Okwu mmalite
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Jetson Bolt Folding Electric Ride-On Bike. Please read this manual thoroughly before your first ride and keep it for future reference. The Jetson Bolt is a compact and lightweight electric bike designed for commuting and casual riding, featuring a 350-watt motor, twist throttle, and pedal assist.
Ozi nchekwa
Your safety is paramount. Adhere to all safety guidelines to prevent injury or damage.
- Achọrọ afọ: This product is intended for riders aged 13 years and older.
- Oke ibu: The maximum weight capacity for this bike is 265 lbs (120 kg).
- Ngwa nchekwa: Always wear a helmet, knee pads, elbow pads, and appropriate footwear (closed-toe shoes) when riding.
- Asambodo UL: The Jetson Bolt is UL-2849 certified, ensuring compliance with electrical safety standards.
- Gburugburu ebe a na-agba ịnyịnya: Do not ride near motor vehicles. This bike is not designed for competition, jumping, or off-road use. Ride on appropriate surfaces.
- Eji chaja: Only use the charger provided by Jetson for this specific model. Using an unapproved charger can be hazardous.
- Lelee tupu ịnya igwe: Before each ride, ensure brakes are functioning, tires are properly inflated, and all components are securely fastened.
Kedu ihe dị na Igbe ahụ
Upon unpacking, verify that all the following components are included:
- Jetson Bolt Electric Bike
- Chaja batrị
- Ịchaji eriri
- Akwụkwọ ntuziaka (akwụkwọ a)
Melite
1. Ịmeghe igwe kwụ otu ebe ahụ
The Jetson Bolt is designed for easy portability. To unfold the bike:
- Place the folded bike on a flat, stable surface.
- Locate the folding latch mechanism on the main frame.
- Release the latch and carefully extend the frame until it locks into place. Ensure the locking mechanism is fully engaged.
- Raise the handlebar stem and secure it with its quick-release lever.
- Unfold the pedals if they are in the folded position.
2. Adjusting the Seat and Handlebars
Proper adjustment ensures comfort and control.
- Ogologo oche: Use the quick-release lever on the seat post to adjust the seat to a comfortable height where your feet can touch the ground while seated. Secure the lever firmly.
- Ogologo Handlebar: The handlebar stem can be adjusted for optimal riding posture. Loosen the quick-release clamp, adjust to desired height, and re-secure.
3. Nchaji mbụ
Before your first ride, fully charge the battery.
- Locate the charging port on the bike.
- Connect the charger to the bike's charging port, then plug the charger into a standard wall outlet.
- Ọkụ ihe ngosi dị na chaja ga-egosikarị ọbara ọbara n'oge a na-achaji ma gbanwee akwụkwọ ndụ akwụkwọ ndụ mgbe a na-achaji ya nke ọma.
- Charging time is approximately up to 4 hours.
Ntuziaka ọrụ
1. Ịgbanye / gbanyụọ
To power on the bike, press and hold the power button located on the handlebar controls. Repeat to power off.
2. Ụdị ịnya igwe
The Jetson Bolt offers multiple riding options:
- Twist throttle: Gently twist the throttle on the right handlebar to engage the motor and accelerate. The bike can reach speeds of up to 15.5 mph using the throttle.
- Enyemaka pedal: Begin pedaling, and the motor will provide assistance, making pedaling easier. This mode extends the range significantly.
- Njikwa ụgbọ mmiri: Engage cruise control for a consistent speed without continuously holding the throttle. Refer to the LED display for activation instructions.
- Traditional Biking: You can also ride the bike by pedaling without any motor assistance.
3. breeki
The bike is equipped with dual-disc hand brakes for reliable stopping power. Squeeze both brake levers simultaneously to slow down and stop. Apply brakes smoothly to maintain control.
4. Lights and Display
- LED Headlight and Taillight: The bike features an integrated LED headlight and a strobing red taillight for increased visibility, especially in low-light conditions. Activate them via the handlebar controls.
- Ikanam Display: The handlebar-mounted LED display provides real-time information, including battery life, allowing you to monitor your charge at a glance.
Ịchaji
To charge the Jetson Bolt's 36V, 6.0 lithium-ion battery:
- Gbaa mbọ hụ na agbanyụrụ igwe kwụ otu ebe ahụ.
