1. Ngwaahịa gafereview
The DieseRC Radio Frequency Light Remote Control Switch system allows for wireless control of lights and other electrical appliances. It consists of a relay receiver and two remote control transmitters, operating on a 433MHz RF frequency. This manual provides instructions for installation, setup, and operation.
2. Ihe ngwugwu
- 1x Relay Receiver
- 2x Transmitters (with CR2016 batteries included)
- 1x Ntuziaka Ngwaahịa (akwụkwọ a)
3. Nkọwapụta ngwaahịa
| Oke | Uru |
|---|---|
| Onye nnata na-arụ ọrụ Voltage | AC 85V ~ 240V |
| Quiescent dị ugbu a | <5mA |
| Max Ugbu a | 10A |
| Ugboro RF | 433Mhz |
| Okpomọkụ na-arụ ọrụ | -30°C ~ +80°C |
| Ịnata Mmetụta | > 97dbm |
| Njikwa Nchekwa Dị Anya | Ruo 20 iberibe |
| Ndochi Nkwado | 1527 Learning code |
| Ọnọdụ ọrụ RF | Jụọ nnabata ikuku superheterodyne |
| Receiving Range (Open Space) | > mita 50 |
| Nhazi Pin | N / L. |
| Ụdị arụ ọrụ | Ọnọdụ obere oge / Gbanwee / Latched |
| Batrị nnyefe | 2 x CR2016 (gụnyere) |
| Wattage | 1500 watt |
| Kachasị mgbanwe ugbu a | 10 Amps |
4. Nwụnye
The receiver unit is designed for easy integration into existing electrical systems. It should be installed between the power supply and the device you wish to control (e.g., a lamp). The compact size (70*38*21 mm) allows for flexible placement. Ensure all power is disconnected before installation.
The receiver is housed in a protective box for enhanced safety. No complex wiring is required for basic operation, but professional installation is recommended for those unfamiliar with electrical work.
5. Ụdị arụ ọrụ
The receiver supports three distinct operating modes: Momentary, Toggle, and Latched. The desired mode must be set during the setup process.
5.1. Ụdị Oge
In Momentary Mode, the relay activates only while the remote button is pressed. Releasing bọtịnụ ahụ na-eme ka relay ahụ ghara ịrụ ọrụ.
- Press and hold one button on the transmitter: The connected device will turn ON.
- Release the button: The connected device will turn OFF.
5.2. Gbanwee ọnọdụ
In Toggle Mode, each press of the remote button alternates the relay's state (ON/OFF).
- Press a button on the transmitter: The connected device will turn ON.
- Pịa otu button again: The connected device will turn OFF.
Mara: The product is typically pre-set to Toggle Mode from the factory.
5.3. Ụdị Latched
Latched Mode requires two distinct buttons on the remote: one for ON and one for OFF.
- Press the "ON" button: The connected device will turn ON.
- Press the "OFF" button: The connected device will turn OFF.
Mara: This mode requires a remote with at least two distinct buttons for ON/OFF functionality.
6. Ntọlite na Pairing
To pair a transmitter with the receiver and set the operating mode, follow these steps:
6.1. Pairing for Momentary Mode
- Pịa bọtịnụ mmụta na nnata ahụ 1 oge.
- Chere ihe dịka sekọnd iri.
- Press any button on the transmitter. The pairing is successful.
6.2. Pairing for Toggle Mode
- Pịa bọtịnụ mmụta na nnata ahụ ugboro 2.
- Chere ihe dịka sekọnd iri.
- Press any button on the transmitter. The pairing is successful.
6.3. Pairing for Latched Mode
- Pịa bọtịnụ mmụta na nnata ahụ ugboro 3.
- Chere ihe dịka sekọnd iri.
- Press the desired "ON" button on the transmitter.
- Press the desired "OFF" button on the transmitter. The pairing is successful.
Mara: For Latched Mode, you need a transmitter with at least two distinct buttons to assign ON and OFF functions.
7. Ịtọgharị onye nnata
Iji hichapụ ihe niile e ji ebugharị ihe n'ime ebe nchekwa nke onye nnata:
- Pịa bọtịnụ mmụta na nnata ahụ ugboro 8 n'usoro.
- Ntọgharị ahụ na-aga nke ọma.
Ihe dị mkpa: After a reset, all previously paired remote controls will no longer function with this receiver. You will need to re-pair them following the setup instructions above.
8. Product Features and Applications
The DieseRC RF Wireless Relay Module offers robust performance and versatility:
- Mgbaàmà siri ike: The 433MHz radio frequency signal can penetrate walls, floors, and doors, providing reliable control within a 50-meter range in open areas.
- High Capacity Relay: Ejiri ya na 10 Amp relay, it can handle high-power electrical appliances up to 1500W.
- Ngwa na-adịgide adịgide: The high-quality relay is rated for over 400,000 operations, and the remote control transmitter buttons are designed for over 500,000 clicks.
- Obosara Voltage ndakọrịta: The receiver supports AC 85V~250V, making it suitable for 110V, 220V, 230V, and 240V systems.
- Nhazi kọmpat: The mini size of the receiver (70*38*21 mm) and the portable key-fob style transmitters ensure convenience and discreet installation.
This system is suitable for a wide range of applications in homes, farms, factories, offices, laboratories, and supermarkets. It can remotely control various devices such as lamps, lighting fixtures, ventilation equipment, food waste disposers, and other DIY wireless projects.
9. Transmitter Details
The remote control transmitter features a simple design for ease of use.
The transmitter includes an indicator light, a silicone button for operation, and a metal keychain for portability. It is powered by two CR2016 batteries, which are replaceable.
