Okwu mmalite
Welcome to your new Quntis Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, current time, and an alarm function. It features a sensitive touch screen and supports up to three external wireless sensors for comprehensive environmental monitoring.
Ihe ngwugwu
- 1 x Quntis Wireless Weather Station Main Unit
- 3 x Wireless External Sensors
- 1 x Akwụkwọ ntuziaka
Mara: Agbanyeghi batrị ma a ga-azụrịrị ya iche.
Ngwaahịa gafereview
The Quntis Weather Station features a clear color display and sensitive touch buttons for easy operation. The main unit displays indoor and outdoor temperature and humidity, current time, date, weather forecast, low battery indicator, and comfort level.
Figure 1: Main Unit Display and Touch Buttons - This diagram illustrates the various indicators and touch-sensitive buttons on the weather station's main display.
Each external sensor is designed for wireless transmission of temperature and humidity data to the main unit. They can be placed up to 60 meters (200 feet) away in open areas.
Figure 2: External Sensor Back Panel - Details of the external sensor's battery compartment and control switches.
Melite
1. Ịwụnye batrị
- Open the battery compartment on the back of the main unit and each external sensor.
- Insert 2 x AA batteries (not included) into the main unit, observing polarity (+/-).
- Insert 2 x AA batteries (not included) into each external sensor, observing polarity (+/-).
- Mechie akụkụ batrị ahụ nke ọma.
Ọgụgụ 3: Ntinye batrị - The main unit and sensors require AA batteries.
2. Pairing Sensors
The main unit should automatically connect with the sensors once batteries are installed. If connection is not established:
- Ensure the main unit and sensors are within range (max 60m/200ft in open air).
- On each external sensor, select a unique channel (CH1, CH2, or CH3) using the "Channel Switch" inside the battery compartment (refer to Figure 2).
- On the main unit, press and hold the "CH" touch button for 3 seconds to initiate a search for sensors. The main unit will cycle through channels and display readings once connected.
3. Initial Settings (Time, Date, Temperature Unit)
- Tọọ oge na ụbọchị: Press and hold the "SET" part of the "°C/°F SET" touch button for 3 seconds to enter time setting mode. Use the "MEM" and "CH" buttons to adjust values and "SET" to confirm and move to the next setting (Hour -> Minute -> Year -> Month -> Day).
- Họrọ nkeji okpomọkụ: Briefly touch the "°C/°F" part of the "°C/°F SET" button to switch between Celsius (°C) and Fahrenheit (°F).
Ntuziaka ọrụ
1. Ngosipụta gafereview
The main display provides a comprehensive view of environmental data:
- Okpomọkụ na iru mmiri dị n'ime ụlọ: Current readings for the main unit's location.
- Outdoor Temperature & Humidity: Readings from the currently selected external sensor.
- Amụma ihu igwe: Icons indicating predicted weather conditions (Sunny, Cloudy, Rainy, Sunset).
- Oge na Datebọchị: Oge ugbu a na ụbọchị.
- Ọkwa nkasi obi: An icon indicating the indoor comfort level based on humidity (WET: 70-95%, COM: 40-70%, DRY: 20-40%).
- Ihe ncheta batrị dị ala: An icon appears when batteries in the main unit or a sensor are low.
Figure 4: Weather Forecast Icons - The display shows predicted weather conditions.
2. Nhọrọ ọwa
Iji view data from different external sensors, briefly touch the "CH" button. The display will cycle through CH1, CH2, CH3, and then an automatic cycle mode (displaying each channel for a few seconds).
Figure 5: Switching Between Channels - Use the CH button to view data from different sensors.
3. Alarm Clock and Snooze Function
The weather station includes an alarm clock with a default 5-minute snooze function.
- Ịtọ ntọala mkpu: Press and hold the "MEM" button to enter alarm setting mode. Use "MEM" and "CH" to adjust the alarm time and "SET" to confirm.