- Mepee mkpuchi ọdụ ụgbọ mmiri.
- Connect the charger cable to the port.
- Plug the charger into a standard electrical outlet (100-240V AC).
- The charger's indicator light will typically be red while charging and turn green when the battery is fully charged.
- A full charge takes approximately 4 hours. Do not overcharge the battery.
- Once charging is complete, disconnect the charger from the outlet first, then from the bike, and securely close the charging port cover.
Nlekọta
Regular maintenance ensures optimal performance and longevity of your Jetson Bolt.
- Nhicha: Jiri mgbasa ozi hichaa igwe kwụ otu ebe ahụamp cloth after each ride. Avoid using high-pressure water jets directly on electrical components.
- Nrụgide taya: Check tire pressure regularly. Maintain the recommended PSI (usually found on the tire sidewall) for efficient riding and to prevent flats.
- breeki: Periodically inspect brake pads for wear and ensure brake levers provide firm and responsive stopping power. Adjust or replace as needed.
- Ihe nkwụnye: Check all bolts, nuts, and quick-release levers to ensure they are securely tightened before each ride.
- Nlekọta batrị: Store the bike and battery in a cool, dry place. If storing for an extended period, charge the battery to about 50-70% and recharge every 1-2 months to prevent deep discharge.
- Ọrụ Ọkachamara: For complex repairs or adjustments, consult a qualified bike technician.
Nchọpụta nsogbu
This section addresses common issues you might encounter with your Jetson Bolt.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe igwe anaghị agba nchara | Batrị dị ala ma ọ bụ mebie Njikọ batrị tọhapụrụ Apịghị bọtịnụ ike nke ọma | Chajie batrị zuru oke Lelee njikọ batrị Press and hold the power button firmly |
| Moto anaghị etinye aka | Batrị dị ala Nsogbu nsogbu Pedal assist sensor issue | Chajịa batrị Ensure throttle is twisted correctly Check for obstructions around pedals/sensor |
| Obere ala | Taya ndị na-ebuchaghị ibu Riding conditions (hills, headwind) Onye na-agba ịnyịnya ibu Mmebi batrị | Inflate tires to recommended PSI Adjust riding style Ensure rider weight is within limits Contact support if battery life significantly decreases |
| Brekị adịghị ike | Ihe mgbochi breeki mere Loose brake cable Disc brake misalignment | Inspect and replace brake pads Gbanwee nrụgide eriri brek Consult a bike technician for adjustment |
If you encounter issues not listed here or require further assistance, please refer to the Support section.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị igwe kwụ otu ebe | Igwe igwe eletrik |
| Aha Nlereanya | Jetson Bolt |
| Nọmba nlereanya | JBLTP-BLK-OB |
| moto | 350 Watt Hub Motor |
| Batrị | 36V, 6.0 Lithium-Ion |
| Oge Nchaji | Ruo awa iri abụọ |
| Ọsọ kacha elu | 15.5 mph (25 km/h) |
| Range (Throttle) | Ruo kilomita atọ (15 km) |
| Oke (Nnyemaka Pedal) | Ruo kilomita atọ (30 km) |
| Akụkụ ịrị elu | Ruo ogo 15 |
| Ikike ibu ibu | 265 lbs (120 n'arọ) |
| Ibu ngwaahịa | 41 lbs (18.6 n'arọ) |
| Nha Wheel | 14 sentimita asatọ |
| Frame Ihe | Alloy Steel |
| Ụdị breeki | Disc (Dual Disc Brake) |
| Ụdị trotul | Twist njide |
| Akụkụ agbakọtara (L x W x H) | 46.5" x 19.3" x 23" (118 x 49 x 58 cm) |
| Akụkụ agbasaghị (L x W x H) | 46.5" x 19.3" x 38.6" (118 x 49 x 98 cm) |
| Asambodo UL | Asambodo UL-2849 |
Akwụkwọ ikike
The Jetson Bolt Folding Electric Ride-On Bike comes with a limited warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty information included with your purchase documentation or visit the official Jetson websaịtị.
Nkwado
For further assistance, technical support, or to inquire about replacement parts, please contact Jetson customer service. Contact information can typically be found on the official Jetson websaịtị ma ọ bụ na nkwakọ ngwaahịa.