1. Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sunco 6 Inch LED Recessed Light with Night Light. This product features selectable color temperatures (CCT), dimmable functionality, and an integrated night light feature, designed for various indoor applications. Please read this manual thoroughly before installation and retain it for future reference.
2. Ozi nchekwa
Ịdọ aka ná ntị: Risk of fire or electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Gbanyụọ ike na ihe na-agbaji sekit tupu agbanye ma ọ bụ rụzie ọrụ.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
- Emela ka ihe ọ bụla dị na ihe ahụ gbanwee, agbanwee, ma ọ bụ wepụ ihe ọ bụla dị na ihe ahụ.
- Do not install in wet locations. This product is rated for indoor use only.
- Gbaa mbọ hụ na ọkọnọ voltage bụ 120V AC.
- This fixture is IC-rated, suitable for direct contact with insulation.
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- 6 Inch LED Recessed Light Fixture (4 units)
- Junction Box (4 units)
- Constant Current Driver (integrated)
Image: Four Sunco 6 Inch LED Recessed Lights, each connected to its individual junction box, illustrating the complete package contents.
4. Akụrụngwa Ngwaahịa
- CCT nwere ike ịhọrọ: Choose from 5 color temperatures (2700K, 3000K, 4000K, 5000K, 6000K) using a switch on the junction box.
- Njirimara ìhè abalị: Activate a soft 2700K night light by flipping the light switch twice.
- Enwere ike ibelata: Both the main downlight and night light are dimmable from 10% to 100%.
- Nwụnye dị mfe: Designed for quick setup in single drywall, double drywall, or soffit with spring-loaded brackets. IC-rated for safe use with insulation.
- Ịrụ ọrụ dị elu: 1500 Lumens output with 15W power consumption (100 lumens per watt).
- Ihe owuwu na-adịgide adịgide: Features durable aluminum housing, high-efficiency LEDs, and an anti-yellowing lens.
Foto: gbawara view diagram highlighting key components such as durable aluminum housing, high-efficiency LEDs, low-brightness night light, anti-yellowing lens, and easy-install clips.
5. Ntọala na nwụnye
Refer to the provided Installation Manual (PDF) for detailed diagrams and safety precautions. A link to the PDF is available on the product page.
Ngwa achọrọ (anaghị etinye ya):
- Hole saw (approximately 6.25 inches for 6-inch light)
- Waya waya
- Screwdriver
- Ugogbe nchekwa na uwe aka
Nzọụkwụ nwụnye:
- Gbanyụọ ike: Tupu ịmalite, hụ na agbanyụrụ ọkụ eletrik na mpaghara nrụnye na ihe mgbawa sekit ahụ.
- Mpempe oghere: Use a hole saw to cut a circular opening in the ceiling. For the 6-inch fixture, a 6.25-inch diameter hole is recommended.
- Open Junction Box: Open the cover of the provided junction box. Remove the appropriate knockout(s) for your wiring.
- Select CCT: Locate the CCT (Color Correlated Temperature) selector switch inside the junction box. Choose your desired color temperature (2700K, 3000K, 4000K, 5000K, or 6000K) before wiring.
- Jikọọ Wiring: Connect the house wiring (live, neutral, ground) to the corresponding wires inside the junction box using wire nuts. Ensure all connections are secure.
- Igbe Nkwekọrịta echedoro: Place the junction box into the ceiling opening.
- Jikọọ ọkụ eletrik: Connect the male connector from the light fixture to the female connector extending from the junction box. Ensure a tight connection.
- Ìhè Ugwu: Push the spring-loaded clips on the light fixture upwards and insert the fixture into the ceiling opening. The clips will secure the fixture in place.
- Weghachi ike: Gbanyụọ ọkụ azụ na ihe nbibi sekit.
Image: An illustration demonstrating the easy installation process, including connecting wiring to the junction box, connecting the light, and mounting the light into a cut hole in the ceiling. Details show adjustable clips, energy-saving LED, and anti-yellowing lens.
