1. Okwu mmalite
The Elitech RC-5+ TE is a digital USB temperature data logger designed for precise temperature monitoring in various applications, including cold chain logistics, food storage, and medical environments. This device features an external temperature sensor, automatic PDF report generation, and a large data storage capacity. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance and accurate data collection.
2. Ngwaahịa gafereview
The Elitech RC-5+ TE data logger is a compact and portable device equipped with an LCD screen, two control buttons, a USB port, and an external temperature probe. It is designed for ease of use and reliable temperature recording.
Image 2.1: Elitech RC-5+ TE Data Logger with External Sensor
The device measures approximately 3.2 inches in height, 1.3 inches in width, and 0.5 inches in thickness, making it suitable for various placement needs. It also includes a loop for easy hanging.
Image 2.2: Device Dimensions and Portability
3. Nhazi
Ihe ngwugwu 3.1
Before proceeding, please verify that all items are present in the package:
- Elitech RC-5+ TE Data Logger (battery contained)
- USB External Sensor
- Asambodo mmezi
- Akwụkwọ ntuziaka onye ọrụ
Image 3.1: Included Package Items
3.2 Ntinye batrị
The device comes with a pre-installed lithium metal battery. If replacement is needed, follow these steps:
- Chọta mkpuchi batrị ahụ n'azụ ngwaọrụ ahụ.
- Use a coin or small tool to gently twist the battery cover counter-clockwise to open it.
- Wepu batrị ochie.
- Insert a new CR2032 lithium metal battery with the positive (+) side facing up.
- Dochie mkpuchi batrị ahụ ma tụgharịa ya n'akụkụ aka nri iji jide ya.
Image 3.2: Battery Replacement Steps
3.3 External Sensor Connection
The RC-5+ TE includes an external temperature sensor for more flexible measurement. To use the external sensor, simply plug it into the USB port of the data logger. If you wish to use the internal sensor, remove the external probe and configure the device via the Elitechlog software.
Image 3.3: External Sensor Connection and Internal Sensor Activation
3.4 Software Installation and Parameter Setting
To fully utilize the data logger's features, including setting parameters like logging interval, alarm ranges, and temperature unit (Fahrenheit/Celsius), download and install the Elitechlog software from the official Elitech website. The software allows for comprehensive configuration and data management.
4. Ntuziaka ọrụ
4.1 Starting and Stopping Recording
- Malite ndekọ: Press and hold the left button (Play/Start) for approximately 5 seconds until 'REC' appears on the LCD.
- Kwụsị ịdekọ: Press and hold the right button (Pause/Stop) for approximately 5 seconds until 'END' appears on the LCD.
4.2 LCD ngosi interface
The LCD screen provides real-time information and recorded data. Press the left button briefly to cycle through different display modes:
- Okpomọkụ dị ugbu a
- Logging Points (remaining capacity)
- Oge dị ugbu a
- Ụbọchị dị ugbu a
- Edekọla Okpomọkụ Kachasị Elu
- Edekọla Okpomọkụ Kachasị Elu
Image 4.1: LCD Interface Display Modes
4.3 Marking Events
During recording, you can mark specific events by double-clicking the right button (Pause/Stop). This creates a timestamp in the data, useful for noting significant occurrences.
4.4 Data Download and Report Generation
After recording, connect the data logger to a computer via its USB port. The device will automatically generate a PDF report with embedded data, which can be accessed without special software. For more advanced analysis and to export data in other formats (Word, Excel, TXT), use the Elitechlog software.
Image 4.2: Automatic Report Generation and Software Interface
The Elitechlog software also allows for comparison of data from multiple loggers, providing powerful analysis capabilities.
Image 4.3: Elitechlog Software for Data Comparison
5. Nlekọta
5.1 nnọchi batrị
When the battery indicator on the LCD shows low power, replace the CR2032 lithium metal battery as described in Section 3.2. Using fresh, high-quality batteries is recommended for reliable operation.
5.2 Nhicha
Iji hichaa ngwaọrụ ahụ, jiri nwayọ hichaa ya, damp cloth. Avoid using abrasive cleaners or submerging the device in water, despite its IP67 rating, to prevent damage to the USB port when the external sensor is not connected.
5.3 Nchekwa
Store the data logger in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Ensure the USB port is covered if the external sensor is not attached.
6. Nchọpụta nsogbu
- Device displays 'nC' or 'No Connection': This typically indicates an issue with the external sensor connection. Ensure the external probe is securely plugged into the USB port. If the issue persists, try gently adjusting the probe's position or checking for any debris in the port.
- 'LoBat' or Battery Icon Flashing: This indicates a low battery. Replace the CR2032 battery with a new one. Even new batteries can sometimes be faulty; try another fresh battery if the issue persists.
- No Data Recorded: Verify that recording was properly initiated by pressing and holding the left button until 'REC' appears. Ensure the battery has sufficient charge. If the device was stopped prematurely or ran out of battery, data might not be saved.
- Cannot Generate PDF Report: Ensure the data logger is connected to a computer via USB. Wait for the device to process and display 'PDF' on its screen before attempting to access the drive. If the issue continues, try a different USB port or computer.
- Software Issues (Elitechlog): If you encounter problems with the Elitechlog software, ensure you have downloaded the latest version from the official Elitech website. Refer to the software's help documentation or contact Elitech customer support.
7. Nkọwapụta
The following table outlines the technical specifications for the Elitech RC-5+ TE Digital PDF USB Temperature Data Logger:
Image 7.1: Product Specifications
| Njirimara | Nkọwapụta |
|---|---|
| Nlereanya | RC-5+ TE |
| Oke nha nha okpomọkụ | -30°C ruo +70°C (-22°F ruo 158°F) |
| Okpomọkụ ziri ezi | ±0.9°F (+4°F/+104°F); ±1.8°F (other range) ±0.5°C (-20°C/+40°C); ±1.0°C (other range) |
| Mkpebi | 0.1°C/°F |
| Ike data | 32000 points (Max) |
| Ụdị batrị | 1 x CR2032 Lithium Metal battery (included) |
| Akụkụ ngwaahịa | 3.2 x 1.3 x 0.5 sentimita asatọ |
| Ibu | 2.72 ounces |
| Njikọta | USB |
| Ụdị ngosi | LCD |
| Ọkwa mkpuchi mmiri | IP67 (when external sensor is connected) |
| nnabata | FDA 21 CFR Part 11 standard |
8. Akwụkwọ ikike na nkwado
Elitech provides a 12-month warranty for the RC-5+ TE data logger. For any technical assistance, troubleshooting, or warranty claims, please contact Elitech customer support. 24/7 customer support is available via email and phone. Refer to the official Elitech websaịtị maka nkọwa kọntaktị.
The product also includes a calibration certificate, ensuring its accuracy and compliance with industry standards.
