Ngwaahịa gafereview
This manual provides essential information for the installation, operation, and maintenance of the Okin Model JLDQ-12 & JLDQ.12.157.333K Power Recliner Motor. This motor is designed as a replacement part for electric sofa lift chairs.
Figure 1: Okin JLDQ.12.157.333K Power Recliner Motor assembly.
The Okin JLDQ.12.157.333K is an original Okin JLDQ motor. It is suitable for replacing the JLDQ.12.157.333K model and can also serve as a replacement for JLDQ.12.157.333E/F/G/H/K/L/P/U/V/W/X/Z series motors, with minor differences that do not affect functionality.
Ozi nchekwa
Always prioritize safety when handling and installing electrical components. Read and understand all instructions before proceeding.
- Before attempting any replacement or repair, ensure the power supply to the recliner chair is disconnected.
- Verify the motor brand and model number on your existing motor matches the replacement part (JLDQ.12.157.333K or compatible series).
- Troubleshoot the switch and power supply unit first if the recliner is not functioning, before assuming the motor is faulty.
- Ensure the replacement motor's minimum install dimension, stroke, and plugs are compatible with your recliner's frame.
- Follow all safety instructions provided with your specific recliner chair.
- Maka naanị ime ụlọ.
Nkọwapụta ngwaahịa
The following table details the technical specifications of the Okin JLDQ.12.157.333K Power Recliner Motor:
| Nkọwapụta | Nkọwa |
|---|---|
| Nlereanya | JLDQ.12.157.333K |
| Load (Push/Pull Force) | 750N |
| Ọrịa strok | 333 mm (moves with slide block) |
| Minimum Installation Size (Shrink) | 157 mm |
| Maximum Installation Size | 490 mm |
| Ugboro ọrụ | On 1 min / Off 8 min |
| Ọdịdị | Black (PA), Silver White (Aluminum) |
| Ibu Ibu | 4.84 pound |
| Akụkụ ngwaahịa | 17.7 x 4 x 3 sentimita asatọ |
Ọgụgụ 2: nso nso view of the motor's identification label, displaying model JLDQ.12.157.333K and serial number Q22075291 00049.
Ihe ngwugwu
Ngwungwu ahụ gụnyere ihe ndị a:
- 1 x Okin Refined Power Recliner Motor (Model JLDQ.12.157.333K)
The actuator motor set consists of the motor unit and three distinct connectors:
- A 5-pin round plug for the switch hand control.
- A 2-pin square plug with a clip for the power supply connection.
- A 2-pin socket for connecting a slaved motor (if applicable).
Ọgụgụ 3: Zuru ezu view of the motor's connectors, including the 2-pin square plug for power, the 5-pin round plug for hand control, and the 2-pin socket for a slaved motor.
Nwụnye (Nhazi)
Replacing the Okin recliner motor is a straightforward process. Follow these steps carefully:
- Kwụpụ ike: Before beginning, unplug the recliner chair from the wall outlet to prevent electrical shock.
- Nweta moto: Carefully tilt the recliner chair onto its side or back to expose the existing motor and frame.
- Chọpụta njikọ: Note how the existing motor is connected to the hand control, power supply, and the recliner frame. Take photos if necessary for reference.
- Wepu moto ochie: Unscrew and detach the old motor from the recliner frame. Disconnect all plugs (hand control, power, and any slaved motor connections).
- Wụnye moto ọhụrụ: Position the new Okin JLDQ.12.157.333K motor in the same location as the old one. Secure it to the recliner frame using the appropriate screws. The installation is typically easy, often involving 6 screws of the same size.
- Connect Plugs: Connect the 5-pin round plug to the hand control, the 2-pin square plug with clip to the power supply, and the 2-pin socket to any slaved motor if your chair uses one. Ensure all connections are secure.
- Ọrụ nnwale: Once the motor is securely installed and all connections are made, carefully return the recliner to its upright position. Plug the chair back into the wall outlet and test the recliner's functions using the hand control.
Figure 4: Visual representation of the motor's features and how it integrates into a recliner chair.
Ọrụ
The Okin JLDQ.12.157.333K motor operates in conjunction with your recliner's existing hand control. Once installed and powered, the motor will respond to commands from the hand control to extend or retract the recliner mechanism.
- Use the hand control buttons to initiate the reclining or lifting motion.
- The motor has an operation frequency of "On 1 min / Off 8 min". This means it is designed for intermittent use. Avoid continuous operation for more than 1 minute to prevent overheating and ensure longevity. Allow the motor to rest for at least 8 minutes after 1 minute of continuous use.
- The motor provides a push and pull force of 750N, enabling smooth and reliable movement of the recliner mechanism.
Nlekọta
The Okin JLDQ.12.157.333K power recliner motor is designed for durability and requires minimal maintenance. However, periodic checks can help ensure its optimal performance and extend its lifespan.
- Debe Ọcha: Ensure the motor and its moving parts are free from dust, debris, and obstructions. Use a dry cloth to wipe down the exterior.
- Lelee njikọ: Periodically inspect all electrical connections (power, hand control, slaved motor) to ensure they are secure and free from damage.
- mmanu mmanu: The motor is generally self-lubricating. Do not apply additional lubricants unless specifically instructed by the manufacturer or a qualified technician.
- Zenarị ibu ibu: Do not exceed the maximum weight recommendation of your recliner chair, as this can strain the motor.
Nchọpụta nsogbu
If your recliner chair is not functioning correctly after motor replacement, or if you experience issues, consider the following troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Recliner anaghị agagharị. | No power to the chair. | Ensure the power cord is securely plugged into the wall outlet and the power supply unit. Check the circuit breaker. |
| Motor makes noise but recliner doesn't move. | Motor or mechanism obstruction. | Inspect the area around the motor and reclining mechanism for any obstructions (e.g., loose fabric, foreign objects). Remove them carefully. |
| Hand control not responding. | Loose or faulty hand control connection. | Check the 5-pin round plug connection from the hand control to the motor. Ensure it is fully inserted and secure. Test the hand control itself if possible. |
| Motor stops after short operation. | Overheating due to continuous use. | Allow the motor to cool down for at least 8 minutes. Adhere to the "On 1 min / Off 8 min" operation frequency. |
| Motor is not compatible. | Incorrect model or dimensions. | Double-check the model number on your old motor against the JLDQ.12.157.333K. Verify the stroke and installation dimensions are suitable for your recliner frame. |
If these steps do not resolve the issue, contact Okin customer support or a qualified technician.
Akwụkwọ ikike na nkwado
For information regarding warranty coverage for your Okin JLDQ.12.157.333K Power Recliner Motor, please refer to the warranty documentation provided with your purchase or visit the official Okin websaịtị.
For technical support, replacement parts, or further assistance, please contact Okin customer service. You can find contact information on the Okin brand store page or through their official websaịtị.
Gaa leta Okin Store on Amazon maka ngwaahịa na ozi ndị ọzọ.
