Okwu mmalite
Thank you for choosing the Long Run Technologies Stereo Bluetooth Speakers. These speakers are designed to provide a superior audio experience with advanced wireless technology, allowing seamless connection to various Bluetooth-enabled devices. Their compact size, robust construction, and versatile connectivity options make them ideal for both indoor and outdoor use. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity.
Ozi nchekwa
- Ekwela ka ndị na-ekwu okwu nọrọ n'ọnọdụ okpomọkụ dị oke elu, iru mmiri dị elu, ma ọ bụ anwụ kpọmkwem.
- Avoid dropping or subjecting the speakers to strong impacts, despite their shockproof construction.
- Keep the speakers away from water or other liquids. While water-resistant, they are not waterproof and should not be submerged.
- Do not attempt to disassemble, repair, or modify the speakers. This will void the warranty and may cause damage or injury.
- Use only the provided charging cables and power sources recommended by the manufacturer.
- Ensure proper ventilation when charging or operating the speakers.
- Avoid playing audio at excessively high volumes for prolonged periods to prevent hearing damage.
Ihe ngwugwu
Biko chọpụta na agụnyere ihe niile edepụtara n'okpuru na ngwugwu gị:
- 2 x Long Run Technologies Stereo Bluetooth Speakers
- 2 x Rubber Stands
- 2 x USB-C eriri USB
- 2 x 3.5mm Aux Cables
- Akwụkwọ ntuziaka
Ngwaahịa gafereview
The Long Run Technologies Stereo Bluetooth Speakers feature a sleek, modern design with intuitive controls and multiple connectivity options. Each speaker is approximately 3 inches tall and comes with a rubber stand for stable placement.
Ngwa okwu
- Grille ọkà okwu: Front-facing audio output.
- Control Panel (Rear): Contains power button, volume controls, and mode selection.
- Nchaji ọdụ ụgbọ mmiri (USB-C): Maka ijikọ eriri nchaji.
- TF/SD Card Slot: For direct audio playback from a memory card.
- Ntinye ọdịyo 3.5mm: For wired connection to devices.
- Rubber Stand: Provides stability and slight upward angle for optimal sound projection.
Melite
Ịchaji ndị ọkà okwu
Before first use, fully charge both speakers. A full charge provides approximately 10 hours of playtime.
- Connect the provided USB-C charging cable to the charging port on the back of each speaker.
- Jikọọ nsọtụ nke ọzọ nke eriri USB-C na ihe nkwụnye ike USB dakọtara (anaghị etinye ya) ma ọ bụ ọdụ USB kọmputa.
- The charging indicator light will illuminate during charging and turn off when fully charged. Charging typically takes about 2 hours.
Initial Bluetooth Pairing (Single Speaker)
- Gbaa mbọ hụ na agbadoro ọkà okwu.
- Press and hold the power button on the back of the speaker until you hear an audio prompt indicating it's in pairing mode.
- On your Bluetooth-enabled device (phone, laptop, tablet), go to Bluetooth settings and search for available devices.
- Select "BS-05" or similar from the list to connect. You will hear a confirmation tone once paired.
Na-arụ ọrụ ndị ọkà okwu
Njikwa ntọala
- Gbanyụọ/ Gbanyụọ: Pịa ma jide bọtịnụ ike.
- Elu elu/ala: Use the '+' and '-' buttons on the speaker's control panel, or adjust directly from your connected device.
- Gwuo/kwụsịtụ: Press the 'Phone/Play/Pause' button.
- Next / Gara aga Track: Pịa bọtịnụ '+' ma ọ bụ '-' ogologo.
Multi-Speaker Pairing (True Stereo & Surround Sound)
These speakers support pairing an unlimited number of units for an immersive sound experience. For true stereo sound with two speakers, follow these steps:
- Connect a single speaker to your Bluetooth device first (as per "Initial Bluetooth Pairing" above). This will be your primary speaker.
- Gbanwuo ọkà okwu nke abụọ.
- On the second speaker, long press the "Phone/Play/Pause" button until you hear an audio prompt indicating that it has joined the primary speaker.
