Godox MS200V Studio Strobe Flash Light Instruction Manual

Okwu mmalite

The Godox MS200V is a compact and versatile studio strobe flash light designed for professional photography. This manual provides detailed instructions for the safe and effective use of your MS200V unit, covering setup, operation, maintenance, and troubleshooting.

Image: The Godox MS200V Studio Strobe Flash Light, highlighting its compact design and integrated features.

Atụmatụ igodo

• Sistemụ ikuku ikuku Godox 2.4G arụnyere: Enables remote control with Godox X1T, XT16, XPro, XProII, X2T, or X3 flash triggers (sold separately). Supports 16 groups (0-9, A-F) and 32 channels for flexible control.
• Upgraded 10W LED Modeling Lamp: Adjustable from 5% to 100% power level for precise lighting preview.
• Precise Power Output: Power output can be set from 1/32 to 1/1 in 50 steps.
• Ọrụ mgbochi preflash: Guarantees synchronization with cameras capable of firing a preflash.
• Mmepụta kwụsiri ike: Maintains power output stability with no more than 2% tolerance during extended use.
• Kọmpat na ibugharị: Weighs approximately 1.3kg with a length of 28.3cm (with lamp cover), making it suitable for various photography applications.
• Ugwu Bowens: Compatible with a wide range of Bowens mount accessories for diverse lighting effects.
• Nchekwa akpaaka: Remembers the last used parameters after 3 seconds of setting completion, restoring them upon restart.

Kedu ihe dị na Igbe ahụ

Biko lelee ọdịnaya nke ngwugwu gị ka ị hụ na ihe niile dị:

• 1x Light Body (Godox MS200V)
• 1x Ntughari
• 1 x eriri ọkụ

Image: The Godox MS200V unit, standard reflector, and power cable as included in the package.

Melite

1. Ịwụnye Strobe ahụ

1. Attach the MS200V light body to a compatible light stand.
2. Secure the strobe by tightening the mounting knob on the light stand.
3. Adjust the tilt angle of the strobe using the handle and locking mechanism on the unit.

Image: The Godox MS200V strobe light securely mounted on a light stand, ready for use.

2. Attaching Accessories (Bowens Mount)

1. Align the accessory (e.g., reflector, softbox) with the Bowens mount on the front of the strobe.
2. Insert the accessory and rotate it clockwise until it locks into place.
3. To remove, press the release button on the Bowens mount and rotate the accessory counter-clockwise.

Image: The Bowens mount on the MS200V, demonstrating compatibility with various light modifiers such as reflectors, softboxes, and snoots.

3. Njikọ ike

1. Ensure the strobe's power switch is in the OFF position.
2. Connect the provided power cable to the power input port on the back of the MS200V.
3. Plug the other end of the power cable into a suitable AC 110-120V/60Hz power outlet.

Ntuziaka ọrụ

1. Ịgbanye / gbanyụọ

Flip the power switch located on the back panel of the strobe to the 'ON' position to power on the unit. Flip it to 'OFF' to power down.

2. Adjusting Flash Power Output

1. The flash power output can be adjusted from 1/32 to 1/1 in 50 steps.
2. Rotate the 'SET' dial on the control panel to increase or decrease the flash power. The current power level will be displayed on the LCD screen.

Image: A close-up of the MS200V's control panel, showing the LCD display and adjustment dial for flash power.

3. Nlereanya Lamp Njikwa

1. Pịa ihe nlereanya lamp button (light bulb icon) on the control panel to turn the 10W LED modeling lamp gbanye ma ọ bụ gbanyụọ.
2. To adjust the brightness, rotate the 'SET' dial while the modeling lamp is active. Brightness can be adjusted from 5% to 100%.

Image: Detail of the 10W COB LED modeling lamp, illustrating its adjustable brightness from 5% to 100%.

4. Godox 2.4G Wireless X System

The MS200V features a built-in 2.4G wireless X system for remote triggering and control. To use this feature:

1. Ensure your Godox flash trigger (e.g., X1T, XPro, X2T) is set to the same group and channel as the MS200V.
2. Use the 'GR/CH' buttons on the MS200V control panel to adjust the group and channel settings.
3. The flash can now be triggered and controlled remotely via the transmitter.

Image: The Godox MS200V demonstrating its compatibility with the Godox 2.4G Wireless X System, showing various trigger models.

5. Mmekọrịta

The MS200V supports various synchronization methods:

• eriri mmekọrịta: Connect a 3.5mm sync cord from your camera to the 'SYNC' port on the MS200V.
• Ụdị Okpurụ Opitik (S1/S2): Press the 'S1/S2' button to activate optical slave mode. S1 mode fires the flash in response to a single flash. S2 mode ignores the camera's preflash and fires on the main flash.
• Wireless X System: As described above, use a compatible Godox trigger for wireless synchronization.

6. Auto Memory Function

The MS200V automatically saves your current settings (flash power, modeling lamp brightness, group/channel) after 3 seconds of inactivity. These settings will be restored when the unit is powered on again.

Nlekọta

• Nhicha: Regularly clean the exterior of the strobe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Nchekwa: Store the unit in a cool, dry place away from direct sunlight and moisture when not in use.
• Ndochi fiusi: The unit uses a replaceable fuse. If the unit fails to power on, check and replace the fuse if necessary. Refer to the specifications for the correct fuse type.
• Nlereanya Lamp: Ihe nlereanya nke LED lamp is designed for long life. If replacement is needed, contact authorized service personnel.

Nchọpụta nsogbu

Nkọwapụta

Ozi nchekwa

• Do not operate the unit with wet hands or in wet conditions.
• Zere ka ọkụ ọkụ ahụ pụta ìhè ozugbo n'anya gị, n'ihi na ọ nwere ike ibute nsogbu ịhụ ụzọ nwa oge.
• Ensure proper ventilation to prevent overheating during prolonged use.
• Agbalịla ịkwatu ma ọ bụ rụzie ihe ahụ n'onwe gị. Gaa na ndị ọrụ ruru eru.
• Debe ebe ụmụaka na-apụghị iru.

Vidiyo ngwaahịa

Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the official GODOX website or contact your authorized GODOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.