SCULPFUN S30 5.5W Laser Engraver and Cutter User Manual

1. Ozi nchekwa dị mkpa

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• Nchekwa laser: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• Nchedo anya: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• Igwe ikuku: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• Nchekwa ihe: Only engrave or cut materials specified as safe for laser processing. Avoid highly reflective, flammable, or unknown materials.
• Ihe ize ndụ ọkụ: The laser can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Ụmụaka na anụ ụlọ: Keep children and pets away from the operating area. This device is not a toy.
• Nkwụsị ihe mberede: Mara onwe gị ebe na ọrụ nke bọtịnụ nkwụsị ihe mberede.

2. Ihe ngwugwu

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• Ihe nkwụnye ọkụ na eriri
• eriri USB
• Igwe nchekwa nchekwa Laser
• Tool Kit (wrenches, hex keys)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• Akwụkwọ ntuziaka (akwụkwọ a)

3. Ntuziaka Nhazi

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. Wepu akụrụngwa: Carefully remove all parts from the packaging and verify against the package contents list.
2. Mkpọkọta Frame: Connect the aluminum profiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. Jikọọ Wiring: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. Njikọ ike: Connect the power adapter to the engraver and then to a suitable power outlet.
7. Nwụnye ngwanrọ: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. Ntuziaka ọrụ

Akụkụ a na-enye nkọwa zuru okeview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

Image: Various examples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. Kwadebe Oghere Ọrụ: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. Jikọọ na Kọmputa: Connect the engraver to your computer via the USB cable.
3. Ike Na: Turn on the power switch on the engraver.
4. Mwepụta ngwanrọ: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. Nhazi Ibu: Bubata onyonyo ma ọ bụ imewe ịchọrọ file banye software.
6. Gbanwee ntọala: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. Focus Laser: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. Ihe ọnọdụ: Use the software to jog the laser head and confirm the engraving area on your material.
9. Malite ọrụ: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. Gbanyụọ: Once complete, power off the engraver and disconnect it from the computer.

5. Nlekọta

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• Igwe anya dị ọcha: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
• Clean Rails and Wheels: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• Akụkụ Ntugharị mmanụ: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• Ihe eji elele eriri: Inspect the timing belts for tension and wear. Adjust or replace if necessary.
• Laser Module Lifespan: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. Nchọpụta nsogbu

If you encounter issues with your SCULPFUN S30, refer to the following common problems and solutions:

• Enweghị mmepụta laser:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Verify laser power settings in the software.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Igwe anaghị ejikọ na kọmputa:
  • Verify USB cable connection.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• Ịkpụ/Ịkpụcha Ezughi Ezu:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN websaịtị.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN websaịtị: www.sculpfun.com