Progress Lighting AirPro 52-inch Brushed Nickel Ceiling Fan (Model P250081-009-WB) User Manual

1. Ozi nchekwa

Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or personal injury.

Nchekwa Eletriki: Ensure power is disconnected at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes.
Ịkwanye: The ceiling fan must be mounted to a structurally sound ceiling joist or outlet box capable of supporting the fan's weight (minimum 35 lbs).
Mkpochapụ agụba: Maintain a minimum clearance of 7 feet from the floor to the fan blades.
Nwụnye ọkachamara: If you are unsure about wiring or installation, consult a qualified electrician.
Atụmatụ ịdọ aka ná ntị 65: Ngwaahịa a nwere ike ikpughe gị na kemịkalụ mara steeti California na-ebute ọrịa kansa na ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ.

2. Ihe ngwugwu

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Progress Lighting customer service.

Gbawara view of ceiling fan components including motor housing, blades, light kit, and mounting hardware.

Foto 2.1: Gbawara view of the AirPro ceiling fan components. This image shows the main parts such as the motor housing, downrod, canopy, fan blades, and the light kit with shades.

Mgbakọ Ụlọ moto
Akara agba (5)
Ogwe aka (5)
Mgbakọ Kit Light
Frosted Polypropylene Shades (4)
LED Bulbs (4, 8.5-Watt, 3000K)
Downrod na Canopy
Arịọnụ mgbodo na Hardware
Pull Chains (for fan speed and light control)
Nwụnye Mpempe akwụkwọ

3. Nkọwapụta

Ụdị	Ọganihu ọkụ
Aha Nlereanya	AirPro Builder Fan
Nọmba nlereanya	P250081-009-WB
Akụkụ (D x W x H)	52" x 52" x 18.7"
Agba/Mechaa	Nickel achara acha
Ọnụọgụ agụba	5
Blade Finish Options	Grey Weathered Wood / Silver (Reversible)
Ụdị moto	moto AC
Ìhè Kit	Integrated, 4-Light
Ụdị bọlbụ	LED (8.5W, 3000K, 90CRI)
Voltage	120 volts
Ike ikuku	3330 Cubic Feet kwa nkeji
Usoro njikwa	Pull Chain (Remote accessory sold separately)
Asambodo	ENERGY STAR, Title 24 JA8 rated, UL Listed, Dry Location
Ibu Ibu	19.4 pound

Diagram showing the dimensions of the 52-inch ceiling fan: 52 inches wide, 52 inches deep, and 18.7 inches high.

Foto 3.1: Product dimensions of the AirPro 52-inch ceiling fan.

Energy Guide label for the ceiling fan, showing an estimated yearly energy cost of $10 and an airflow capacity of 3330 Cubic Feet Per Minute.

Foto 3.2: Energy Guide for the AirPro ceiling fan, highlighting energy efficiency.

4. Nwụnye

This section provides step-by-step instructions for installing your Progress Lighting AirPro ceiling fan. Refer to the included installation sheet for detailed diagrams.

Cover of the AirPro Ceiling Fan Installation Manual, showing an illustration of the fan.

Foto 4.1: Reference the official installation manual cover for detailed diagrams.

4.1 Ịkwanye Fan

Gbanyụọ Ike: Before starting, ensure the power supply to the outlet box is turned off at the circuit breaker.
Mpempe mgbago echekwabara: Attach the mounting bracket to the ceiling outlet box. Ensure the outlet box is securely fastened to the building structure and can support the fan's weight.
Kpọkọta Downrod: Insert the downrod through the canopy and connect it to the fan motor housing. Secure with the provided pin and screw.
Hang Fan: Carefully lift the fan assembly and hang it from the mounting bracket using the ball joint in the downrod.

4.2 Igwe ọkụ eletrik

Connect the fan's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting the ground wire, neutral wire, and hot wires for fan and light operation.

