tectake L-Shaped Desk with Mobile Monitor Stand - Model 404230 Instruction Manual

Okwu mmalite

This instruction manual provides detailed guidance for the assembly, safe operation, and proper maintenance of your new tectake L-Shaped Desk, Model 404230. Please read this manual thoroughly before beginning assembly or use to ensure correct installation and to maximize the lifespan of your product.

Ịdọ aka ná ntị nchekwa dị mkpa

Ịdọ aka ná ntị:

• Ensure the desk is placed on a flat, stable surface to prevent tipping.
• Do not exceed the maximum load capacity of the desktop (200 kg) or the monitor stand (25 kg). Overloading can cause damage or injury.
• Debe obere akụkụ na ihe nkwakọ ngwaahịa n'ebe ụmụaka nọ ka ịzenarị ihe egwu na-akpagbu.
• Na-elele skru na njikọ niile mgbe niile iji hụ na ha siri ike. Mee ka ọ sie ike dịka ọ dị mkpa.
• Use only the provided hardware for assembly. Substituting parts may compromise stability.

Ihe ngwugwu

Before assembly, verify that all components listed below are present and undamaged.

• L-Shaped Desk components (desktop panels, metal frame parts)
• Mobile Monitor Stand
• Assembly hardware (screws, bolts, Allen keys, etc.)
• Akwụkwọ ntuziaka (akwụkwọ a)

Ọ bụrụ na akụkụ ọ bụla efuo ma ọ bụ mebie, biko kpọtụrụ ndị ahịa tupu ịmalite mgbakọ ahụ.

Nkọwapụta

Foto: Detailed dimensions of the tectake L-Shaped Desk and its monitor stand.

Ntuziaka Mgbakọ

Soro usoro ndị a nke ọma maka mgbakọ kwesịrị ekwesị. A na-atụ aro ka ịnwe mmadụ abụọ maka mgbakọ.

1. Wepu akụrụngwa: Jiri nlezianya wepụ akụkụ niile dị na ngwugwu ahụ. Debe ha n'elu ebe dị ọcha ma dị nro iji gbochie ọkọ.
2. Chọpụta akụkụ: Refer to the included parts diagram (if available in physical manual) and identify all metal frame pieces, desktop panels, and hardware.
3. Mkpọkọta Frame: Begin by connecting the main metal frame sections using the provided screws and Allen key. Do not fully tighten screws until all frame parts are loosely assembled.
4. Tinye panelụ desktọpụ: Place the desktop panels onto the assembled frame. Align the pre-drilled holes with the frame. Secure the panels using the appropriate screws. Once all panels are in place, gradually tighten all screws on the frame and desktop until secure.
5. Wụnye Ụkwụ Ndozi: Screw the adjustable plastic feet into the bottom of the desk legs. These can be adjusted later to level the desk on uneven surfaces.
   

   Foto: Adjustable feet for leveling the desk. Rotate to extend or retract.
6. Assemble Monitor Stand: Attach the monitor stand supports to the monitor stand panel.
   

   Foto: Detail of the monitor stand attachment. The stand clamps securely to the desktop.

7. Attach Monitor Stand to Desk: Position the assembled monitor stand on the desired section of the desktop. Secure it using the integrated clamping mechanism. The monitor stand is designed to be freely movable along the desktop.
   

   Foto: The monitor stand can be repositioned along the desk surface as needed.

8. Nyocha ikpeazụ: Ensure all connections are tight and the desk is stable before placing any items on it.

Foto: Fully assembled tectake L-Shaped Desk with monitor stand.

Ọrụ

Using the L-Shaped Desk

The tectake L-Shaped Desk provides a spacious work area designed for efficiency and comfort. Its corner configuration allows for optimal use of space, making it suitable for various office or home setups.

Na-emezi ihe nleba anya

The included monitor stand is designed to be mobile. To adjust its position:

1. Ensure no heavy items are on the monitor stand.
2. tọpụ clamping mechanisms on the underside of the monitor stand.
3. Carefully slide the monitor stand to your desired position along the desktop.
4. Mee ka clamping mechanisms securely to fix the stand in place.

Foto: Monitor placed on the adjustable stand, providing ergonomic viewelu elu.

Leveling the Desk

If your desk wobbles or is uneven, use the adjustable feet at the bottom of each leg:

1. Identify the leg(s) that need adjustment.
2. Rotate the plastic foot clockwise to lower the corner or counter-clockwise to raise it.
3. Adjust until the desk is stable and level on your floor surface.

Nlekọta na nlekọta

• Nhicha: Jiri nwayọ hichaa elu ala, damp ákwà. Zere ihe nhicha ma ọ bụ kemịkalụ siri ike, nke nwere ike imebi njedebe.
• Mwụfu: Clean up spills immediately to prevent staining or damage to the MDF panels.
• Nyochaa ngwaike: Periodically (e.g., every 3-6 months) inspect all screws and bolts. Tighten any loose connections to maintain stability and safety.
• Zere ìhè anyanwụ kpọmkwem: Prolonged exposure to direct sunlight can cause fading or warping of the desktop material.
• Nchekwa okpomọkụ: Use coasters or protective pads under hot items to prevent heat damage to the desktop surface.

Nchọpụta nsogbu

Akwụkwọ ikike na nkwado

For information regarding warranty coverage, replacement parts, or technical assistance, please refer to the purchase documentation or contact tectake customer support directly. Contact details are typically available on the manufacturer's official websaịtị ma ọ bụ site na onye na-ere ahịa gị.

Biko nwee nọmba nlereanya gị (404230) na ụbọchị ịzụrụ dị njikere mgbe ị na-akpọtụrụ nkwado.