- To add additional speakers for multi-room or surround sound, turn them on and repeat step 3 for each additional speaker.
Ụdị njikọ
Your speakers offer three versatile modes of usability:
- Stereo Bluetooth Mode: Connect wirelessly to any Bluetooth-enabled device (phones, laptops, PCs, Macbooks, tablets, TVs).
- TF/SD Card Slot: Insert a TF/SD card with your music files for direct playback without a Bluetooth device.
- Igwe ọdịyo 3.5mm: Use the included 3.5mm audio cable to connect to devices without Bluetooth capabilities.
Oku na-enweghị aka
The speakers feature a built-in microphone for hands-free calling when connected via Bluetooth to your smartphone.
- Azịza/Kwụsị Oku: Press the 'Phone/Play/Pause' button.
- Jụ oku: Long press the 'Phone/Play/Pause' button.
Nlekọta
Proper care and maintenance will extend the life of your speakers.
- Nhicha: Use a soft, dry cloth to wipe the surface of the speakers. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Nchekwa: Mgbe a naghị eji ya ogologo oge, chekwaa ndị ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
- Nlekọta batrị: To maintain battery health, avoid fully discharging the battery frequently. Recharge the speakers regularly, even if not in constant use.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ọkà okwu anaghị agba ọkụ. | Batrị dị ala; Enweghi bọtịnụ ike zuru oke. | Chajie ọkà okwu zuru ezu. Pịa ma jide bọtịnụ ike maka 3-5 sekọnd. |
| Enweghị ike ijikọ na ngwaọrụ Bluetooth. | Speaker not in pairing mode; Bluetooth is off on device; Device too far; Interference. | Ensure speaker is in pairing mode. Turn Bluetooth on/off on your device. Move device closer to speaker (within 33ft). Reduce other wireless interference. |
| Enweghị ụda ma ọ bụ obere olu. | Olu dị ala nke ukwuu na ọkà okwu ma ọ bụ ngwaọrụ; Ụdị ntinye ezighi ezi; ejikọtaghị ọkà okwu. | Increase volume on both speaker and connected device. Ensure correct mode (Bluetooth, Aux, SD). Re-pair Bluetooth or check cable connection. |
| Multi-speaker pairing issues. | Incorrect pairing sequence; Interference. | Ensure primary speaker is connected first. Long press the 'Phone/Play/Pause' button on secondary speakers until they join. Minimize other Bluetooth devices nearby. |
| Sound quality is poor (chattering/stuttering). | Wireless interference; Device too far. | Ensure speakers are in an environment free from other potential interfering wireless devices. Move closer to the connected device. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | Mmakọ Ọkà Okwu Ikuku |
| Nọmba nlereanya | LRT 879 |
| Ụdị | Long Run Teknụzụ |
| Ihe onwunwe | Aircraft Grade Steel |
| Ụdị Ọkà Okwu | Akwa akwụkwọ |
| Nha Ọkà Okwu | 3 sentimita asatọ |
| Ike Nwepu kacha elu | 10 Watt |
| Ọnọdụ mmepụta ọdịyo | Stereo |
| Teknụzụ Njikọta | Bluetooth, inyeaka |
| Teknụzụ nzikọrịta ozi ikuku | Bluetooth |
| Oke Bluetooth | 30 ụkwụ |
| Isi Iyi Ike | Akwanyere batrị |
| Ndụ batrị | Awa 10 |
| Oge Nchaji | Awa 2 |
| Akụkụ ngwaahịa | 3"D x 3"W x 1"H |
| Ibu Ibu | 2 Pound (kwa otu ụzọ) |
| Ọkwa Nguzogide mmiri | Mmiri na-eguzogide |
| Ngwa gụnyere | Wuru n'ime Amplifier, Built-in Lithium Ion Battery |
Akwụkwọ ikike na nkwado
Long Run Technologies products are backed by a limited warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official Long Run Technologies website. If you encounter any issues or require technical assistance, please contact Long Run Technologies customer support through their official channels. Contact information can typically be found on the product packaging or the brand's websaịtị.
