BlackZon Smyter 1/12 4WD Electric Desert Buggy - RTR - Green

Okwu mmalite

Welcome to the instruction manual for your new BlackZon Smyter 1/12 4WD Electric Desert Buggy. This Ready-to-Run (RTR) vehicle is designed for off-road excitement, featuring a robust 4WD shaft drivetrain, independent double wishbone suspension, and adjustable coilover shocks. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desert buggy. Please read this manual thoroughly before operating the vehicle.

Ozi nchekwa

• Always operate the vehicle in open areas away from people, pets, and obstacles.
• Do not operate near public roads, water, or in adverse weather conditions.
• Debe mkpịsị aka, ntutu, na uwe na-adịghị mma pụọ ​​na akụkụ ndị na-akpụ akpụ.
• Gbaa mbọ hụ na chajịla batrị nke ọma tupu ojiji ọ bụla.
• Disconnect the battery from the vehicle when not in use and during storage.
• Use only the provided charger and battery. Improper charging can lead to fire or injury.
• A na-atụ aro nlekọta ndị okenye maka ndị ọrụ na-erubeghị afọ 14.
• Ngwaahịa a nwere kemịkalụ mara steeti California na-ebute ọrịa kansa na ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ.

Ihe ngwugwu

Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

• BlackZon Smyter 1/12 4WD Electric Desert Buggy
• 2.4GHz Remote Control Transmitter
• Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
• Chaja USB
• Optional LED Light Set
• Akwụkwọ ntuziaka (akwụkwọ a)

Image: The BlackZon Smyter 1/12 4WD Electric Desert Buggy, ready for operation.

Melite

1. Ịchaji batrị ụgbọ ala

Before first use, fully charge the included Li-Ion 7.4V 1500mAh battery.

1. Connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
2. Connect the Li-Ion battery to the USB charger's T-Plug connector.
3. The charger's indicator light will show charging status (refer to charger's specific light indications).
4. Once charging is complete, disconnect the battery from the charger. Do not overcharge.

2. Installing the Vehicle Battery

Carefully install the charged battery into the vehicle's battery compartment.

1. Chọta ebe batrị dị na chassis ụgbọ ala.
2. Securely place the charged Li-Ion battery into the compartment.
3. Connect the battery's T-Plug connector to the vehicle's corresponding connector.
4. Ensure all wires are tucked away and do not interfere with moving parts.
5. Mechie mkpuchi nke batrị batrị nke ọma.

Foto: N'okpuru view of the Smyter chassis, showing the internal components and battery placement area.

3. Ịwụnye batrị njikwa anya

The 2.4GHz remote control transmitter requires batteries (not specified in JSON, assuming standard AA or AAA).

1. Mepee oghere batrị dị n'azụ nke njikwa anya.
2. Tinye batrị achọrọ, na-ahụ polarity ziri ezi (+/-).
3. Mechie mkpuchi oghere batrị.

Foto: N'ihu view of the 2.4GHz remote control transmitter for the Smyter buggy.

Foto: Top view of the remote control, showing the steering wheel and various controls.

4. Binding the Remote Control

The remote control and vehicle are typically pre-bound from the factory. If re-binding is necessary:

1. Ensure both the vehicle battery and remote control batteries are installed and charged.
2. Turn on the remote control transmitter first.
3. Then, turn on the vehicle's power switch.
4. The indicator lights on both the transmitter and vehicle receiver should become solid, indicating a successful bind. If not, refer to the troubleshooting section or specific binding instructions on the remote control itself (often a small button).

Ịrụ ụgbọ ala

Njikwa ntọala

• Ụgbọ ala: Rotate the wheel left or right to steer the vehicle.
• Mkpalite trotul:
  • Pull the trigger towards you to accelerate forward.
  • Push the trigger away from you to brake, and push again for reverse.
• Mgbanwe Ọsọ: The 2.4GHz transmitter includes a Speed Switch dial. Turn this dial to adjust the maximum speed of the vehicle. This is useful for new users or for operating in confined spaces.
• Trim Adjustments: The remote control may have trim dials for steering and throttle. Use these to fine-tune the vehicle's straight-line tracking and neutral throttle position if needed.

Ndụmọdụ ịkwọ ụgbọala

• Malite nwayọ nwayọ iji nweta mmetụta maka njikwa ndị ahụ.
• Practice steering and throttle control in an open area.
• Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
• The Smyter is designed for off-road use. Enjoy its capabilities on dirt, gravel, and grass.
• Utilize the illuminated roof light bar for low-light conditions, and consider installing the bonus optional LED light set for enhanced visibility.

Nlekọta

Regular maintenance will extend the life and performance of your BlackZon Smyter.

Nhicha

• After each use, especially in dirty or dusty conditions, clean the vehicle.
• Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and wheels.
• Jiri mgbasa ozi hichaa ahụ gịamp akwa . Zere iji kemịkalụ siri ike.
• While the electronics are splashproof, avoid submerging the vehicle in water.

Nchekwa

• Always disconnect the battery from the vehicle before storage.
• Store the vehicle and remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove batteries from the remote control if storing for extended periods.

Nyocha akụrụngwa

• Ngwa ngwa: Periodically inspect the spur gear and pinion gear for wear or debris. The gear cover helps keep debris away.
• Nkwusioru: Check the adjustable coilover shocks and independent double wishbone suspension for any damage or excessive play.
• Ndịiche: The 4-Gear differentials (front & rear) are robust, but occasional inspection for smooth operation is recommended.
• Agba: The vehicle features a complete set of ball bearings. Ensure they spin freely and are not seized by dirt.
• Nduzi: Verify the dual point bell crank steering system and servo saver are functioning correctly.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

For warranty information, technical support, or replacement parts, please contact BlackZon customer service. Refer to the product packaging or the official BlackZon websaịtị maka nkọwa kọntaktị kachasị ugbu a.

Protection plans may be available for purchase separately to extend coverage beyond the manufacturer's warranty. Please check with your retailer for details on available protection plans.