Candy Idea CHW6LBX/4U2 Gas Hob User Manual

1. Okwu mmalite

This manual provides detailed instructions for the Candy Idea CHW6LBX/4U2 60 cm gas hob. This stainless steel gas hob features 4 burners with a total nominal power of 7.2 kW. It is designed for easy control with independent black side knobs and includes two cast iron grids for optimal heat transfer. The hob is equipped with a flame safety system for secure cooking. It is pre-configured for natural gas but can be adapted for butane gas. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Ozi nchekwa

Ịdọ aka ná ntị nchekwa izugbe:

• Ensure proper ventilation in the kitchen when using the gas hob.
• Do not leave cooking unattended, especially when using high heat.
• Debe ihe ndị na-ere ọkụ pụọ na hob mgbe ị na-arụ ọrụ.
• Ngwa a nwere a Flame Safety System, which automatically cuts off the gas supply if the flame accidentally extinguishes.
• Ekwesịrị ilekọta ụmụaka ka ha hụ na ha ejighi ngwa eji egwu egwu egwu.
• Ejila stovu ahụ dị ka ihe na-ekpo ọkụ oghere.
• Always use appropriate cookware for the burner size.

Nchekwa Njikọ gas:

• Installation and gas connection must be performed by a qualified technician in accordance with local regulations.
• Verify that the gas supply pressure matches the appliance requirements.
• Check for gas leaks after installation using soapy water, never an open flame.

3. Ntọala na nwụnye

The Candy Idea CHW6LBX/4U2 gas hob is designed for Drop-In installation into a countertop. The appliance comes with a kit for converting from natural gas to butane gas, if required. This conversion should only be performed by a qualified technician.

Akụkụ:

• Akụkụ ngwaahịa (H x W x D): 0.8 x 59.5 x 51 cm
• Integration Dimensions (H x W x D): 3.5 x 56 x 48 cm
• Arọ: 6.8 n'arọ

Eserese nwụnye:

This diagram illustrates the required countertop cutout dimensions (56 cm width, 48 cm depth) and the minimum clearances for installation. It also shows the gas connection point and its dimensions relative to the hob.

Ensure sufficient clearance around the hob as indicated in the installation diagram. The electrical cable and the kit for gas conversion are included with the product.

4. Ntuziaka ọrụ

The Candy CHW6LBX/4U2 gas hob features four burners with independent side controls for precise heat management.

Burner Configuration and Power:

• N'ihu aka ekpe: 9.5 cm diameter, 2.7 kW
• Ihu Ihu: 5 cm diameter, 1 kW
• N'azụ azụ: 7 cm diameter, 1.75 kW
• N'azụ ekpe: 7 cm diameter, 1.75 kW

Iji Burners:

1. Place appropriate cookware centrally on the cast iron grid above the desired burner.
2. Push down and turn the corresponding control knob counter-clockwise to the maximum flame position.
3. Hold the knob for a few seconds to allow the flame safety device to activate. Release the knob; the burner should remain lit. If it extinguishes, repeat the process.
4. Adjust the flame size by turning the knob between the maximum and minimum flame settings.
5. To turn off the burner, turn the knob clockwise to the 'off' position.

Product in Use:

5. Nlekọta na nhicha

Ịsacha na mmezi mgbe niile ga-eme ka o doo anya na ihe mkpuchi gas gị ga-adịte aka ma rụọ ọrụ nke ọma.

Nhicha Elu stovu:

• Kwe ka hob ahụ dị jụụ kpamkpam tupu ihicha ya.
• Use a soft cloth and a mild detergent solution to clean the stainless steel surface. Avoid abrasive cleaners or scouring pads, which can scratch the finish.
• The stainless steel is designed to be anti-fingerprint, making it easier to maintain.

Cleaning the Grids and Burner Components:

• Abụọ ahụ cast iron grids are removable for easy cleaning. They can be washed with warm soapy water. Ensure they are completely dry before placing them back on the hob.
• Remove the burner caps and flame spreaders. Clean them with warm soapy water and a non-abrasive brush. Ensure all parts are dry and correctly reassembled before use.
• Periodically check the burner holes for any blockages and clean them gently if necessary.

6. Nchọpụta nsogbu

If you encounter issues with your gas hob, refer to the following common problems and solutions:

• Burner does not ignite:
  • Check if the gas supply is open.
  • Ensure the burner components (cap, flame spreader) are correctly positioned.
  • Hold the control knob down for a longer period (5-10 seconds) to allow the safety device to heat up.
  • Clean any debris from the ignition pin or burner holes.
• Flame is irregular or yellow:
  • Ensure the burner components are clean and correctly assembled.
  • Check for proper ventilation in the kitchen.
  • If the issue persists, contact a qualified technician to check the gas pressure or burner settings.
• Isi gas:
  • Immediately turn off the gas supply.
  • Mepee windo na ọnụ ụzọ maka ikuku.
  • Ejila mgba ọkụ eletrik ọ bụla ma ọ bụ ngwa.
  • Contact a qualified technician or your gas supplier immediately.

For problems not listed here or if solutions do not resolve the issue, contact customer support or a qualified service technician.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation provided with your purchase or contact Candy customer service. Keep your proof of purchase for any warranty claims.

For technical assistance, spare parts, or service requests, please contact your local Candy service center. Information regarding spare parts availability is currently unavailable.