1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.
2. Ntuziaka nchekwa
- Nchekwa Eletriki: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
- Voltage: This product operates on a 230V AC power supply.
- Ogo IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
- Isi mmalite ọkụ: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
- Okpomọkụ arụ ọrụ: Ensure the operating environment is within the specified temperature range to prevent damage.
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
- Mounting accessories (screws, wall plugs, foam pads)
Figure 2: Included mounting accessories.
4. Ntọala na nwụnye
Soro usoro ndị a maka nrụnye nke ọma:
- Kwụpụ ike: Tupu ịmalite, hụ na agbanyụrụ isi ike dị na ebe nrụnye ahụ na ihe mgbawa sekit ahụ.
- Kwadebe elu elu: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
- Gbakwunye mkpịrị mgbago: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Ọgụgụ 3: N'azụ view with mounting bracket.
- Wiring: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Figure 4: Wiring terminal connection points.
- Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Weghachi ike: Switch the main power supply back on.
5. Ntuziaka ọrụ
The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.
Ọrụ Ihe Mmetụta Mkpụgharị
- The microwave motion detector reacts to movement within a range of up to 6 meters.
- Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
- The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.
Adjusting Sensor Settings (DIP Switches)
The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.
Figure 5: DIP switches for sensor configuration.
Refer to the markings next to the DIP switches for specific settings related to:
- Oke nchọpụta: Adjusts the maximum distance at which motion is detected.
- Ogologo oge: Sets the duration the light remains on after the last detected motion.
- Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.
Mara: Always disconnect power before adjusting DIP switches to avoid electrical hazards.
6. Nlekọta
- Nhicha: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
- Nchekwa ụmụ ahụhụ: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
- Enweghị akụkụ ndị ọrụ nwere ike ịrụ ọrụ: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.
7. Nchọpụta nsogbu
If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ọkụ. Wiring na -ezighi ezi. Daylight sensor setting too high. | Lelee ihe mgbawa sekit na njikọ ike. Verify wiring connections (Live, Neutral). Adjust the daylight sensor (Lux) setting on the DIP switches. |
| Ìhè na-anọ mgbe niile. | Achọpụtara mmegharị na-aga n'ihu. Hold time setting too long. Ihe mmetụta sensọ adịghị arụ ọrụ. | Ensure no constant movement in the detection area. Adjust the hold time setting on the DIP switches to a shorter duration. Ọ bụrụ na nsogbu ka dị, kpọtụrụ nkwado. |
| Light turns on/off too frequently. | Sensitivity too high. Detection range too wide. | Reduce the sensitivity and/or detection range using the DIP switches. |
| Sensor does not detect motion. | Sensitivity too low. Detection range too narrow. Obstruction blocking sensor. Daylight sensor setting too low (light always on). | Increase sensitivity and/or detection range via DIP switches. Ensure no large metal objects or thick walls are directly in front of the sensor. Adjust the daylight sensor (Lux) setting. |
8. Nkọwapụta
| Ụdị | EMOS |
| Nọmba nlereanya | ZM4328 |
| Akụkụ (dayamita x Elu) | 220 mm x 53 mm (approx. 8.66 in x 2.09 in) |
| Ibu | 622 grams (ihe dị ka 1.37 lbs) |
| Ike | 15 Watt |
| Flux na-egbuke egbuke | 1500 lumen |
| Okpomọkụ agba | 4000 Kelvin (Ọcha na-anọpụ iche) |
| Ndekọ ngosi agba (CRI) | 80 |
| Incandescent Equivalence | 100 Watt |
| Voltage | 230 volts AC |
| Ogo IP | IP54 |
| Ihe onwunwe | Acrylonitrile Butadiene Styrene (ABS), Plastic diffuser |
| Atụmatụ pụrụ iche | Microwave Motion Detector, Energy-saving, Waterproof |
| Klas arụmọrụ ike | E (on new scale from 1.9.2021) |
Ọgụgụ 6: Akụkụ ngwaahịa.
Figure 7: Energy Efficiency Label (Class E).
9. Akwụkwọ ikike na nkwado
Akwụkwọ ikike
This EMOS ZM4328 TORI LED Ceiling Light comes with a 3-afọ akwụkwọ ikike site na ụbọchị ịzụrụ. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike. Akwụkwọ ikike ahụ na-ekpuchi ntụpọ dị na akụrụngwa yana arụ ọrụ n'okpuru ojiji nkịtị.
Nkwado ndị ahịa
For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS websaịtị.
