Okwu mmalite
This manual provides detailed instructions for the assembly, operation, and maintenance of your VEVOR Stainless Steel Prep Table. Please read this manual thoroughly before use to ensure proper setup and safe operation. This prep table is designed for various applications including kitchens, laundry rooms, garages, and commercial settings, offering a durable and versatile workspace.
Ozi nchekwa
Ịdọ aka ná ntị: Do not exceed the weight limit of 440 lbs. Always assemble and secure the table properly to prevent tipping or collapse. Ensure all components are tightly fastened before placing items on the table. Keep hands clear of moving parts during assembly and adjustment. Use caution when moving the table, especially on uneven surfaces.
Ntọala na Mgbakọ
The VEVOR Stainless Steel Prep Table is designed for quick and straightforward assembly. Follow these steps to set up your table:
- Insert Table Legs: Insert the four table legs into the pre-drilled holes on the top shelf.
- Install Undershelf: Assemble the undershelf into the columns. Ensure it is positioned at your desired height.
- Mechie akụrụngwa: Tighten all parts with the provided screws to ensure stability.
- Tinye ndị Casters: Install the four casters into the bottom of the legs. Two of the casters include brakes for securing the table in place.
Assembly can typically be completed within minutes by following the instructions.
Image: Step-by-step assembly guide for the prep table.
Ntuziaka ọrụ
Your VEVOR Stainless Steel Prep Table is designed for versatile use. Here are key operational features:
- Ike ibu: The top shelf can support up to 330 lbs (150 kg), and the undershelf can support up to 110 lbs (50 kg). Distribute weight evenly to maintain stability.
- Adjustable Undershelf: The undershelf offers 3 adjustable height levels, with distances between shelves of 16.9, 20.1, and 23.2 inches (43, 51, and 59 cm). This allows you to customize storage space for various items. To adjust, loosen the screws, reposition the shelf, and re-tighten securely.
- Mbugharị: The table is equipped with four flexible casters, two of which have brakes. Engage the brakes when the table needs to remain stationary to prevent unwanted movement.
- Azụ azụ: The 2-inch (5 cm) high backsplash helps prevent items from falling off the back of the table, enhancing safety and convenience.
Image: Illustration of the adjustable undershelf.
Image: Details on load capacity and structural support.
Nlekọta
To ensure the longevity and hygiene of your stainless steel prep table, follow these maintenance guidelines:
- Nhicha: Jiri mgbasa ozi hichaaamp cloth. For stubborn stains, use a mild detergent and rinse thoroughly. Avoid abrasive cleaners or scouring pads that can scratch the stainless steel surface.
- Nyocha oge niile: Na-elele skru na ihe njide niile mgbe niile iji hụ na ha siri ike. Na-eme ka ọ sie ike ọzọ dịka ọ dị mkpa.
- Nlekọta Caster: Debe ihe ndị e ji kpụọ ihe n'ebe dị iche iche iji hụ na ha na-agagharị nke ọma. Tee mmanụ ma ọ bụrụ na ọ dị mkpa.
Image: Features of the advanced stainless steel construction.
Nchọpụta nsogbu
This section addresses common issues you might encounter with your prep table.
- Okpokoro osisi: Ensure all leg and shelf fasteners are securely tightened. Verify that the casters are fully inserted and locked if intended to be stationary. Check for uneven flooring and adjust leg levelers if applicable (this model has casters, so ensure brakes are engaged).
- Difficulty Moving Table: Check casters for debris or damage. Ensure caster brakes are disengaged. Clean casters if necessary.
- Ọkwa shelf abụghị ọkwa: Re-adjust the undershelf by loosening its screws, ensuring it is properly aligned, and then re-tightening.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | VV-SSWT-BJL-2436 |
| Ihe onwunwe | Igwe anaghị agba nchara |
| Top Shelf Load Capacity | 330 lbs (150 n'arọ) |
| Undershelf Load Capacity | 110 lbs (50 n'arọ) |
| Akụkụ ihe (L x W x H) | 36 x 24 x 35 inch (91.4 x 61 x 89 cm) |
| Undershelf Size | 33.3 x 21.3 inch (84.5 x 54 cm) |
| Distance Between Shelves | 16.9 - 20.1 - 23.2 inch (43 - 51 - 59 cm) adjustable |
| Backsplash Ogologo | 2 inch (5 cm) |
| Table Legs Diameter | 1.9 anụ ọhịa (48 mm) |
| Ibu Ibu | 37.5 lbs (17 n'arọ) |
| Ndị na-eme ihe nkiri | 4 (2 nwere brek) |
| Ngwa gụnyere | 1 x Stainless Steel Prep Table, 1 x Pack of Accessories |
| Nlekọta ngwaahịa | Wepu Damp Akwa |
Image: Detailed product dimensions and specifications.
Ụlọ ihe nkiri mgbasa ozi
Image: VEVOR Stainless Steel Prep Table in a kitchen environment.
Image: Prep table used as a commercial food preparation station.
Foto: Angle view of the prep table with casters.
Akwụkwọ ikike na nkwado
Maka ozi akwụkwọ ikike ma ọ bụ nkwado teknụzụ, biko rụtụ aka na nkọwa kọntaktị enyere na nzụta gị ma ọ bụ gaa na VEVOR gọọmentị websaịtị. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.
