Kiwi S2205908 Cordless Drill and Accessory Set User Manual

1. Okwu mmalite

Thank you for choosing the Kiwi S2205908 Cordless Drill and Accessory Set. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

The Kiwi S2205908 (also known as Khsd 7517) is a versatile 12V cordless drill designed for various drilling and screwdriving tasks around the home and workshop. It features a maximum rotational speed of 750 RPM and comes with a 1.3 Ah Lithium-Ion battery.

2. Ntuziaka nchekwa

Na-agbaso ihe nchekwa nchekwa bụ isi mgbe ị na-eji ngwa eletrik iji belata ihe egwu nke ọkụ, ujo eletrik na mmerụ ahụ nkeonwe.

• Nchekwa mpaghara ọrụ: Debe ebe a na-arụ ọrụ ọcha na ọkụ nke ọma. Ebe mgbagwoju anya ma ọ bụ ọchịchịrị na-akpọ ihe mberede. Ejila ngwaọrụ ike rụọ ọrụ n'ime ikuku mgbawa, dị ka n'ihu mmiri ọkụ, gas, ma ọ bụ uzuzu.
• Nchekwa Eletriki: Zere mmetụ ahụ n'elu ala ala ma ọ bụ n'ala. Ewepụla ngwaọrụ ike na mmiri ozuzo ma ọ bụ ọnọdụ mmiri.
• Nchekwa nkeonwe: Always wear eye protection. Use hearing protection when operating the drill for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Iji na Nlekọta Ngwa: Amanyela ngwá ọrụ ike. Jiri ngwa ike ziri ezi maka ngwa gị. Kwụpụ plọg na isi iyi ike na/ma ọ bụ wepụ ngwugwu batrị tupu ime mgbanwe ọ bụla, ịgbanwe ngwa ma ọ bụ ichekwa ngwa ike.
• Iji na Nlekọta batrị: Chaja nke onye nrụpụta kwuru naanị chaja ahụ. Ejila batrị ndị ọzọ na ngwaọrụ ike.

3. Ihe ngwugwu

Chọpụta na ihe niile edepụtara n'okpuru dị na ngwugwu gị:

• Kiwi S2205908 Cordless Drill
• 12V 1.3 Ah Lithium-Ion Battery Pack
• Battery Charger (AC powered)
• Mpempe egwu egwu dị iche iche
• Bits Screwdriver dị iche iche
• Ihe njide ihe
• Akpa nchekwa
• Akwụkwọ ntuziaka (akwụkwọ a)

Image 1: Kiwi S2205908 Cordless Drill and Accessory Set. This image displays the yellow and black cordless drill, a 12V 1.3Ah Lithium-Ion battery, a selection of drill bits, a bit holder, and the clear plastic storage case.

4. Njirimara ngwaahịa na akụrụngwa

Familiarize yourself with the main parts of your cordless drill:

1. Chuck enweghị igodo: Maka mgbanwe ngwa ngwa na dị mfe.
2. Mgbanaka Ndozi Torque: To select the desired torque setting for screwdriving or drilling.
3. Nhọrọ gawa/Ngbanwe: To change the rotation direction.
4. Mgbanwe na-akpalite: Activates the drill and controls speed based on pressure.
5. Ngwungwu batrị: Removable 12V 1.3 Ah Lithium-Ion battery.
6. Oghere ikuku: N'ihi na moto jụrụ oyi.

Image 2: Kiwi S2205908 Cordless Drill. This image provides a detailed view of the yellow and black drill, highlighting its ergonomic handle, keyless chuck, and the 12V 1.3Ah Lithium-Ion battery pack.

5. Nhazi

5.1 Ịchaji batrị

A naghị agbacha batrị ahụ kpamkpam mgbe azụrụ ya. A na-atụ aro ka ị chajịa batrị ahụ nke ọma tupu ejiri ya na mbụ.

1. Connect the AC charger to a standard wall outlet.
2. Malite ngwungwu batrị na chaja ruo mgbe ọ pịrị na ya.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger instructions for specific light indications).
4. Once charged, disconnect the charger from the outlet and remove the battery pack.

Mara: The battery pack may become warm during charging. This is normal. Do not charge in extreme temperatures.

5.2 Ịwụnye na iwepu ngwugwu batrị

• Iji wụnye: Dozie mkpọ batrị ahụ na ala nke akukuku mmiri wee gbanye ya ruo mgbe ọ pịrị na ebe nchekwa.
• Iji wepu: Press the battery release button (if present, typically on the sides of the battery) and slide the battery pack out of the handle.

5.3 Ịwụnye na Iwepụ Bits Drill/Screwdriver

1. Ensure the drill is switched off and the forward/reverse selector is in the neutral (locked) position.
2. Rotate the keyless chuck counter-clockwise to open the chuck jaws.
3. Tinye ihe eji egwu mmiri ma ọ bụ ihe eji skrudobe achọrọ n'ime ihe ahụ, hụ na ọ dị n'etiti.
4. Rotate the keyless chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten only.
5. Iji wepu: Gbanwee mkpọ ahụ n'akụkụ aka elekere ka ọ tọghee agba wee dọpụta ntakịrị.

6. Ntuziaka ọrụ

6.1 Ntụgharị aga n'ihu/atụgharị

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening screws) and to the right for reverse rotation (removing screws). Position it in the center to lock the trigger and prevent accidental starting.

6.2 Njikwa ọsọ

The drill features variable speed control. The speed of rotation is controlled by the amount of pressure applied to the trigger switch. Pressing the trigger lightly results in lower speed, while pressing it fully results in maximum speed (up to 750 RPM).

6.3 Mgbanwe Torque

The torque adjustment ring allows you to select the appropriate torque setting for screwdriving applications. Lower settings are for smaller screws or softer materials, while higher settings are for larger screws or harder materials. The drill setting (often indicated by a drill bit icon) provides maximum torque for drilling.

6.4 Ịkwọ ụgbọ mmiri

1. Select the appropriate drill bit for the material and hole size.
2. Set the torque adjustment ring to the drill icon for maximum power.
3. Mark the drilling spot.
4. Hold the drill firmly with both hands if possible.
5. Start drilling at a low speed to prevent the bit from wandering, then increase speed as the bit engages the material.
6. Tinye kwụ ọtọ, ọbụlagodi nrụgide. Amanyela egwu egwu.

6.5 Ịkwọ ụgbọ ala

1. Họrọ obere ihe mkpuchi skru nke kwesịrị ekwesị maka isi skru ahụ.
2. Set the torque adjustment ring to a suitable setting for the screw size and material. Start with a lower setting and increase if needed.
3. Place the screwdriver bit into the screw head.
4. Apply firm, steady pressure to prevent cam-out (the bit slipping from the screw head).
5. Start at a low speed and increase as the screw drives in.

7. Nlekọta

• Nhicha: Debe oghere ikuku nke ngwaọrụ ahụ ọcha iji gbochie oke okpomọkụ. Jiri ihe dị nro, damp akwa iji hichaa mputa. Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.
• Nlekọta batrị: Store battery packs in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Recharge them periodically if not in use.
• Nchekwa: When not in use, store the drill and accessories in their original case in a dry, secure location out of reach of children.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

Kiwi products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or contact Kiwi customer service through their official websaịtị ma ọ bụ ọwa kọntaktị.

Biko dowe akwụkwọ ikike ịzụrụ ihe ọ bụla.