Okwu mmalite
Thank you for choosing the OttLite Wellness Series Capture Clip-On LED Ring Light. This versatile lighting solution is designed to provide optimal illumination for various tasks, including computer work, reading, and content creation. Featuring OttLite's exclusive ClearSun LED technology, this light aims to reduce eyestrain and enhance color accuracy. This manual provides essential information for the safe and effective use of your new light.
Ozi nchekwa dị mkpa
- Read all instructions before using this product to prevent injury or damage.
- Do not operate the light with a damaged cord or plug. If the light malfunctions, discontinue use immediately.
- This light is for indoor use only. Do not expose to water or high humidity.
- Do not attempt to disassemble or modify the light. There are no user-serviceable parts inside.
- Keep the light away from heat sources and direct sunlight to prevent overheating.
- Always unplug the light from the power source before cleaning or when not in use.
- Avoid looking directly into the LED light source for extended periods, as it may cause eye discomfort.
Ihe ngwugwu
- OttLite Wellness Series Capture Clip-On LED Ring Light
- USB Power USB
Note: A USB power adapter is not included and must be supplied by the user.
Melite
- Mepee ọkụ ahụ: Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
- Tinye ihe nkiri ahụ: Securely attach the spring-loaded clip to a stable surface such as a desk, shelf, or table edge. Ensure the clip has a firm grip to prevent the light from falling.
- Njikọ Ike: Insert the small end of the USB power cable into the port on the light's base. Plug the larger end of the USB cable into a compatible USB power adapter (not included) or a computer's USB port.
- Activate Power Switch: Locate the small sliding switch near the USB port on the light's base. Slide it to the 'ON' position. The light will not operate if this switch is in the 'OFF' position, even when plugged in.
- Debe ìhè ahụ: Adjust the flexible gooseneck to direct the ring light to your desired position and height. The 21.25-inch flexible neck allows for precise light placement.
Ntuziaka ọrụ
The OttLite Capture Clip-On LED Ring Light features inline cord controls for easy adjustment of power, brightness, and color temperature.
- Gbanyụọ/ Gbanyụọ: Pịa Gbanye/ Gbanyụọ button (red power symbol) on the cord controls to turn the light on or off.
- Gbanwee ihie: Jiri ihe + na - buttons to increase or decrease the brightness level. There are 10 levels of brightness available.
- Gbanwee Ụdị agba: Pịa MODE button (circular arrow symbol) to cycle through the three available color temperature modes: Warm White, Bright White, and Natural Daylight.
Nlekọta
- Nhicha: Ensure the light is unplugged before cleaning. Use a soft, dry cloth to wipe down the light and its components. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Nchekwa: When not in use for extended periods, store the light in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ọkụ: The LED bulbs are integrated and not replaceable. They are designed for long-lasting performance.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | 1. Power cable not securely connected. 2. USB power adapter not functioning. 3. Side power switch is OFF. | 1. Ensure USB cable is firmly plugged into both the light and the power source. 2. Try a different USB power adapter or USB port. 3. Locate the small sliding switch near the USB port on the light's base and ensure it is in the 'ON' position. |
| Ìhè na-ada ada ma ọ bụ flickers. | 1. Low power supply. 2. Ntọala ihie dị oke ala. | 1. Ensure the USB power source provides sufficient power. Try a different USB adapter. 2. Press the '+' button on the inline cord controls to increase brightness. |
| Cannot change color mode or brightness. | Inline controls are unresponsive. | Ensure the light is powered on and the side power switch is in the 'ON' position. If issues persist, unplug and re-plug the light to reset. |
Nkọwapụta
- Ụdị: CSJ36G5W
- Isi mmalite ike: USB (Adapter not included)
- Ụdị ọkụ: Ikanam
- Ụdị okpomọkụ agba: 3 (Warm White, Bright White, Natural Daylight)
- Ọkwa ihie: 10
- Flexible Neck Length: Ihe dị ka sentimita abụọ
- Dayameta ọkụ mgbanaka: Ihe dị ka sentimita abụọ
- Ndekọ ngosi agba (CRI): 95+
- Akụkụ ngwaahịa: 4.5 x 4.5 x 25 inches (assembled)
- Ibu ihe: 11.2 ounces
- Ihe: Ọla
Akwụkwọ ikike na nkwado
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official OttLite websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.
