Bebesit Deluxe 360 Travel System Stroller and Car Seat Instruction Manual

1. Okwu mmalite

Thank you for choosing the Bebesit Deluxe 360 Travel System. This comprehensive system includes a versatile stroller and a compatible infant car seat with its base, designed to provide safety, comfort, and convenience for your child from newborn up to approximately 3 years of age (or 18 kg for the stroller, 12 kg for the car seat). This manual provides essential instructions for assembly, operation, maintenance, and safety to ensure proper use of your product.

Image 1.1: Bebesit Deluxe 360 Travel System (Stroller, Car Seat, and Base)

2. Ozi nchekwa

Always prioritize your child's safety. Read and understand all warnings and instructions before using the Bebesit Deluxe 360 Travel System. Failure to follow these instructions could result in serious injury or death.

• Always use the safety harness: The stroller is equipped with a 5-point safety harness, and the car seat with a 3-point harness. Always secure your child properly.
• Never leave child unattended: Do not leave your child unsupervised in the stroller or car seat.
• Check weight limits: Adhere to the maximum weight recommendations: 18 kg for the stroller and 12 kg for the car seat.
• Engage brakes: Always engage the stroller brakes when stationary.
• Zenarị ibu ibu: Do not place more than 3 kg in the storage basket. Overloading can cause instability.
• Proper car seat installation: Ensure the car seat is correctly installed in your vehicle using the provided base and your vehicle's seat belts, following both this manual and your vehicle's owner's manual.
• Asambodo ogo: This product is certified by NTEC23PI0603177, meeting high safety and quality standards.

Image 2.1: Stroller 5-Point Safety Harness with Protective Pads

3. Ntọala na Mgbakọ

Mgbakọ stroller 3.1

1. Mepee Frame Stroller: Release the folding latch and carefully unfold the stroller frame until it locks into place. Ensure all locking mechanisms are engaged.
2. Tinye wiilị: Insert the front and rear wheels into their respective slots until they click securely.
3. Install Seat Unit: The seat unit can be installed facing forward or backward. Align the connectors on the seat unit with the frame and push down until it clicks.
4. Adjust Handlebar: Press the buttons on the sides of the handlebar to adjust it to your desired height.
5. Jikọọ Canopy: Secure the canopy to the seat unit.

Image 3.1: Stroller Components and Features

3.2 Car Seat and Base Installation

1. Install Car Seat Base: Place the car seat base on your vehicle's back seat. Route the vehicle's lap and shoulder belt through the designated belt paths on the base. Pull the belt tight to remove slack and ensure the base is securely installed with minimal movement (less than 1 inch side-to-side or front-to-back).
2. Attach Infant Car Seat to Base: Place the infant car seat onto the installed base. Push down firmly until you hear a click, indicating it is securely latched. Always check for a secure connection by pulling up on the car seat.
3. Attach Infant Car Seat to Stroller Frame: To use the car seat with the stroller, remove the stroller's main seat unit. Align the car seat with the stroller frame's connectors and click it into place. Ensure it is securely attached before use.

Image 3.2: Infant Car Seat with 3-Point Harness and Base

Image 3.3: 3-in-1 Travel System Configurations

4. Ntuziaka ọrụ

4.1 Stroller Operation

• Na-anọdụ ala oche: The stroller seat can be reclined to multiple positions, including a flat bassinet-like mode for newborns. Use the recline mechanism located at the back of the seat to adjust.
• Ntugharị ogo 360: The seat unit can be rotated 360 degrees on the frame, allowing your child to face you or face forward. Ensure the seat is securely locked in the desired direction before moving.
• breeki: Engage the central safety brake on the rear wheels by pressing down on the pedal. For additional security, locking brakes are available on the front wheels. Always engage brakes when the stroller is stationary.
• Mgbanwe nke Kandụl: The 3-panel canopy with visor can be adjusted to provide optimal sun protection.
• Na-atụgharị Stroller: To fold the stroller, ensure the seat is in the forward-facing position and fully upright. Engage the folding mechanism (refer to specific instructions on the frame) and collapse the stroller until it latches.

Image 4.1: Stroller Seat Recline and Bassinet Mode

Image 4.2: Folded Stroller Dimensions

4.2 Car Seat Operation

• Ịchekwa nwa gị: Place your child in the car seat and fasten the 3-point harness. Adjust the harness straps to be snug against your child's body, ensuring no more than two fingers can fit between the strap and your child's collarbone.
• Aka na-ebu: The car seat features an adjustable carrying handle. Ensure it is locked in the upright position when carrying and in the appropriate position when installed in the vehicle (refer to car seat labels).

5. Nlekọta

• Ákwà nhicha: The fabric components can be spot cleaned with a mild soap and damp cloth. Refer to care labels for specific washing instructions. Do not use harsh detergents or bleach.
• Frame nhicha: Jiri mgbasa ozi hichaa etiti aluminom ahụamp akwa na ncha dị nro. Kpọọ nke ọma.
• Nlekọta wheel: Regularly check wheels for debris and clean as needed. Lubricate moving parts with a silicone-based lubricant if they become stiff.
• Nchekwa: Store the travel system in a dry, cool place away from direct sunlight when not in use.
• Nlele anya mgbe niile: Periodically inspect all parts for wear, damage, or loose fasteners. Discontinue use if any part is damaged.

6. Nchọpụta nsogbu

• Stroller anaghị ekpughe/mpịaji nke ọma: Ensure all locking mechanisms are disengaged before unfolding/folding. Check for any obstructions in the folding mechanism.
• Ịkpọ mkpu ma ọ bụ sie ike wiil: Clean wheels of any dirt or debris. Apply a small amount of silicone lubricant to the wheel axles.
• Car seat not clicking into base/stroller: Ensure the car seat is correctly aligned with the connectors. Push down firmly until a click is heard. Check for any obstructions.
• Ihe siri ike ịgbanwe: Ensure straps are not twisted. Press the harness release button (if applicable) before attempting to loosen or tighten.

7. Nkọwapụta

Image 7.1: Unfolded Stroller Dimensions

8. Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation included with your purchase or contact Bebesit customer service. Keep your proof of purchase for any warranty claims.

For further assistance, troubleshooting, or to inquire about replacement parts, please visit the official Bebesit store or contact their customer support directly.

Bebesit Official Store: Visit Bebesit on Amazon