without manual rewiring.
• Ọrụ atọrọ: Ability to preset current and voltage without short-circuiting the output.
• Usoro nchebe: Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP).
• Ọjụjụ Ọgụgụ Isi: Fan system adjusts speed based on temperature to maintain optimal performance.
• Njikọta: Equipped with USB, RS-232, and RS-485 interfaces for remote control and automation.
• Ọrụ ebe nchekwa: Saves output status and values before shutdown.
• Njikwa Buzzer: Buzzer sound can be turned on or off.

5. Ntuziaka Nhazi

5.1 Mwepu na ntinye

Remove the power supply from its packaging. Place the unit on a stable, level surface with adequate space around it for ventilation. Ensure that the front and rear panels are easily accessible.

5.2 Jikọọ ike AC

1. Locate the AC input socket and the AC selector switch on the rear panel of the power supply.
2. Ihe dị mkpa: Before connecting the power cord, ensure the AC selector switch is set to the correct voltage (110V or 220V) for your local power grid. Incorrect setting can damage the unit.
3. Connect the provided AC power cord to the AC input socket on the rear panel.
4. Plug the other end of the AC power cord into a grounded electrical outlet.

5.3 Connecting Load

Use the provided test leads to connect your load to the output terminals. Ensure correct polarity (red for positive, black for negative). For CH1 and CH2, use the corresponding output terminals. CH3 (fixed 5V) also has dedicated output terminals.

6. Ntuziaka ọrụ

6.1 Ogwe ihu n'ihuview

The front panel provides all necessary controls and displays for operating the power supply.

• CH1 V, A display: Digital displays for Voltage and Current of Channel 1.
• CH2 V, A display: Digital displays for Voltage and Current of Channel 2.
• CH1 Adjustment knob: Encoder knob for setting Voltage and Current for Channel 1. Push to switch between coarse/fine adjustment.
• CH2 Adjustment knob: Encoder knob for setting Voltage and Current for Channel 2. Push to switch between coarse/fine adjustment.
• Ngosipụta ụkpụrụ: Lights indicating CC (Constant Current) or CV (Constant Voltage) mode.
• NchNhr: Button for accessing menu options.
• CH1, CH2 Output switch: Buttons to enable/disable output for Channel 1 and Channel 2 independently.
• Ọnụ ahịa mmepụta: Binding posts for connecting test leads (Red for positive, Black for negative).
• Ike mgba ọkụ: Isi ihe mgba ọkụ/gbanyụọ ike maka nkeji ahụ.

6.2 Basic Operation (Independent Mode)

1. Ensure the power supply is connected to AC power and the AC selector is correct.
2. Pịa isi IKE switch to turn on the unit. The displays will illuminate.
3. For CH1 or CH2, rotate the respective VOLTAGE knob to set the desired output voltage. Push the knob to toggle between coarse and fine adjustment.
4. Rotate the respective UGBUA knob to set the desired current limit. This acts as a maximum current the channel will supply.
5. Connect your load to the corresponding output terminals (CH1, CH2, or CH3).
6. Pịa Mbupute 1 or Mbupute 2 switch to enable the output for the selected channel. The output indicator will light up.
7. The display will show the actual output voltage na ugbua.
8. To disable an output, press its respective Mpụta gbanwee ọzọ.

6.3 Series and Parallel Mode

The MPS-3010H-3C allows for easy configuration of CH1 and CH2 in series or parallel mode.

• Ụdị usoro: Connect the positive terminal of CH1 to the negative terminal of CH2 using a short wire. Then, use the negative terminal of CH1 and the positive terminal of CH2 as the combined output. Press the Usoro bọtịnụ. Mpịakọta ahụtage will be the sum of CH1 and CH2 voltages, while the current limit will be that of the lower-set channel.
• Ụdị Ndekota: Connect the positive terminals of CH1 and CH2 together, and the negative terminals of CH1 and CH2 together. Press the MKWUO button. The current will be the sum of CH1 and CH2 currents, while the voltage will be that of the lower-set channel.

In both series and parallel modes, the display will show the combined current and voltage values, providing intuitive readings.

6.4 Fixed 5V Output (CH3)

The CH3 output provides a fixed 5V at 3A. This channel is always active when the power supply is on and does not have independent ON/OFF control or adjustable settings.

6.5 Atụmatụ nchedo

• OCP (N'elu Nchedo Ugbu a): If the output current exceeds the set limit, the power supply will enter constant current mode (CC) or shut down the output, depending on the setting.
• OVP (N'elu Voltage Nchedo): Ọ bụrụ na mmepụta voltage exceeds a preset limit, the output will be shut down to protect the connected load.
• OTP (N'elu Nchekwa Okpomọkụ): The unit will automatically shut down if its internal temperature exceeds a safe operating limit.

7. Connectivity and Remote Control

The MPS-3010H-3C offers multiple interfaces for remote control and integration into automated systems.

7.1 Interface karịrịview

• Njikọ USB: For direct connection to a personal computer.
• Ngwa ngwa RS-232: A standard serial communication port.
• Ngwa ngwa RS-485: A robust serial communication standard suitable for longer distances and multi-drop networks.

7.2 Ijikọ na Kọmputa

To control the power supply remotely, connect the appropriate cable (USB, RS-232, or RS-485) from the power supply to your computer. You will need to install the necessary drivers and control software, typically available from the MATRIX product support website. Refer to the software documentation for detailed instructions on remote operation and programming.

8. Nlekọta

Mmezi kwesịrị ekwesị na-eme ka ọkụ eletrik gị dị ogologo ma nwee ike ịrụ ọrụ nke ọma.

• Nhicha: Disconnect the power supply from all power sources and loads before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Igwe ikuku: Regularly check that the ventilation openings on the sides and rear of the unit are clear of dust and obstructions.
• Nchekwa: When not in use for extended periods, store the power supply in a dry, dust-free environment.
• Nhazi For applications requiring high accuracy, periodic calibration by a qualified service center is recommended.

9. Nchọpụta nsogbu

Nkebi a na-eleba anya na nsogbu ndị ị na-enwekarị. Ọ bụrụ na nsogbu ahụ anọgide, kpọtụrụ ndị ọrụ nkwado ndị ahịa.

10. Nka na ụzụ nkọwa

The following table details the technical specifications of the MATRIX MPS-3010H-3C DC Power Supply.

11. Akwụkwọ ikike na nkwado ndị ahịa

MATRIX TECHNOLOGY INC. provides a 3-year after-sales service for all MATRIX-branded products. For technical assistance, warranty claims, or general inquiries, please contact MATRIX customer support through the official website or your point of purchase. Please have your model number (MPS-3010H-3C) and purchase date available when contacting support.