Wallpad L6

Wallpad L6 Gold Brushed Aluminum Wall Module User Manual

Model: L6 - Dual USB Charging Module

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Ntuziaka nchekwa

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.

4. Ntọala na nwụnye

This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.

  1. Kwadebe Mpaghara Nwụnye: Gbaa mbọ hụ na agbanyụrụ ọkụ na mpaghara nrụnye na isi sekit.
  2. Nyochaa ndakọrịta: The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
  3. Jikọọ Wiring: Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
  4. Wụnye modulu ahụ: Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
  5. Attach Faceplate: Secure the brushed aluminum faceplate onto the module.
  6. Weghachi ike: Ozugbo echichi zuru ezu na njikọ niile echekwara, weghachi ike na ihe nbibi sekit.
Azu view of Wallpad L6 module with dimensions and an 86 Type Square Box

Foto 4.1: Azu view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.

5. Operating Instructions (Dual USB Charging Module)

The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.

N'ihu view of Wallpad L6 dual USB charging module with a red indicator light

Foto 5.1: N'ihu view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.

  1. Jikọọ ngwaọrụ: Plug your USB charging cable into one of the two USB-A ports on the module.
  2. Ngosi nchaji: The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
  3. Ịchaji: Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
  4. Kwụpụ: Ozugbo ịchajichara, wepụ ngwaọrụ gị n'enweghị nsogbu, wee jiri eriri USB wepụ ya na modulu ahụ.

Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.

Wallpad L6 EU French Socket module installed in a room setting

Foto 5.2: Onye bụbuample of a Wallpad L6 EU French Socket module, showcasing its design within a living space.

Wallpad L6 wall switch module with a satin aluminum panel and illuminated buttons

Foto 5.3: Onye bụbuample of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.

6. Nlekọta

7. Nchọpụta nsogbu

NsogbuIhe nwere ike imeNgwọta
Module not charging devices.
  • Enweghị ike na modulu ahụ.
  • Igwe USB ma ọ bụ ngwaọrụ ezighi ezi.
  • Nchekwa oke ibu arụ ọrụ.
  • Check circuit breaker and ensure power is on.
  • Try a different USB cable or device.
  • Disconnect devices, wait a few minutes, then reconnect.
Module is loose in the wall.Ịkwado na-ekwesịghị ekwesị.Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used.
Red indicator light is off.Enweghị ike na modulu ahụ.Check circuit breaker and wiring connections. Consult a qualified electrician if necessary.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official Wallpad websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha.

Akwụkwọ ndị emetụtara - L6

Tupuview Home Use 86-type Wall Mount Box Installation Instructions
Detailed installation instructions for the Home Use 86-type Wall Mount Box by WenZhou Wallpad Electric Co.,LTD, covering concealed and surface-mounted methods, safety precautions, and product limitations.
Tupuview Wallpad European Standard Switches & Sockets User Manual
Comprehensive user manual for Wallpad European Standard Switches & Sockets, covering safety information, product overview, technical specifications, installation instructions, operation, maintenance, compliance, and warranty.
Tupuview Light Switch Wiring Configurations: 1 Way, 2 Way, and Intermediate
Detailed guide to understanding and implementing 1-way, 2-way, and intermediate wiring configurations for light switches, including textual descriptions of diagrams and components.