6. Ntuziaka ọrụ
6.1. Color Temperature (CCT) Selection
The desired color temperature (2700K, 3000K, 4000K, 5000K, or 6000K) is selected via a switch located inside the junction box. This selection should be made prior to final installation of the junction box into the ceiling. Once set, the light will operate at the chosen CCT for its main illumination.
Image: A visual representation of five different color temperatures (Soft White 2700K, Warm White 3000K, Cool White 4000K, Daylight 5000K, Clear White 6000K) as they appear in a room, along with a slider indicating the 1500lm downlight with selectable color temperature from 2700K to 6000K and dimmable range of 10%-100%.
6.2. Night Light Feature
To activate the 2700K night light mode, simply flip your standard wall light switch OFF and then ON again within a short interval (typically 1-2 seconds). The light will switch from its main illumination to the soft 2700K night light. To return to the main illumination, repeat the OFF/ON sequence.
Image: A split image demonstrating the difference between the bright 1500 lumens downlight with a 90-degree beam angle and the cozy 2000K nightlight, which is activated by an easy On/Off/On switch sequence. Below, a sequence of wall switch positions (On, Off, On) illustrates how to activate the nightlight.
6.3. Ọrụ Mbelata
Both the main downlight and the night light feature are dimmable from 10% to 100% when connected to a compatible dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.
Image: A three-panel image illustrating the dimming capabilities of the lights, showing 100% brightness, 50% brightness, and the nightlight mode. Below, it states that the lights are 10-100% dimmable and compatible with most dimmers, showing three different dimmer switch types.
7. Nlekọta
The Sunco LED Recessed Light is designed for long-term, maintenance-free operation. No user-serviceable parts are inside.
- Nhicha: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp akwa . Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.
- Ndokwa bọlbụ: The LED light source is integrated and not replaceable. The fixture has an average life of 50,000 hours.
8. Nchọpụta nsogbu
If you experience issues with your recessed light, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | No power supply; Loose wiring; Faulty fixture. | Check circuit breaker. Verify all wiring connections are secure. Test with a known working fixture if possible. |
| Mkpọtụ ọkụ ma ọ bụ mkpọtụ na-enwu enwu. | Switch dimmer na-ekwekọghị; Waya siri ike. | Ensure dimmer is LED compatible. Check wiring connections. |
| Night light does not activate consistently. | Incorrect switch timing; Multiple lights on one switch. | Ensure a quick OFF/ON sequence. If multiple lights are on one switch, some may require a longer OFF period (5-10 seconds) to reset before attempting the sequence. |
| Light is too hot. | Normal operation (some heat is expected); Improper installation. | While some heat is normal, ensure proper air circulation around the fixture. Verify IC-rating compliance. If excessively hot, discontinue use and contact support. |
9. Nkọwapụta
| Nkọwapụta | Nkọwa |
|---|---|
| Aha Nlereanya | DL_SL6_NL-WH-2750K-4PK |
| Nha | 6 inch |
| Wattage | 15W (150W dakọtara) |
| Icha ọkụ | 1500 Lumen |
| Ịrụ ọrụ | 100 lumen kwa watt |
| Okpomọkụ agba (CCT) | Selectable: 2700K, 3000K, 4000K, 5000K, 6000K |
| Night Light CCT | 2700K |
| Dimmable Range | 10% - 100% |
| Voltage | 120 volts |
| Ihe onwunwe | Aluminom |
| Nkezi Ndụ | Awa 50,000 |
| Ndekọ ngosi agba (CRI) | 90.00 |
| Ụdị nwụnye | Flush Mount, Recessed Mount |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Asambodo | FC, ETL, RoHS |
Image: A diagram illustrating the product dimensions (7"L x 1"W x 7"H, 7.3" wire, 2.9" x 3.4" junction box) and certifications (FC, ETL, RoHS) for quality and safety.
10. Akwụkwọ ikike na nkwado
Sunco Lighting na-enye ọrụ Nchekwa afọ 7 for this product. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact Sunco Lighting customer service.
For additional resources, including the full Installation Manual and User Guide, please visit the Sunco Lighting website or refer to the product page where this item was purchased.
Image: An image highlighting the product's 45-year lifespan and 7-year protection, featuring a customer support team, emphasizing reliable customer service.
