1. Okwu mmalite
The Luraco Pro-35K Professional Nail Drill is a high-performance, cordless, and rechargeable e-file designed for professional nail technicians. Manufactured in the U.S.A. with U.S. and global components, this device offers advanced features for efficient and precise nail care. Its robust design ensures reliability and smooth operation.
Akụkụ ndị bụ isi:
- True Brushless motor for extended lifespan and quiet operation.
- Up to 35,000 RPM with high torque for efficient filing.
- Cordless and rechargeable design for portability.
- Variable speed control for customized performance.
- Lightweight and compact for comfortable use.
- Up to 10 hours of continuous operation on a single charge.
- Low vibration and low noise levels for a comfortable experience.
- Durable Stainless-steel & Aluminum handpiece.
- Forward & Reverse control for versatile use.
- Smart overload protection to prevent damage.
- 1-hour auto shutoff timer for energy conservation.
- Built-in cradle for convenient storage and charging.
- Eluigwe na ụwatage compatibility (110V/60Hz to 240V/50Hz).
2. Ozi nchekwa
Amụma: Iji belata ihe ize ndụ nke ọkụ, ọkụ eletrik, ọkụ, ma ọ bụ mmerụ ahụ nye ndị mmadụ:
- Always wear appropriate eye protection during operation.
- Exercise caution when handling the rotating bit to prevent injury.
- Do not operate the device if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Debe ngwaọrụ ahụ na mmiri ma ọ bụ mmiri mmiri ndị ọzọ.
- Ensure the device is turned off before changing bits or performing maintenance.
- Use only approved accessories and bits with this device.
3. Ngwaahịa gafereview
The Luraco Pro-35K consists of a main control unit and a handpiece. The control unit features a speed dial, battery indicator, forward/reverse switch, and charging port. The handpiece is designed for comfortable grip and precise control.
Figure 1: Main unit and handpiece assembly.
Figure 2: Control unit interface with speed dial and function switches.
Figure 3: Handpiece detail, showing the bit insertion area.
4. Nhazi
- Iwepu: Carefully remove all components from the packaging. Verify that all parts are present: control unit, handpiece, power adapter, and user manual.
- Ebube mbụ: Before first use, fully charge the device. Connect the power adapter to the control unit's charging port and plug it into a suitable electrical outlet. The 'CHARGE' indicator light will illuminate. A full charge can take several hours.
- Jikọọ Aka Aka: Connect the handpiece cable securely to the designated port on the control unit.
- Insert Nail Bit: Ensure the handpiece is powered off. Twist the handpiece collar to unlock the chuck, insert the desired nail bit firmly, and then twist the collar back to lock the bit in place. Ensure the bit is fully seated and secure before operation.
5. Ntuziaka ọrụ
- Gbanyụọ/ Gbanyụọ: To power on the device, turn the speed control dial clockwise from the 'OFF' position. To power off, turn the dial counter-clockwise until it clicks into the 'OFF' position.
- Gbanwee ọsọ: Rotate the speed control dial clockwise to increase the RPM (up to 35,000 RPM) and counter-clockwise to decrease it. Start with a lower speed and gradually increase as needed for the task.
- Ntugharị/Ngbanwe njikwa: Use the 'FW/REV' switch to select the rotation direction of the nail bit. 'FW' is for forward rotation, 'REV' is for reverse rotation, and 'N' is for neutral (off). Always switch direction when the handpiece is stopped to prevent damage.
- Ihe ngosi batrị: The 'BATTERY' indicator lights on the control unit show the remaining battery life. Recharge the device when the indicator shows low battery.
- Mkpuchi akpaaka: The device features a 1-hour auto shutoff timer to conserve battery life and prevent accidental operation. If the device is idle for 1 hour, it will automatically power off.
6. Nlekọta
- Nhicha: Regularly clean the handpiece and control unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no dust or debris accumulates in the handpiece chuck.
- Nlekọta Bit: Inspect nail bits before each use for wear or damage. Replace worn bits to ensure optimal performance and safety. Clean bits after each use according to manufacturer guidelines.
- Nchekwa: Store the device in its built-in cradle or a clean, dry place when not in use. Avoid extreme temperatures and direct sunlight.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ngwaọrụ anaghị agbanwu ọkụ. | Batrị agwụla. | Chajie ngwaọrụ ahụ nke ọma. |
| Handpiece not rotating. | Handpiece cable not securely connected. | Ensure the handpiece cable is firmly plugged into the control unit. |
| Bit is loose or vibrating excessively. | Bit not properly inserted or secured. | Ensure the bit is fully seated and the handpiece collar is locked. Replace worn bits. |
| Device stops during operation. | Nchekwa oke ibu arụ ọrụ. | Reduce pressure on the bit. Turn off and restart the device. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | Pro-35K Nail Drill |
| Oke RPM | 35,000 RPM |
| Ụdị moto | True Brushless |
| Ụdị batrị | 12V (gụnyere) |
| Oge ọrụ | Up to 10 hours (without charging) |
| Isi Iyi Ike | Akwanyere batrị |
| Voltage | 110V/60Hz to 240V/50Hz (Universal) |
| Ihe eji eme aka | Aluminom, igwe anaghị agba nchara |
| Akụkụ ngwaahịa | 3 x 1.25 x 6 sentimita asatọ |
| Ibu | 4 pound |
| Onye nrụpụta | Luraco |
| UPC | 893640001670 |
9. Akwụkwọ ikike na nkwado
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Luraco websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.
Luraco is committed to providing high-quality products and customer satisfaction. If you encounter any issues not covered in this manual, please contact Luraco customer service for assistance.
