Ntuziaka Onye Ọrụ TTEC Dynamite Duo Portable Wireless Bluetooth Speaker

1. Okwu mmalite

Thank you for choosing the TTEC Dynamite Duo Portable Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and longevity of your device.

The TTEC Dynamite Duo offers a 360-degree wireless sound experience, featuring dual passive radiators and dual active drivers for rich audio. With Bluetooth 5.0 connectivity, up to 12 hours of battery life, and an IP65 certified water and dust resistant design, it is built for versatile use. It also includes a built-in microphone for hands-free calls and supports True Wireless Stereo (TWS) pairing for an enhanced audio experience.

2. Ozi nchekwa

• Ekwela ka onye na-ekwu okwu nọrọ n'ọnọdụ okpomọkụ dị oke elu, anwụ kpọmkwem, ma ọ bụ ọkụ mepere emepe.
• While the speaker is IP65 certified for water and dust resistance, it is not designed for submersion in water. Avoid prolonged exposure to heavy rain or splashing.
• Do not disassemble, repair, or modify the speaker. This may void the warranty and pose safety risks.
• Debe ọkà okwu n'ebe ụmụaka nọ na anụ ụlọ.
• Jiri naanị eriri nchaji enyere ma ọ bụ ihe dabara adabara.
• Jiri akwa dị nro hichaa ọkà okwu. Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
• Tụfuo ọkà okwu na batrị ya n'ụzọ kwesịrị ekwesị dịka iwu obodo si dị.

3. Ihe ngwugwu

Biko lelee ngwungwu maka ihe ndị a:

• 1 x TTEC Dynamite Duo Portable Bluetooth Speaker
• 1 x AUX USB
• 1 x Micro USB eriri USB
• 1 x eriri eji ebu
• Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)

4. Ngwaahịa gafereview

Familiarize yourself with the components and controls of your TTEC Dynamite Duo speaker.

Foto 4.1: Isi view of the TTEC Dynamite Duo Portable Bluetooth Speaker, showcasing its cylindrical design and speaker grille.

Foto 4.2: Close-up of the control panel on the TTEC Dynamite Duo speaker, showing the power, play/pause, volume, and mode buttons.

Foto 4.3: View of the charging port (Micro USB) and auxiliary input (AUX) on the TTEC Dynamite Duo speaker, typically located under a protective flap.

Njikwa na egosi:

• Bọtịnụ ike: Pịa ma jide iji gbanye/Gbanyụọ ọkà okwu.
• Bọtịnụ Kwụsị/Kwụsị: Press to play or pause music. During a call, press to answer or end a call. Press and hold to reject an incoming call.
• Mpịakọta nke ala / bọtịnụ egwu gara aga: Press to decrease volume. Press and hold to go to the previous track.
• Bọtịnụ egwu na-esote: Press to increase volume. Press and hold to go to the next track.
• Bọtịnụ ụkpụrụ: Press to switch between Bluetooth and AUX input modes.
• Ihe ngosi LED: Displays charging status, Bluetooth pairing status, and operational mode.

5. Nhazi

5.1 Ịchaji ọkà okwu

Before first use, fully charge the speaker. Use the provided Micro USB cable.

1. Connect the Micro USB end of the charging cable to the speaker's charging port (refer to Figure 4.3).
2. Connect the USB-A end to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show charging status (e.g., red for charging, off or green for fully charged).
4. A full charge takes approximately [X] hours (specific time not provided, user should refer to product packaging or quick start guide if available).

Foto 5.1: The TTEC Dynamite Duo speaker highlighting its extended battery life of up to 12 hours on a single charge.

5.2 Gbanyụọ ma ọ bụ gbanyụọ

• Iji gbanye: Press and hold the Power Button (refer to Figure 4.2) for approximately 3 seconds until you hear an audible prompt and the LED indicator lights up.
• Iji gbanyụọ: Press and hold the Power Button for approximately 3 seconds until you hear an audible prompt and the LED indicator turns off.