Jikọọ waya ala ọla kọpa na-acha akwụkwọ ndụ akwụkwọ ndụ/gbara agbagọ site na fan ahụ gaa na waya ala site na igbe mpụta.
Jikọọ waya ọcha (nke na-anọpụ iche) site na fan ahụ gaa na waya ọcha (nke na-anọpụ iche) site na igbe mpụta.
Jikọọ waya ojii (ọkụ) site na fan ahụ gaa na waya ojii (ọkụ) site na igbe mpụta.
If separate wires are available for fan and light control, connect them accordingly.

4.3 Ịtinye Mmanya Fan

Attach the five fan blades to the blade arms. The AirPro fan features reversible blades with Grey Weathered Wood on one side and Silver on the other, allowing you to choose your preferred aesthetic. The blade arms feature captive screws for easier installation.

Close-up image showing the two reversible finishes of the fan blades: Grey Weathered Wood (Side A) and Silver (Side B).

Foto 4.2: Reversible fan blade finishes: Grey Weathered Wood and Silver.

Select the desired blade finish (Grey Weathered Wood or Silver).
Attach each blade to a blade arm using the provided screws.
Secure each blade arm to the motor housing.

4.4 Installing the Light Kit

Connect the light kit to the fan motor housing and install the LED bulbs and shades.

Connect the light kit wiring to the fan's light kit wiring.
Chekwaa mgbakọ ihe ọkụ ọkụ na ala nke ụlọ fan moto.
Screw in the four included 8.5-Watt LED bulbs into the sockets.
Attach the four frosted polypropylene shades to the light kit.

5. Ọrụ

Your AirPro ceiling fan is designed for ease of use with pull chain controls for both fan speed and light. An optional remote control accessory can be purchased separately for added convenience.

5.1 Njikwa ọsọ fan

The fan speed is controlled by pulling the fan pull chain. Each pull cycles through the available speeds:

Pull 1: High Speed
Dọkpụ nke abụọ: Ọsọ dị n'etiti
Pull 3: Low Speed
Dọpụta nke 4: Gbanyụọ

5.2 Njikwa ọkụ

The integrated light kit is controlled by pulling the light pull chain. Each pull will toggle the light On or Off.

5.3 Reversing Fan Direction (Seasonal Use)

Most ceiling fans include a reverse switch on the motor housing to change the direction of blade rotation. This allows for optimal air circulation in different seasons:

Summer Operation: Blades rotate counter-clockwise, pushing air down to create a cooling breeze.
Ọrụ oyi: Blades rotate clockwise, drawing air up to circulate warm air near the ceiling.

To change direction, ensure the fan is off and completely stopped. Locate the reverse switch on the motor housing and slide it to the opposite position. Turn the fan back on.

6. Nlekọta

Nlekọta anya mgbe niile na-eme ka ogologo ndụ na ịrụ ọrụ kachasị mma nke onye na-akwado uko ụlọ gị.

Nhicha: Periodically clean the fan with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure power is off before cleaning.
Nchacha agụba: Wipe fan blades with a soft cloth to remove dust.
Ndokwa bọlbụ: The fan uses 8.5-Watt LED bulbs. When replacement is needed, ensure the power is off and allow bulbs to cool before handling. Replace with compatible LED bulbs.
Mechie skru: Check all screws, especially on the blade attachments and mounting hardware, periodically to ensure they are tight. Loose screws can cause wobbling or noise.

7. Nchọpụta nsogbu

If you experience issues with your AirPro ceiling fan, consult the following table before contacting customer service.

