1. Okwu mmalite
The EPOMAKER TH80 Pro is a high-performance 75% layout mechanical gaming keyboard designed for versatility and customization. It features a compact design, hot-swappable switches, tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired), PBT keycaps, and vibrant RGB backlighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your TH80 Pro keyboard.
Image: The EPOMAKER TH80 Pro keyboard showcasing its 75% layout and key features like hot-swappable design, tri-mode connectivity, and RGB backlighting.
2. Ihe ngwugwu
Tupu ịmalite, biko hụ na ihe niile dị na ngwugwu gị:
- EPOMAKER TH80 Pro Mechanical Keyboard
- USB-C na eriri USB-A
- Onye na-adọkpụ igodo
- Gbanwee Puller
- Extra Switches (quantity may vary)
- 2.4GHz USB Receiver (stored in the keyboard)
- Akwụkwọ ntuziaka (akwụkwọ a)
Image: Contents of the EPOMAKER TH80 Pro package, including the keyboard, USB cable, keycap puller, and user manual.
3. Ntọala na Njikọta
3.1 Ịgbanye na Ịchaji
Locate the power switch on the underside of the keyboard. Slide it to the 'ON' position to power on the device. To charge the keyboard, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source. The keyboard features a 4000mAh battery for extended use.
Image: Underside of the EPOMAKER TH80 Pro keyboard, showing the power switch and the storage slot for the 2.4GHz USB receiver.
3.2 Ụdị Njikọta
The TH80 Pro supports three connectivity modes:
- Ụdị eriri USB-C: Connect the keyboard directly to your device using the USB-C cable. This mode also charges the keyboard.
- Ọnọdụ ikuku 2.4GHz: Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard will automatically connect. The polling rate can reach up to 1000Hz in this mode.
- Ụdị Bluetooth 5.0: The keyboard can connect to up to three Bluetooth devices.
Image: Diagram illustrating the tri-mode connectivity options of the EPOMAKER TH80 Pro, including USB-C wired, Bluetooth, and 2.4GHz wireless, connecting to various devices like PC, laptop, tablet, and smartphone.
Ntuziaka njikọ Bluetooth:
- Gbaa mbọ hụ na agbanyere ahụigodo.
- Pịa fn+1, fn+2, ma ọ bụ fn+3 to select a Bluetooth channel. The corresponding key will flash rapidly, indicating pairing mode.
- On your device, search for Bluetooth devices and select "TH80 Pro" to connect.
- Once connected, the key will stop flashing and remain steadily lit.
4. Na-arụ ọrụ ahụigodo
4.1 Ọrụ igodo isi
The TH80 Pro features a 75% layout, providing essential keys while maintaining a compact form factor. Standard alphanumeric keys, function row (F1-F12), navigation keys (Page Up, Page Down, Home, End via Fn combinations), and arrow keys are present.
4.2 RGB njikwa ọkụ azụ
The keyboard features customizable RGB backlighting. Use the following shortcuts to control the lighting effects:
- Fn + Oghere azụ: Turn on/off backlighting.
- Fn + |\: Toggle through different RGB lighting effects.
- Fn + P: Toggle through different RGB lighting colors.
Image: The EPOMAKER TH80 Pro keyboard displaying its vibrant RGB backlighting, with an overlay showing key combinations for controlling backlight functions.
4.3 Njikwa Knob
The rotary knob located on the top right of the keyboard serves multiple functions:
- Tụgharịa: Adjusts system volume.
- Pịa: Mebie/na-ewepụ ụda olu.
4.4 Ngwanrọ enwere ike ime mmemme
The TH80 Pro is compatible with dedicated software for advanced customization. This software allows you to:
- Dezie macro.
- Hazie mmetụta ọkụ RGB.
- Remap keys.
- Redefine knob functions.
The software is compatible with Windows and Mac OS. Please visit the official EPOMAKER websaịtị iji budata ụdị kachasị ọhụrụ.