5.3 Njikọ Bluetooth

Connect your TTEC Dynamite Duo speaker to a Bluetooth-enabled device.

1. Ensure the speaker is powered on and in Bluetooth pairing mode (the LED indicator will typically flash blue rapidly). If not, press the Mode Button to switch to Bluetooth mode.
2. Na ngwaọrụ gị (smartphone, tabletị, laptọọpụ), gbanye Bluetooth wee chọọ ngwaọrụ dị.
3. Select "TTEC Dynamite Duo" from the list of found devices.
4. Once successfully paired, the LED indicator will turn solid blue, and you will hear a confirmation sound.
5. Ọkà okwu ahụ ga-ejikọghachi na ngwaọrụ ikpeazụ ejikọtara ozugbo mgbe agbanyere ya, ma ọ bụrụ na Bluetooth nke ngwaọrụ ahụ na-arụ ọrụ ma dịkwa n'ime oke.

5.4 Ezi ikuku stereo (TWS) ijikọ

Connect two TTEC Dynamite Duo speakers for a stereo sound experience.

1. Ensure both Dynamite Duo speakers are powered on and not connected to any other Bluetooth device.
2. On one of the speakers (this will be the primary speaker), press and hold the Play/Pause button for approximately 3-5 seconds until you hear a pairing tone. The LED indicator will flash.
3. The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound, and the LED indicators on both speakers will change (e.g., primary speaker flashes slowly, secondary speaker is solid blue).
4. Now, pair your device to the primary speaker via Bluetooth as described in Section 5.3. The audio will play in stereo through both speakers.

Foto 5.2: Illustration of two TTEC Dynamite Duo speakers wirelessly connected to each other, enabling True Wireless Stereo (TWS) audio playback.

5.5 Njikọ AUX

Use the AUX cable to connect the speaker to devices without Bluetooth functionality.

1. Ike na ọkà okwu.
2. Connect one end of the provided AUX cable to the speaker's AUX port (refer to Figure 4.3).
3. Jikọọ nsọtụ nke ọzọ nke eriri AUX na jaak mmepụta ọdịyo nke ngwaọrụ gị.
4. The speaker will automatically switch to AUX mode, or you may need to press the Mode Button to select AUX input.
5. In AUX mode, playback controls (play/pause, next/previous track) on the speaker may not function, and you will need to control playback from your connected device. Volume control on the speaker will still work.

6. Ntuziaka ọrụ

6.1 Music Playback (Bluetooth Mode)

• Gwuo/kwụsịtụ: Press the Play/Pause Button.
• Track na-esote: Press and hold the Volume Up / Next Track Button.
• Gara aga Track: Press and hold the Volume Down / Previous Track Button.

6.2 Njikwa oku

With the built-in microphone, you can manage phone calls when connected via Bluetooth.

• Oku azaa: Press the Play/Pause Button when an incoming call rings.
• Oku ngwụcha: Press the Play/Pause Button during an active call.
• Jụ oku: Press and hold the Play/Pause Button when an incoming call rings.

6.3 Njikwa olu

• Dịkwuo Mpịakọta: Press the Volume Up / Next Track Button.
• Belata Mpịakọta: Press the Volume Down / Previous Track Button.

7. Nlekọta

• Nhicha: Wipe the speaker with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents.
• Nchekwa: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to charge the battery at least once every three months to maintain battery health.
• Mgbochi mmiri na uzuzu: Ensure the protective flap covering the charging and AUX ports is securely closed to maintain the IP65 water and dust resistance.

Foto 7.1: The TTEC Dynamite Duo speaker demonstrating its IP65 certification, making it resistant to water splashes and dust ingress.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

The TTEC Dynamite Duo Portable Wireless Bluetooth Speaker comes with a limited warranty. Please refer to the warranty card included in your package or contact your retailer for specific terms and conditions.

For technical support or further assistance, please contact the retailer where you purchased the product or visit the official TTEC websaịtị maka ozi gbasara ọrụ ndị ahịa.