HiTauing 200W Aquarium Heater Instruction Manual

1. Ngwaahịa gafereview

The HiTauing 200W Aquarium Heater is designed to maintain a warm and stable environment for your aquatic pets. This submersible heater features a digital display for precise temperature control and multiple safety mechanisms.

This 200W aquarium heater is intended exclusively for indoor aquarium use and heating. Ensure no part of the heater is covered by filter material or debris to prevent malfunctions.

Foto nke 1.1: HiTauing 200W Aquarium Heater with external temperature controller.

2. Ịdọ aka ná ntị nchekwa

Please read all safety warnings carefully before use to prevent injury or product damage.

• Before powering on, inspect the product for any damage. If any damage is found, discontinue use immediately and contact customer support.
• The submersible aquarium heater must be fully submerged in water. The temperature controller unit is not submersible and must not be placed in water.
• Do not disassemble the aquarium heater or make structural modifications. This can lead to product damage and potential injury.
• When cleaning or performing maintenance on the aquarium heater, always disconnect power for 5 to 10 minutes before removing it from the water.
• Ensure the heater is securely installed using the provided suction cups to prevent it from detaching and potentially causing issues.
• This heater is designed for aquariums between 20 to 40 gallons. Using it in tanks outside this range may affect performance.

Foto nke 2.1: Diagram illustrating the 6-point safety system, including quartz glass, anti-scald shell, overheat protection, and low water level warning.

3. Nhazi ntuziaka

1. Bupụ ma nyochaa: Carefully remove the heater and controller from the packaging. Inspect all components for any signs of damage.
2. Debe Igwe ọkụ: Place the submersible heater fully inside your aquarium. Ensure it is positioned vertically or horizontally, completely covered by water. Avoid placing it directly in the substrate or near strong water flow that could dislodge it.
3. Nchekwa site na iko mmiri: Use the two provided suction cups to firmly attach the heater to the inner wall of the aquarium. This prevents movement and ensures stable operation.
4. Position the Controller: Mount the external temperature controller in a dry location, away from water splashes. The controller unit is not waterproof.
5. Njikọ Ike: Plug the heater's power cord into a suitable electrical outlet (220V AC).

Foto nke 3.1: Examples of correct (fully submerged) and incorrect (partially submerged or out of water) heater installations.

4. Ntuziaka ọrụ

The HiTauing aquarium heater features a digital display temperature control system for real-time water temperature monitoring and adjustment.

• Ike Na: Once plugged in, the digital display on the controller will illuminate.
• Okpomọkụ Ngosipụta: The display shows the current water temperature and the set temperature.
• Na-agbanwe okpomọkụ: The adjustable temperature range is 17 °C to 34 °C (64 °F to 93 °F). Press the temperature setting button to adjust the desired temperature. Each press adjusts the temperature by ± 1 °F/°C.
• Switching Units (°F/°C): Press and hold the temperature setting button for 3 seconds to switch between Fahrenheit (°F) and Celsius (°C).
• Ihe ngosi ikpo oku: A red light on the controller indicates that the heater is actively heating the water.
• Constant Temperature Indicator: A green light on the controller indicates that the heater has reached the set temperature and is maintaining it.
• kpo oku ngwa ngwa: The heater utilizes a high-quality nichrome alloy electric heating wire for efficient and consistent temperature maintenance, reaching the set temperature within minutes. Heating automatically stops once the set temperature is achieved and resumes if the temperature drops.

Foto nke 4.1: Diagram detailing the digital display, temperature control button, and heating/constant temperature indicators.

5. Nlekọta

• Nhicha mgbe niile: Over time, algae and mineral deposits may accumulate on the heater. To clean, disconnect the heater from power for 5-10 minutes, then carefully remove it from the aquarium. Gently wipe the heater surface with a soft cloth or sponge. Do not use abrasive cleaners or harsh chemicals.
• Lelee maka mmebi: Periodically inspect the heater and power cord for any signs of wear, cracks, or damage. If any damage is observed, discontinue use and replace the unit.
• Suction Cup Inspection: Ensure the suction cups remain firmly attached to the aquarium wall. Replace them if they lose their grip.

6. Nchọpụta nsogbu

• Koodu mperi E1: If the temperature control system displays an "E1" error code, it indicates that the submersible heater is not fully submerged in water. Immediately unplug the heater, ensure it is completely underwater, and then plug it back in.
• Ihe na-ekpo ọkụ anaghị akpọ ọkụ:
  • Lelee ma ọ bụrụ na etinyere eriri ọkụ n'ime oghere.
  • Verify that the set temperature is higher than the current water temperature.
  • Gbaa mbọ hụ na mmiri na-ejupụta na ikpo ọkụ.
  • Check for any visible damage to the heater or controller.
• Mgbanwe okpomọkụ:
  • Ensure the heater is appropriately sized for your aquarium volume (200W for 20-40 gallons).
  • Check for strong drafts or external temperature changes affecting the aquarium.
  • Ensure no filter material or debris is covering the heater, which can impede heat distribution.

7. Nkọwapụta

Foto nke 7.1: Chart showing different heater powers, lengths, and recommended tank sizes.

8. Akwụkwọ ikike & Nkwado

As a brand seller, our primary goal is to provide high-quality products and support your purchase. We offer a Ọrụ akwụkwọ ikike 2 afọ site na ụbọchị ịzụrụ.

Should you encounter any issues with your HiTauing 200W aquarium heater, please do not hesitate to contact us for assistance. Our customer support team is dedicated to helping you resolve any problems.