Insta360 X3 Battery Instruction Manual

1. Okwu mmalite

This manual provides essential information for the safe and effective use of your Insta360 X3 Battery. Please read this manual thoroughly before use and retain it for future reference.

Image 1.1: Main view of the Insta360 X3 Battery.

2. Ozi nchekwa

CAUTIONS IN USE:

• Do not expose the battery to fire or place into fire.
• Akwụghachila chajị batrị ahụ.
• Do not disassemble, crush, puncture or deform the battery.
• Ekwela ka batrị dị mmiri ma ọ bụ imikpu ya na mmiri.

Failure to follow these instructions may result in fire, electric shock, injury, or damage to the product or property.

Foto 2.1: Akụkụ view of the Insta360 X3 Battery showing safety warnings and product identification.

3. Ngwaahịa gafereview

The Insta360 X3 Battery is designed to provide extended power for your Insta360 X3 camera. It features a large 1800mAh capacity, ensuring maximum time for capturing content.

Image 3.1: Visual representation of the 1800mAh battery capacity.

The battery is equipped with a waterproof rubber ring to maintain the camera's waterproof performance when properly installed. It also comes with a protective case that includes a built-in memory card storage slot for convenience and peace of mind.

Image 3.2: The battery case featuring integrated memory card storage.

4. Ntọala & Nchaji

4.1 Ịtinye batrị

To insert the battery into your Insta360 X3 camera, ensure the battery is oriented correctly and gently slide it into the battery compartment until it clicks securely into place. Always check the condition of the battery buckle and waterproof rubber ring before insertion. If damaged, it may affect the camera's waterproof performance.

4.2 Ịchaji batrị

The battery must be charged with the Fast Charge Hub officially sold by Insta360 or connected to a matching camera through the camera power adapter.

• When charging with the hub, ensure that the battery's charging point is aligned on the same side as the status indicators.
• It is suggested to connect the Fast Charge Hub to a 12V 3A power adapter. Using an adapter above 12V 3A may not increase charge speed or may produce unexpected results. When below 12V 3A, simultaneous charging may not work correctly and charging time may be prolonged.

The ambient temperature for battery charging should be between 0°C to 40°C (32°F to 104°F).

5. Ọrụ

Once the battery is fully charged and securely inserted into your Insta360 X3 camera, you can power on your camera and begin recording. Refer to your Insta360 X3 camera's manual for specific operating instructions.

6. Nlekọta & Nchekwa

• Do not use or store batteries in a hot environment. Doing so may affect or shorten battery life.
• It is strictly forbidden to use batteries not officially sold by Insta360. If you need to replace the battery, please purchase it on the official website of Insta360 or through designated channels. Insta360 is not responsible for battery accidents and equipment failures caused by the use of unofficially provided batteries.
• Chekwaa batrị n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.

7. Nchọpụta nsogbu

If you encounter issues with your Insta360 X3 Battery, consider the following:

• Batrị anaghị achaji: Ensure the charging cable and adapter are correctly connected and functioning. Verify that the battery is properly seated in the Fast Charge Hub.
• Ndụ obere batrị: Check the ambient temperature during use; extreme temperatures can affect performance. Ensure you are using an official Insta360 battery.
• Ọzịza Batrị: If the battery appears swollen or damaged, discontinue use immediately and dispose of it safely according to local regulations. Do not attempt to charge or use a swollen battery.

8. Nkọwapụta

9. Akwụkwọ ikike & Nkwado

For warranty information and technical support, please visit the official Insta360 website or contact their customer service directly. Ensure you retain your proof of purchase for warranty claims.

Official Insta360 Store: Insta360 Store on Amazon