Nsogbu	Ihe nwere ike ime	Ngwọta
Onye ofufe anaghị ebido	Enweghị ike maka onye ofufe. Njikọ waya rụrụ arụ. Motor switch is off.	Lelee ihe nbibi/fuse sekit. Hụ na njikọ waya niile dị nchebe (gbanyụọ ya mbụ). Verify pull chain is in an "On" position.
Ìhè anaghị arụ ọrụ	Njikọ waya rụrụ arụ. Bulbs are faulty or loose. Light switch is off.	Check light kit wiring (power off first). Mee ka bọlbụ sie ike ma ọ bụ dochie ya. Verify light pull chain is in an "On" position.
Fans na-ama jijiji	kposara agụba tọgbọrọ chakoo. Akara na-enweghị nha nhata. Ihe nkwado kwụsiri ike.	Mechie skru agụba niile. Use a blade balancing kit (not included) if necessary. Hụ na e tinyere ihe nkwado ahụ nke ọma.
Ọrụ mkpọtụ	kposara rụrụ arụ. Motor hum. Blades hitting an obstruction.	Lelee ma mesie skru niile. Ensure fan is properly grounded. Verify no objects are in the blade path.

8. Akwụkwọ ikike na nkwado

8.1 Ozi akwụkwọ ikike

The Progress Lighting AirPro Ceiling Fan (Model P250081-009-WB) comes with a Akwụkwọ ikike dị afọ 30. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji na ọrụ nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

For full warranty details, please refer to the documentation included with your product or visit the official Progress Lighting websaịtị.

8.2 Nkwado ndị ahịa

If you require further assistance or have questions not covered in this manual, please contact Progress Lighting customer support:

Websaịtị: www.progresslighting.com
Ekwentị: Refer to the contact information on the Progress Lighting websaịtị ma ọ bụ nkwakọ ngwaahịa gị.

When contacting support, please have your model number (P250081-009-WB) and date of purchase readily available.

	Akwụkwọ ntuziaka nwụnye Fan na-enwe ọganihu ọkụ Ntuzi nrụnye zuru oke maka ndị na-egwu elu ụlọ na-aga n'ihu, mkpuchi iwu nchekwa, mwepu, ịrị elu, njikọ eletriki, mgbakwunye agụba, nguzozi, nrụnye ngwa ọkụ, ọrụ, nlekọta, na nchọpụta nsogbu.
	Progress Lighting Hartwick P710087-009 Brushed Nickel Wall Sconce Detailed specifications for the Progress Lighting Hartwick P710087-009 wall sconce, featuring a brushed nickel finish, etched opal glass, ADA compliance, and suitability for modern interiors. Includes dimensions, electrical, and mounting details.
	Akwụkwọ ntuziaka nwụnye Fan na-aga n'ihu P250100 Lighting Nrụnye zuru ezu na akwụkwọ ntuziaka maka Progress Lighting P250100 fan uko ụlọ. Mụta ka esi wụnye, rụọ ọrụ na idobe onye na-akwado elu ụlọ AirPro gị na ntuziaka zuru oke.
	Akwụkwọ ntuziaka nwụnye Progress Lighting AirPro P250073 Celing Fan Akwụkwọ ntuziaka nrụnye a na-enye nkọwa zuru ezu maka ịtọ na ịrụ ọrụ Progress Lighting AirPro P250073 fan uko ụlọ. Ọ gụnyere ntuziaka nchekwa, njirimara akụkụ, eserese wiring, njikwa anya, ndụmọdụ mmezi, ndụmọdụ nchọpụta nsogbu na ozi akwụkwọ ikike.
	Ntuziaka nwụnye AirPro Downrod Lighting (Model P2606-81) Ntuziaka nzọụkwụ maka ịwụnye Progress Lighting AirPro n'uko fan downrod, na-akọwapụta ojiji nke hanger atụdo na mkpọchi atụdo. Dakọtara na ụdị P2606-81.
	Akwụkwọ ntuziaka nwụnye Fan Progress Lighting AirPro Ceiling Fan Akwụkwọ ntuziaka a na-enye ntụzịaka zuru oke maka nrụnye, ịrụ ọrụ na nrụzi nke onye na-akwado elu ụlọ elu Progress Lighting AirPro. Ọ gụnyere ịdọ aka ná ntị nchekwa, ihe ọkụ eletrik na ihe arụrụ arụ, eserese wiring, ndụmọdụ nchọpụta nsogbu, na ozi akwụkwọ ikike.

Progress Lighting P250081-009-WB