Image: Screenshot of the EPOMAKER TH80 Pro's programmable software interface, showing options for macro editing, RGB effects, key remapping, and knob redefinition.
4.5 Mgbanwe ọkụ-Swappable
The TH80 Pro features a hot-swappable PCB, allowing you to change mechanical switches without soldering. It supports most 3-pin or 5-pin mechanical switches. Use the included switch puller to carefully remove switches and insert new ones.
Foto: nso nso view of the EPOMAKER TH80 Pro keyboard demonstrating the hot-swappable switch feature, showing a switch being removed with a switch puller and the underlying hot-swap socket.
5. Nlekọta
5.1 Ihicha ahụigodo
Iji nọgide na-arụ ọrụ na ọdịdị dị mma, na-ehicha ahụigodo gị mgbe niile:
- Disconnect the keyboard from all power sources.
- Jiri akwa dị nro na-enweghị akwa dampened with a small amount of water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use the included keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Hụ na ahụigodo ahụ kpọrọ nkụ kpamkpam tupu ị jikọọ ya ọzọ.
5.2 Mgbanwe igodo na mgbanwe
The PBT keycaps are durable and oil-resistant. If you wish to replace them or the switches:
- Use the keycap puller to gently remove keycaps by hooking it onto the sides of the keycap and pulling upwards.
- Use the switch puller to remove switches by compressing the clips on the top and bottom of the switch and pulling upwards.
- Align new switches carefully with the PCB sockets and press down firmly until they click into place.
- Place new keycaps onto the switch stems and press down until secure.
6. Nchọpụta nsogbu
If you encounter issues with your EPOMAKER TH80 Pro, refer to the following common solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ahụigodo anaghị azaghachi (Ejikọrọ) | Loose cable connection, faulty USB port, keyboard off. | Ensure USB-C cable is securely connected. Try a different USB port or cable. Check if the power switch is ON. |
| Keyboard not responding (2.4GHz Wireless) | Receiver not connected, low battery, keyboard off, interference. | Ensure 2.4GHz receiver is plugged in. Charge the keyboard. Check if the power switch is ON. Move closer to the receiver or reduce interference. |
| Keyboard not responding (Bluetooth) | Not paired, low battery, out of range, incorrect channel selected. | Re-pair the keyboard (Fn+1/2/3). Charge the keyboard. Ensure device Bluetooth is on. Select the correct Bluetooth channel. |
| RGB backlighting not working | Backlight turned off, software issue. | Press Fn + Backspace to toggle backlight. Check software settings. |
| Igodo pịnye ugboro abụọ ma ọ bụ ghara ịdenye aha | Mgbanwe na-ezighi ezi, irighiri ihe n'okpuru igodo igodo. | Remove keycap and clean. Replace the faulty switch using the switch puller. |
7. Nkọwapụta
Key technical specifications for the EPOMAKER TH80 Pro keyboard:
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | TH80 Pro |
| Nhazi | Kọmpat 75% |
| Njikọta | Bluetooth 5.0, 2.4GHz Ikuku, USB-C Waya |
| Ike batrị | 4000mAh |
| Isi okwu | PBT, MDA Profile, Dye-sub Technique |
| Mgbanwe | Hot-swappable (3/5-pin compatible) |
| Ịkụ azụ azụ | RGB |
| OS dakọtara | Windows, Mac OS, PS5, PS4, Xbox, Android, iOS |
| Akụkụ ngwaahịa | 12.91"L x 5.59"W x 1.57"H (32.8cm x 14.2cm x 4cm) |
| Ibu Ibu | 2.99 pound (1.36 n'arọ) |
8. Akwụkwọ ikike na nkwado
EPOMAKER products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EPOMAKER website. If you require technical assistance or have questions not covered in this manual, please contact EPOMAKER customer support through their official websaịtị ma ọ bụ ụlọ ahịa ebe ịzụrụ ngwaahịa ahụ.
