Ngwaahịa gafereview
The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.
Image: The Stealth JHT100 tower heater in a room setting, showcasing ya sleek imewe.
Ozi nchekwa
Your safety is paramount. Please read and understand all safety instructions before operating this appliance.
- Nchedo ndụmọdụ: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
- Nchekwa oke ọkụ: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
- V0 Flame Retardant Materials: Constructed with V0 flame retardant materials for enhanced safety.
- Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
- Always ensure the heater is placed on a firm, level surface.
- Do not cover the heater or block its air inlets/outlets.
- Debe ihe ndị nwere ike ire ọkụ ma ọ dịkarịa ala mita 0.9 site na ihe na-ekpo ọkụ.
- Do not use in wet or moist locations.
Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.
Ihe ngwugwu
Mgbe ebupuchara, biko hụ na ihe niile edepụtara n'okpuru nọ na enweghị mmebi:
- Stealth JHT100 Tower Heater Unit
- Detachable Base (2 halves)
- Mounting Screws for Base
- Remote Control (with pre-installed battery and plastic tab)
- Akwụkwọ ntuziaka
Melite
- Mgbakọ ntọala:
Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.
Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.
- Ntọala njikwa anya:
The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.
- Njikọ ike:
Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.
Ntuziaka ọrụ
The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.
Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.
1. Gbanyụọ / gbanyụọ
- Isi Ike Gbanye: Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
- Unit Power Button: Pịa bọtịnụ ike (
) na panel njikwa ma ọ bụ remote iji gbanye ma ọ bụ gbanyụọ ihe na-ekpo ọkụ.
2. Heat Modes
The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.
- Pịa bọtịnụ ọnọdụ (
) to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).
Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).
3. Oscillation
Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.
- Pịa bọtịnụ oscillation (
) to start or stop the oscillation function.
Foto: N'elu view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.
4. Ọrụ ngụ oge
Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.
- Pịa bọtịnụ ngụ oge (
) repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H). - To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.
Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.
5. Remote Control
The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.
Nlekọta
Nlekọta oge niile na-eme ka arụmọrụ dị mma na ogologo ndụ nke ikpo ọkụ gị.
- Na-ehicha ihe nzacha ikuku: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
- Nchacha mpụta: Jiri ihe dị nro hichaa mpụta nke ihe na-ekpo ọkụ ahụ, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
- Always unplug the heater from the power outlet before performing any cleaning or maintenance.
Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.
Nchọpụta nsogbu
If your heater is not functioning as expected, please consult the following common issues and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ọkụ anaghị agbanye. |
|
|
| Igwe ọkụ na-agbanyụ na mberede. |
|
|
| Mmepụta okpomọkụ dị ala. |
|
|
Nkọwapụta
- Akara: Stealth
- Nọmba nlereanya: JHT100
- Ihe kpatara ụdị: Ụlọ elu
- Mmepụta ọkụ: 1500 Watt
- Ampafọ: 12.5 Amps
- Akụkụ ngwaahịa: 8 x 11 x 32 sentimita asatọ
- Ibu ihe: 10.58 pound
- Isi mmalite ike: Igwe ọkụ eletrik
- Ụzọ kpo oku: Convection, Forced Air
- Mgbanwe: 70° Wide Oscillation
- Ngụ oge: 1-6 Awa
- Atụmatụ nchekwa: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug
Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.
Akwụkwọ ikike na nkwado
Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.
The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.
If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.
For support, please refer to the contact information provided on your warranty card or visit the official Stealth websaịtị.