- Mkpu na-eme ka ọ rụọ ọrụ/gbanyụọ ya: Briefly press the "MEM" button to toggle the alarm on/off. An alarm icon will appear/disappear on the display.
- Soo: When the alarm sounds, press the "Snooze/Light" button (usually located on top) to activate snooze. The alarm will sound again after 5 minutes.
- Kwụsị mkpu: To stop the alarm completely, press any button other than "Snooze/Light", or press and hold "Snooze/Light" for more than 2 seconds.
4. Max/Min Temperature and Humidity Records
The weather station records the maximum and minimum temperature and humidity values for both indoor and outdoor environments.
- Briefly touch the "MEM" button to display the maximum recorded values (MAX).
- Touch the "MEM" button again to display the minimum recorded values (MIN).
- Touch the "MEM" button a third time to return to current readings.
- To clear the MAX/MIN records, press and hold the "MEM" button for 3 seconds while MAX or MIN values are displayed.
Figure 6: Max/Min Records - Access historical temperature and humidity data.
5. Backlight Operation
To illuminate the display in low light conditions, briefly press the "Snooze/Light" button (usually on top of the unit). The backlight will activate for 8 seconds and then turn off automatically to conserve battery power.
Figure 7: Backlight Feature - Provides temporary illumination for viewing ngosi na ọchịchịrị.
Nlekọta
1. Ngbanwe batrị
When the low battery indicator appears on the display, replace the batteries in the main unit or the corresponding sensor promptly to ensure continuous operation and accurate readings.
2. Nhicha
Jiri nro, d hichaa isi ihe na ihe mmetụta.amp Ákwà. Ejila ihe nhicha akọrọ ma ọ bụ mikpuo ngwaọrụ ndị ahụ n'ime mmiri.
3. Ntinye ihe mmetụta
For optimal performance, place external sensors in a shaded, dry location away from direct sunlight and rain. Ensure they are within the 60-meter (200-foot) wireless range of the main unit, minimizing obstacles like thick walls.
Figure 8: Recommended Sensor Placement - Ọpụpụamples of suitable locations for external sensors.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ngosipụta na isi ngwaọrụ. | Batrị anwụọla ma ọ bụ etinyeghị ya nke ọma. | Lelee polarity batrị wee jiri batrị AA ọhụrụ dochie ya. |
| Outdoor readings are not displayed or inaccurate. | Sensọ anaghị aga ebe dị anya, batrị sensọ dị ala, ma ọ bụ nnyonye anya. | Move sensor closer to the main unit, replace sensor batteries, or re-pair the sensor (hold CH button on main unit). Ensure sensor is not in direct sunlight or rain. |
| Oge/Ụbọchị ezighi ezi. | Time not set or reset after battery change. | Manually set the time and date as per "Initial Settings" section. |
| Ìhè azụ anaghị arụ ọrụ. | Low main unit battery or button malfunction. | Replace main unit batteries. If issue persists, contact support. |
Nkọwapụta
- Ụdị: WDJ-JD5030120
- Akara: Quntis
- Akụkụ (Isi ngalaba): 15 x 9.5 x 1.1 cm (5.9 x 3.74 x 0.43 inch)
- Arọ: 380 grams
- Isi mmalite ike: Battery powered (2 x AA for main unit, 2 x AA for each sensor)
- Ụdị ngosi: Ihuenyo mmetụ aka
- Njikọta: Wireless (up to 3 external sensors)
- Oke ikuku: Up to 60 meters (200 feet) in open areas
- Atụmatụ pụrụ iche: Indoor/Outdoor Temperature & Humidity, Weather Forecast, Alarm Clock, Snooze Function, Max/Min Records, Backlight, Comfort Level Indicator.
Ọgụgụ 9: Akụkụ ngwaahịa - Measurements for the main unit and external sensor.
Akwụkwọ ikike na nkwado
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Quntis websaịtị. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.
